How Is a Brake Caliper Installed on Chrysler Aspen?

The first step is to fix the caliper adapter mount on the axle housing. After that, put the support plate onto the axle flange and tighten the bolts until you reach 64 Nm (47 ft. lbs.). After that, connect the brake cable in the parking brake lever and secure the park brake shoes. Afterward, fit the axle shaft into place and use the brake gauge to adjust the shoes against the drum. First, put on the rotor, then install the adapter that fits the caliper and finally mount the caliper. Lastly, install the whole tire and wheel assembly.

How to Effectively Remove and Replace a Brake Caliper on Chrysler Aspen?

When you want to change the brake caliper, remove the wheel and tire assembly first. After that, unhook the caliper (3) and take out the caliper adapter (2). The next step is to take out the rotor (1). Take out the axle shaft (1) and also remove the park brake shoes (1). Remove the parking brake cable (2) from the brake pedal (1). After that, take out the 2 bolts that fasten the support plate to the axle and remove the plate. Remove the caliper adapter mount (1) from the axle housing (2).

OEM Chrysler Aspen Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Calipers found

View related parts
Chrysler Aspen Caliper, Rear Passenger Side Part Number: 5179880AE
$154.61 MSRP: $230.00
You Save: $75.39 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Right; Brake Caliper
- Position: Rear Passenger Side
- Replaces: 5080560AA, 5179880AC, 5179880AB, 5179880AA, 5179880AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Caliper, Front Driver Side Part Number: 68157610AB
$206.94 MSRP: $308.00
You Save: $101.06 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left, Front Right; Brake Caliper
- Position: Front Driver Side
- Replaces: 68002703AA, 5143348AF, 5143348AD, 5143348AE, 68037144AA, 68157610AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Caliper Clip, Rear Driver Side Part Number: 5179881AE
$113.35 MSRP: $169.00
You Save: $55.65 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Brake Caliper; Caliper
- Position: Rear Driver Side
- Replaces: 5179881AA, 5179881AC, 5179881AB, 5179881AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Caliper, Front Driver Side Part Number: 68157611AB
$201.28 MSRP: $299.00
You Save: $97.72 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left, Front Right; Brake Caliper
- Position: Front Driver Side
- Replaces: 5143358AD, 68037147AA, 5143358AF, 5143358AE, 68002702AA, 68157611AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Caliper, Rear Part Number: VK056062AA
Product Specifications
- Other Name: Brake Kit - Rear Brake; Brake Caliper; Pad Kit Rear Disc Brake V - Line Kits Do Not Include Clips.; Pad Kit Rear Disc Brake; Caliper Disc Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Chrysler Aspen Brake Caliper

Choose OEM Brake Caliper that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Brake Caliper follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Aspen Brake Caliper is an important sub assembly connected with the braking system in Chrysler Aspen automobiles that are popular for their quality and effectiveness. This Brake Caliper is responsible to translate the hydraulic pressure supplied from the master cylinder into mechanical force to apply the brake pads onto the rotors to safely slow down or halt the car. Different Chrysler Aspen models use fixed and floating Brake Calipers, which are distinct in some manners. This remains the case because fixed calipers have a consistent pressure and their structure, while floating calipers might be more complex and easier to maintain, might have problems like uneven wear of pads. They have realised the importance and need for proper inspect and maintenance of the Brake Caliper in Chrysler Aspen vehicles to ensure the optimum efficiency of the car's brake system and safety of the user. Chrysler Aspen is a full size luxury type of SUV designed for a towing capacity and various models of chrysler compatible with models produced between the years 2006 and 2008. More to it, over the line are there other specifications such as the powerful 5.7L Hemi V8 engine that increases on the performances of driving and has a braking system that offers safety in the Chrysler Aspen. In particular, it is necessary to note that that BRake Caliper plays a role of the vehicle's working element and contributes to its efficiency; therefore, it can be viewed as a unique feature of the cars on the market. This Chrysler Aspen Brake Caliper is not only adds beauty into the driving experience but also strengthens the reliability of Chrysler Aspen making the car part critical to any Chrysler Aspen owner wishing to optimize their experience on the road in terms of both performance and safety.

Chrysler Aspen Brake Caliper Parts and Q&A

Caliper, Rear Passenger Side
5179880AE
Q: How Is a Brake Caliper Installed on Chrysler Aspen?
A:
The first step is to fix the caliper adapter mount on the axle housing. After that, put the support plate onto the axle flange and tighten the bolts until you reach 64 Nm (47 ft. lbs.). After that, connect the brake cable in the parking brake lever and secure the park brake shoes. Afterward, fit the Axle Shaft into place and use the brake gauge to adjust the shoes against the drum. First, put on the rotor, then install the adapter that fits the caliper and finally mount the caliper. Lastly, install the whole tire and wheel assembly.
Caliper Clip, Rear Driver Side
5179881AE
Q: How to Effectively Remove and Replace a Brake Caliper on Chrysler Aspen?
A:
When you want to change the brake caliper, remove the wheel and tire assembly first. After that, unhook the caliper (3) and take out the caliper adapter (2). The next step is to take out the rotor (1). Take out the Axle Shaft (1) and also remove the park brake shoes (1). Remove the Parking Brake Cable (2) from the brake pedal (1). After that, take out the 2 bolts that fasten the support plate to the axle and remove the plate. Remove the caliper adapter mount (1) from the axle housing (2).