You should fold both outer seats forward and remove the side shields before you manage the second row seat cover. Afterward, pull out the four bolts that hold the seat back to the floor and also remove the seat belt anchor to take out the seat back assembly. Take off the J-straps and get rid of the cover and cushion around the frame. Pull off the seat back first when you're in the outer seat. After that, take the outboard hinge bolts out and pull out the connector and the hinge. Remove the bolts and the hinge from inside the door. Sharpen the hinge pin counterclockwise so it comes loose from the tabs and, with the pin freed, tap it out of the spring and remove it. Turn the seat assembly clockwise and then take it out of the outboard hinge so it is separated from the inner hinge. In the end, remove the
Seat Cushion cover and foam from the frame of the seat.