How to Remove the Tail Pipe on Chrysler Aspen?

First, position your car on lifts and apply Mopar(R) Rust Penetrant to the bolts on the exhaust tailpipe; leave it there for 5 minutes. Then, take out the clamp connecting the exhaust pipe to the muffler (3) and grind any welds where they tacked. Take out the front insulators (1) around the exhaust pipe and, when needed, also take out the rear insulator plates (5) under the muffler. Should you need to remove the exhaust permanently, heat the connection with an oxygen/acetylene torch, then twist the tailpipe out of the muffler and remove the exhaust pipe from the muffler (2). Use safety goggles or glasses when using torches and be sure the flame does not touch any fuel lines.

How to Install a Tail Pipe on Chrysler Aspen?

Replace the band clamps before installing the exhaust because they are not meant to be used again. Take off any burrs on the exhaust pipe 2, insert the tang of the exhaust pipe into the slot in the muffler 4 and secure it in place for final application. Afterwards, mount the muffler-to-exhaust pipe clamp, but don't tighten it at this point. When removing, put in the rear muffler insulators 5 and tail pipe insulators 1. Make sure there are no areas where the exhaust touches the body panels and fix them when you find any. Set the muffler-to-exhaust pipe clamp to 61 Nm (45 ft. lbs.) when done, lower the vehicle, start it up and look for exhaust leaks, fixing them if you find any.

OEM Chrysler Aspen Tail Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tail Pipes found

View related parts
Chrysler Aspen Rear Muffler Part Number: 68044067AA
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Resonator; Muffler; Muffler And Tailpipe Exhaust
- Replaces: 52103711AE, 52103711AG, 52103711AF, 52103711AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Rear Muffler Part Number: 52855954AB
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Resonator; Muffler; Muffler And Tailpipe Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

Chrysler Aspen Tail Pipe

Choose OEM Tail Pipe that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Tail Pipe follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Aspen Tail Pipe is one of the excellent parts that signify the aspects of reliability and performance in the Chrysler Aspen models. Primarily an important component of the Chrysler Aspen engine, the tail pipe is responsible for disposing of gases from the engine to the rear of the vehicle while also boosting the model's outlook. Tail pipe can be straight or have some angle; it commonly has chromed tips that add the appearance of the luxury SUV. In this regard, compatibility across various Chrysler Aspen models such as the normal and the hybrid ones offers evidence of the modulations flexibility. The Chrysler Aspen Tail Pipe additionally contributes to the efficiency and safety of vehicles so the separate details such as debris entry and dust clouds should be taken seriously within the view of cleanness. Furthermore, the part of the exhaust system, called the tail pipe also meets functional ergonomics and unique appearance that makes the cars or vehicles in the market to stand out. In view of this, the Chrysler Aspen performs well in terms of power; a factor attributed to the presence of 4.7L V8 and 5.7L Hemi V8 engines to mention are some which are reinforced by the tail pipe hence aiding in exhaust functionality. Being an exterior piece of the exhaust system, the tail pipe not only performs a functional role but also meets formal indications of the luxury car zone introducing thus the Chrysler Aspen and remains an important option for anyone owning a car of this brand.

Chrysler Aspen Tail Pipe Parts and Q&A

Rear Muffler
68044067AA
Q: How to Remove the Tail Pipe on Chrysler Aspen?
A:
First, position your car on lifts and apply Mopar(R) Rust Penetrant to the bolts on the exhaust tailpipe; leave it there for 5 minutes. Then, take out the clamp connecting the Exhaust Pipe to the Muffler (3) and grind any welds where they tacked. Take out the front insulators (1) around the exhaust pipe and, when needed, also take out the rear insulator plates (5) under the muffler. Should you need to remove the exhaust permanently, heat the connection with an oxygen/acetylene torch, then twist the tailpipe out of the muffler and remove the exhaust pipe from the muffler (2). Use safety goggles or glasses when using torches and be sure the flame does not touch any fuel lines.
Rear Muffler
52855954AB
Q: How to Install a Tail Pipe on Chrysler Aspen?
A:
Replace the band clamps before installing the exhaust because they are not meant to be used again. Take off any burrs on the Exhaust Pipe 2, insert the tang of the exhaust pipe into the slot in the Muffler 4 and secure it in place for final application. Afterwards, mount the muffler-to-exhaust pipe clamp, but don't tighten it at this point. When removing, put in the rear muffler insulators 5 and tail pipe insulators 1. Make sure there are no areas where the exhaust touches the body panels and fix them when you find any. Set the muffler-to-exhaust pipe clamp to 61 Nm (45 ft. lbs.) when done, lower the vehicle, start it up and look for exhaust leaks, fixing them if you find any.