OEM Chrysler Cirrus Wiper Blade

Chrysler Cirrus Wiper Blade Parts and Q&A

• Blade
  5012357AB
  Q: How to Service and Repair a Wiper Blade on Chrysler Cirrus?

  A:

  Before changing the wiper blade, turn the wiper switch ON and move the wipers conveniently across the windshield by switching the ignition ON and OFF more than once. Once the wipers are in place, turn the ignition OFF. After that, lift the wiper arm to lift the blade away from the windshield. By pushing on the release tab below the arm tip and sliding, take out the blade assembly. You should point the air foil of the driver's side wiper blade downward as you put it on. Gently attach the arm tip of the wiper back to the windshield. If installing, work backwards through the steps you used for removal. With all that done, turn ON the ignition, turn OFF the wiper switch and then turn OFF the ignition.
• Wiper Blade, Passenger Side
  5018262AA
  Q: How to Enhance Wiper Blade Performance and Solve Streaking or Chattering Problems on Chrysler Cirrus?

  A:

  Because wiper blades are always in contact with the weather, it's wise to clean off debris from the road and salt every few months. Wipe the wiper blades, arms and windshield with a sponge or cloth together with a light detergent or cleaner that does not scratch. Replace your wiper blades if you find streaking or smearing has not gone away. The wiper blade ought to work smoothly over the windshield, both in one direction and in the opposite one, with a slight rollover over the center when it reverses. A wiper blade that misses some areas or produces a vibrating sound could be due to flexible wiper insert or a weak spring. If wiper blades are less than a year old and their spring is enough, but they chatter, it may be because they do not lie over the center, so you need to adjust the wiper alignment.