How is the Wiper Motor Installed on Chrysler Aspen?

Before installing the wiper motor, be sure the rivet nut 4 connecting the front wiper module 6 to the left front fender ledge is set properly and is in good shape. Secure the front wiper module on top of panel 1, over the cowl plenum. Place the module bracket on the panel and fender ledge and attach it with the three screws 2 until the torque reading is 8 Nm (72 in. lbs.). Install and tighten screw 3 which holds the module bracket and the center bracket of the cowl grille support to the cowl plenum panel to 8 Nm. Put the wire harness connector 5 back onto the front wiper motor connector and put the cowl plenum cover/grille panel on the front wiper module. Secure the two front wiper arms to the wiper bracket pins and plug in the battery's negative connector.

How to Remove a Wiper Motor on Chrysler Aspen?

Before you can remove the front wiper motor, unhook and separate the negative battery cable. After that, take off the front wiper arms from their spots on the pivots and take out the grille panel over the wiper unit. Begin by separating the wire harness connector (5) from the front wiper motor connector, next remove the screw (3) that holds the front wiper module bracket (6) and the center bracket of the cowl grille support (7) to the cowl plenum panel (1). Once that is done, get rid of the three screws (1) holding the module bracket to the cowl plenum panel and the left front fender ledge. Lastly, remove the wiper module from the engine compartment all together.

OEM Chrysler Aspen Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
Chrysler Aspen Wiper Motor Part Number: 5135058AD
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Front Motor
- Replaces: 5135058AB, 5135058AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Rear Motor Part Number: 55077823AF
Product Specifications
- Other Name: Motor - Rear Window Wiper; Back Glass Wiper Motor; Motor; Motor Rear Window Wiper; Wiper Motor
- Position: Rear
- Replaces: 55077823AE, 55077823AD, 55077823AC, 55077823AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Chrysler Aspen Wiper Motor

Choose OEM Wiper Motor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Wiper Motor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Wiper Motor is one of the components that can factor the performance and overall safety of Chrysler Aspen vehicles. This Wiper Motor boasts of its quality to provide the drivers clear visibility by removing the rain, snow, and any dirt on the window as it is popularly known. The Wiper Motor operates at different speeds and this makes it to adjust the movement of the wipers to different weather conditions. Suitable for a variety of Aspen models manufactured in 2006 through 2008, this Wiper Motor is offered brand new, as well as refurbished - thus, meeting the expectations of consumers who appreciate quality, as well as price flexibility. Beyond the physical anatomy, the Wiper Motor has a greater importance since it can boost the efficiency of driving during unfavourable weather conditions. The unique aspects, which can be described as its structural strength or the ability to work on electric power, can be credited for Wiper Motor's competitive standing in the marketplace. It is among the unique Wiper Motor that stands tall with an impressive reputation anchored on durability and impressive performance, making it important to have the Wiper Motor if you own the Chrysler Aspen in order to guarantee the over all efficiency that comes with having a vehicle that is well prepared to deal with the harsh weather conditions. All in all, it should be noted that Wiper Motor only enhances the quality of drive, and at the same time, reflects the company's priorities for designing cars that are unique, efficient and well-built.

Chrysler Aspen Wiper Motor Parts and Q&A

Wiper Motor
5135058AD
Q: How is the Wiper Motor Installed on Chrysler Aspen?
A:
Before installing the wiper motor, be sure the rivet nut 4 connecting the front wiper module 6 to the left front fender ledge is set properly and is in good shape. Secure the front wiper module on top of panel 1, over the cowl plenum. Place the module bracket on the panel and fender ledge and attach it with the three screws 2 until the torque reading is 8 Nm (72 in. lbs.). Install and tighten screw 3 which holds the module bracket and the center bracket of the cowl grille support to the cowl plenum panel to 8 Nm. Put the wire harness connector 5 back onto the front wiper motor connector and put the cowl plenum cover/grille panel on the front wiper module. Secure the two front Wiper Arms to the wiper bracket pins and plug in the battery's negative connector.
Rear Motor
55077823AF
Q: How to Remove a Wiper Motor on Chrysler Aspen?
A:
Before you can remove the front wiper motor, unhook and separate the negative battery cable. After that, take off the front Wiper Arms from their spots on the pivots and take out the grille panel over the wiper unit. Begin by separating the wire harness connector (5) from the front wiper motor connector, next remove the screw (3) that holds the front wiper module bracket (6) and the center bracket of the cowl grille support (7) to the cowl plenum panel (1). Once that is done, get rid of the three screws (1) holding the module bracket to the cowl plenum panel and the left front fender ledge. Lastly, remove the wiper module from the engine compartment all together.