How to Replace an Evaporator Core on Chrysler Cirrus?

For replacing the evaporator core, first take out the negative remote cable from the battery. The refrigerant should be removed from the system first, with a refrigerant recovery machine, before you remove the Heater A/C housing. Remove the A/C housing next, then unscrew the inlet cover of the recirculation door and pull away the evaporator temperature probe. . Remove the clips that join the evaporator housing to the heater/distribution housing and take off the evaporator housing from the heater/distribution housing. When that's done, remove the seal surrounding the evaporator tube and the upper part of the housing. Lift the evaporator out from its lower place, pull off the surroundings styrofoam and place the evaporator sensor in exactly the same spot on the new evaporator. When putting the instrument in, perform the last steps in reverse order.

OEM Chrysler Cirrus Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Evaporators found

View related parts
Chrysler Cirrus Evaporator Core Part Number: 5013064AD
Product Specifications
- Other Name: Evaporato - A/C; Case Assembly; Evaporator
- Replaces: 5013064AB, V9900004AB, 5013064AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 2.0L L4, 2.4L L4, 2.5L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Cirrus Case Assembly Part Number: 5013064AA
Product Specifications
- Other Name: Evaporato - A/C; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator; Evaporator A/C
- Replaced by: 5013064AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chrysler Cirrus | LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

Chrysler Cirrus Evaporator

Choose OEM Evaporator that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Evaporator follows strict manufacturing steps to lock in quality and fit. If your Chrysler Cirrus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cirrus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Evaporator in Chrysler Cirrus vehicle is one of the main parts that remove heat for the vehicle cabin air conditioning system. Sited underneath the dashboard, it works with the aid of the air flow over the metal fins of aluminum while converting from liquid to vapor the refrigerant. In doing so it not only cools the air, but evaporatively cools and dehumidifies it, and this you will typically see water pooling around the vehicle. The Chrysler Cirrus Evaporators are mostly formed from aluminum materials and the evaporators consist of few tubes some of which are covered with fins. It may necessitate change because they often have cracked septic systems and are susceptible to leaking because of age, frequent change of temperatures as well as build up of debris that may lead to corrosion. The main work of the Evaporator does not differ significantly from one model to another and is centered on absorbing heat and eliminating moisture so that the owner of Chrysler Cirrus automobiles drives in comfort.

Chrysler Cirrus Evaporator Parts and Q&A

Evaporator Core
5013064AD
Q: How to Replace an Evaporator Core on Chrysler Cirrus?
A:
For replacing the evaporator core, first take out the negative remote cable from the battery. The refrigerant should be removed from the system first, with a refrigerant recovery machine, before you remove the Heater A/C housing. Remove the A/C housing next, then unscrew the inlet cover of the recirculation door and pull away the evaporator temperature probe. . Remove the clips that join the evaporator housing to the heater/distribution housing and take off the evaporator housing from the heater/distribution housing. When that's done, remove the seal surrounding the evaporator tube and the upper part of the housing. Lift the evaporator out from its lower place, pull off the surroundings styrofoam and place the evaporator sensor in exactly the same spot on the new evaporator. When putting the instrument in, perform the last steps in reverse order.