How to Locate, Remove, and Install a Blower Motor Resistor on Chrysler Cirrus?

You can find the blower motor resistor on the lower right side wall of the heater housing. To take it out, start by removing the lower right underpanel silencer/duct, after that disconnect the wiring connections on the blower motor resistor and remove the screws that hold it in place. After unfastening the resistor's wire, take out the blower motor resistor from inside the heater housing. When installing, follow the same actions in reverse order.

OEM Chrysler Cirrus Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
Chrysler Cirrus Resistor Part Number: 4885845AA
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Replaces: 4885844AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

Chrysler Cirrus Blower Motor Resistor

Choose OEM Blower Motor Resistor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Blower Motor Resistor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Cirrus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cirrus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Cirrus Blower Motor Resistor Parts and Q&A

Resistor
4885845AA
Q: How to Locate, Remove, and Install a Blower Motor Resistor on Chrysler Cirrus?
A:
You can find the blower motor resistor on the lower right side wall of the heater housing. To take it out, start by removing the lower right underpanel silencer/duct, after that disconnect the wiring connections on the blower motor resistor and remove the screws that hold it in place. After unfastening the resistor's wire, take out the blower motor resistor from inside the heater housing. When installing, follow the same actions in reverse order.