How to Maintain the Power Steering Reservoir on a 2.7 Liter Engine on Chrysler Concorde?

Prior to servicing the power steering reservoir on the 2.7 liter engine, start by taking out the power steering pump. After that, remove the three bolts keeping the reservoir attached to the pump and remove the reservoir by pulling it out. It is important to put lubrication on the O-ring seal using fresh clean power steering fluid and while doing this, press the nipple of the reservoir into the pump without twisting it. After finishing the other steps, ensure the bolt on the pulley side is tightened to 13 Nm (115 inch lbs.) and the bolts on the rear side are tightened to 24 Nm (212 inch lbs.). In the end, reconnect the power steering pump to the engine.

How to Replace the Power Steering Reservoir on a 2.7 Liter Engine on Chrysler Concorde?

Before you can change the reservoir, unbolt and remove the power steering pump from the engine. Then, detach the power steering reservoir by first using wrenches to remove the 3 bolts holding it to the pump and then pulling out the reservoir straight away. While installing the reservoir, first grease the o-ring seal with fresh fluid, then press the nipple straight inside the pump so there is no twisting. With the reservoir in place, install the three bolts that secure it to the pump so that the bolt for the pulley side is set to 13 Nm (115 inch lbs.) and the bolts for the back are meant to be tightened to 24 Nm (212 inch lbs.). You should also reposition the power steering pump on the engine.

OEM Chrysler Concorde Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Power Steering Reservoirs found

View related parts
Chrysler Concorde Reservoir Part Number: 4772456AD
Product Specifications
- Other Name: Reservoir - Power Steering Pump; Power Steering Reservoir; Reservoir Power Steering Pump With Cap; Reservoir Power Steering Pump
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LXi, Limited | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Reservoir Part Number: 5011239AA
Product Specifications
- Other Name: Reservoir - Power Steering Pump; Power Steering Reservoir; Reservoir Power Steering Pump With Cap; Reservoir Power Steering Pump
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX | 6 Cyl 2.7 L GAS
View related parts
Chrysler Concorde Reservoir Part Number: 4695521
Product Specifications
- Other Name: Reservoir - Power Steering; Power Steering Reservoir; Reservoir Power Steering Pump; Reservoir, Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

Chrysler Concorde Power Steering Reservoir

Choose OEM Power Steering Reservoir that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Power Steering Reservoir follows strict manufacturing steps to lock in quality and fit. If your Chrysler Concorde matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Concorde parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Concorde Power Steering Reservoir makes a huge difference in the efficiency and dependability of the power steering of Chrysler Concorde. This Power Steering Reservoir helps to sustain appropriate pressure of the power steering fluid that provides smooth operation of the steering column; this is very important for comfort while driving. The car, Chrysler Concorde was manufactured between 1993 and 2004 with a stunning outlook and performance complimenting it; the Power Steering Reservoir works hand in hand with this reputation. This product including the Power Steering Reservoir is linked to several Concorde models that has ensured steering control with better efficiency and safety when on the road. Due to its endurance and solid operations, this makes it a point of call in the automotive industry to enable drivers perform their tasks without being hindered by a faulty GPS. Also, the Power Steering Reservoir is usually sold separately or may be included in the power steering replacement kits that may comprise power steering lines and hoses among other items. This adaptability clearly highlights the role of the rubber bushing in maintaining the general soundness of Chrysler Concorde's steering system. Being a functional component with its distinct characteristics and versatility in terms of being compatible with various car models, the Chrysler Concorde Power Steering Reservoir enhances the capabilities of the vehicle as well as the company's vision of providing the optimal in automobile technology and design.

Chrysler Concorde Power Steering Reservoir Parts and Q&A

Reservoir
5011239AA
Q: How to Maintain the Power Steering Reservoir on a 2.7 Liter Engine on Chrysler Concorde?
A:
Prior to servicing the power steering reservoir on the 2.7 liter engine, start by taking out the Power Steering Pump. After that, remove the three bolts keeping the reservoir attached to the pump and remove the reservoir by pulling it out. It is important to put lubrication on the O-ring seal using fresh clean power steering fluid and while doing this, press the nipple of the reservoir into the pump without twisting it. After finishing the other steps, ensure the bolt on the pulley side is tightened to 13 Nm (115 inch lbs.) and the bolts on the rear side are tightened to 24 Nm (212 inch lbs.). In the end, reconnect the power steering pump to the engine.
Reservoir
4772456AD
Q: How to Replace the Power Steering Reservoir on a 2.7 Liter Engine on Chrysler Concorde?
A:
Before you can change the reservoir, unbolt and remove the Power Steering Pump from the engine. Then, detach the power steering reservoir by first using wrenches to remove the 3 bolts holding it to the pump and then pulling out the reservoir straight away. While installing the reservoir, first grease the o-ring seal with fresh fluid, then press the nipple straight inside the pump so there is no twisting. With the reservoir in place, install the three bolts that secure it to the pump so that the bolt for the pulley side is set to 13 Nm (115 inch lbs.) and the bolts for the back are meant to be tightened to 24 Nm (212 inch lbs.). You should also reposition the power steering pump on the engine.