How to Service and Repair a Front Wiper Arm on Chrysler Aspen?

To access the front wiper arm, lift the wiper arm to a position that connects with the arm's over-center mechanism and press the wiper blade off the windshield which relieves tension from the arm's spring. After that, take off the nut or nuts holding the wiper arm or links to the pivot shaft or shafts. Should this be needed, depend on a battery terminal puller to disconnect the front wiper arm or joints from the pivot shaft or shafts. Moving on, remove the end or links of the wiper arm pivot from the pivot shaft or shafts.

How to Properly Install a Front Wiper Arm on Chrysler Aspen?

First, turn the ignition switch to On and pull the wiper control knob once to move the wiper motor to park, then install the front wiper arms. When the wiper pivots come to a stop, switch the ignition switch again to Off. The motor needs to be in park so the front wiper arms can be set in their proper position on the pivot shafts. Place the lower edge of the wiper blade inside the upper margin of the lower windshield, following the alignment lines hidden there. Relieve tension in the spring by raising the front wiper arm a little from the windshield and then push it or the arm links down over the pivot shaft. Tighten the nuts on the mounting point of the wiper arm or links to the pivot shaft or shafts until you measure 44.5 Nm (33 ft. lbs.) of torque. Spray the windshield with water, turn on the front wipers, switch the wiper knob to Off and set the wiper arms back to the correct position if needed.

OEM Chrysler Aspen Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

View related parts
Chrysler Aspen Wiper Arm, Passenger Side Part Number: 68044499AA
$125.71 MSRP: $175.00
You Save: $49.29 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiper Arm - Wiper; Windshield Wiper Arm, Right; Front Arm; Arm Wiper
- Position: Passenger Side
- Replaces: 5135556AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Wiper Arm, Rear Part Number: 5135583AA
Product Specifications
- Other Name: Arm Wiper - Rear Wiper; Back Glass Wiper Arm; Rear Arm; Arm Liftgate Wiper; Arm Rear Wiper
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Wiper Arm, Driver Side Part Number: 5135557AA
Product Specifications
- Other Name: Wiper Arm - Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Wiper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Chrysler Aspen Wiper Arm

Choose OEM Wiper Arm that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Wiper Arm follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A Chrysler Aspen Wiper Arm is the major component of any car that demonstrates dependability and high performance in Chrysler vehicles. Primarily used to join the teeth of the windshield wiper blades to the motor, the Wiper Arm guarantees that the windshield remains free from rainy, snowy, or icy conditions so as to enable safe driving when it is misting or raining. This essential mechanism is almost always an integrant of the wiper link assembly, so as to turn the rotational motion of the wiper motor into the sweeping movement across the glass. This kind of product enhances elements have suitable wiper arm components for different models of the Chrysler Aspen, making sure that all organizational functions are sufficiently met. It helps in improving the wiper system of the Chrysler Aspen and especially the general safety of the car, making it important for any Aspen car owner. Wiper Arm has several distinguishing characteristics: It is built to last and is designed to be worn and tear with the intensity of usage; the arm and blades that connect directly are designed with great precision to make the sweep as smooth as possible so that it does not affect the blades negatively. The Chrysler Aspen which has some of the noteworthy features such as flexibility of interior space and high performing engine is favored by the Wiper Arm and sets it out from the competition. Nevertheless, Chrysler Aspen Wiper Arm can enhance the visions on the road by preventing the formation of rain, sleet, or other kinds of precipitation, making the ride safer for every driver.

Chrysler Aspen Wiper Arm Parts and Q&A

Wiper Arm, Driver Side
5135557AA
Q: How to Service and Repair a Front Wiper Arm on Chrysler Aspen?
A:
To access the front wiper arm, lift the wiper arm to a position that connects with the arm's over-center mechanism and press the Wiper Blade off the windshield which relieves tension from the arm's spring. After that, take off the nut or nuts holding the wiper arm or links to the pivot shaft or shafts. Should this be needed, depend on a battery terminal puller to disconnect the front wiper arm or joints from the pivot shaft or shafts. Moving on, remove the end or links of the wiper arm pivot from the pivot shaft or shafts.
Wiper Arm, Passenger Side
68044499AA
Q: How to Properly Install a Front Wiper Arm on Chrysler Aspen?
A:
First, turn the ignition switch to On and pull the wiper control knob once to move the Wiper Motor to park, then install the front wiper arms. When the wiper pivots come to a stop, switch the ignition switch again to Off. The motor needs to be in park so the front wiper arms can be set in their proper position on the pivot shafts. Place the lower edge of the Wiper Blade inside the upper margin of the lower windshield, following the alignment lines hidden there. Relieve tension in the spring by raising the front wiper arm a little from the windshield and then push it or the arm links down over the pivot shaft. Tighten the nuts on the mounting point of the wiper arm or links to the pivot shaft or shafts until you measure 44.5 Nm (33 ft. lbs.) of torque. Spray the windshield with water, turn on the front wipers, switch the wiper knob to Off and set the wiper arms back to the correct position if needed.