How to Install an A/C Hose in a Refrigerant System on Chrysler Crossfire?

Installing the liquid line means linking it to the condenser and fastening it up to 24 Nm (18 ft. lbs.) and then linking it to the receiver/dryer and tightening it to 17 Nm (12 ft. lbs.). Keep the installation free of kinks and sharp bends, curve the flexible hose at a radius that is at least 10 times the hose's diameter and keep the lines at least 80 millimeters (3 inches) from the exhaust manifold. All refrigerant system connections should be tight and not allow any leaks and the flexible hose lines should be closely inspected at least once per year. Once you've mounted the liquid line, next, set up the front inner wheel well panel and the left front wheel and tire assembly and finally, charge the A/C system.

How to Service an A/C Hose in the HVAC System on Chrysler Crossfire?

First, use an evacuation machine to clear the A/C system and then raise the vehicle and prop it up with supports. Take out the left front wheel and tire and then remove the front inner wheel well panel. Unhooks the liquid line (1) from the receiver/dryer and the condenser. While installing, avoid making the liquid line (1) turn sharply, since this can reduce the capacity of the air conditioning system; bend it to give a minimum ten times its diameter and place the flexible hose refrigerant lines a minimum of 80 millimeters (3 inches) from the exhaust manifold. Double-check that everything is free from air leaks and tight enough under pressure and install the liquid line (1) to the condenser, tightening it to 24 N.m (18 ft. lbs.) and next to the receiver/dryer, tighten it to 17 N.m (12 ft. lbs.). Afterwards, place the inner wheel well panel beneath the front driver's side fender, insert the left front wheel and tire assembly back on and recharge the A/C system.

OEM Chrysler Crossfire A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Hoses found

View related parts
Chrysler Crossfire Suction Hose Part Number: 5099344AA
Product Specifications
- Other Name: Line - A/C Suction; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line; Line A/C Suction Compressor To H - Block
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Discharge Hose Part Number: 5099342AA
Product Specifications
- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line; Line A/C Discharge Compressor To Condenser
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire A/C Line Part Number: 5099062AA
Product Specifications
- Other Name: Line - Receiver/Drier To Expansion; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Line; Line Receiver/Drier To Expansion Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Hose & Tube Assembly Part Number: 5099060AA
Product Specifications
- Other Name: Line - Expansion Valve To Compress; A/C Manifold Hose Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Line Expansion Valve To Compressor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Liquid Line Part Number: 5099059AA
Product Specifications
- Other Name: Line - Condenser To Receiver/Drier; A/C Refrigerant Liquid Hose; A/C Hose; A/C Tube; Line Condenser To Receiver/Drier
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

Chrysler Crossfire A/C Hose

Choose OEM A/C Hose that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each A/C Hose follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A/C Hose is an automotive spare part used in Chrysler Crossfire vehicles for efficiency in its air conditioning system. This A/C Hose helps in the transportation of refrigerant, which plays a central role in the removal of heat from the vehicle cabin space and provision of a good climate interior. Since it is designed to handle pressures developed by refrigerant in its gaseous state, the A/C Hose incorporates aluminum fittings on both ends of the hose, crimped, to minimize the risk of leaks and to increase efficiency. Given it can fit into different models of Chrysler Crossfire, it is an essential aspect in the auto market as it is part of the instrument that is used in the air conditioning system which enhances efficiency and safety. Besides durability, the construction of the A/C Hose makes it to be very efficient in the performance of the air conditioning system for Chrysler Crossfire. Also, the A/C Hose plays such a crucial role in making the Car comfortable during testing weather conditions on road. As with other mechanical componentry of the Chrysler Crossfire, the A/C Hose is a perfect example of the sturdiness and basic functionality for which Chrysler is known and which helped it become a significant market player. In general, A/C Hose is one of the components that improve the driving experience while remaining the innovative reputation of Chrysler Crossfire as worthy option for car lovers who value both the car's design and its functionality.

Chrysler Crossfire A/C Hose Parts and Q&A

Discharge Hose
5099342AA
Q: How to Install an A/C Hose in a Refrigerant System on Chrysler Crossfire?
A:
Installing the liquid line means linking it to the condenser and fastening it up to 24 Nm (18 ft. lbs.) and then linking it to the receiver/dryer and tightening it to 17 Nm (12 ft. lbs.). Keep the installation free of kinks and sharp bends, curve the flexible hose at a radius that is at least 10 times the hose's diameter and keep the lines at least 80 millimeters (3 inches) from the Exhaust Manifold. All refrigerant system connections should be tight and not allow any leaks and the flexible hose lines should be closely inspected at least once per year. Once you've mounted the liquid line, next, set up the front inner wheel well panel and the left front wheel and tire assembly and finally, charge the A/C system.
Hose & Tube Assembly
5099060AA
Q: How to Service an A/C Hose in the HVAC System on Chrysler Crossfire?
A:
First, use an evacuation machine to clear the A/C system and then raise the vehicle and prop it up with supports. Take out the left front wheel and tire and then remove the front inner wheel well panel. Unhooks the liquid line (1) from the receiver/dryer and the condenser. While installing, avoid making the liquid line (1) turn sharply, since this can reduce the capacity of the air conditioning system; bend it to give a minimum ten times its diameter and place the flexible hose refrigerant lines a minimum of 80 millimeters (3 inches) from the exhaust manifold. Double-check that everything is free from air leaks and tight enough under pressure and install the liquid line (1) to the condenser, tightening it to 24 N.m (18 ft. lbs.) and next to the receiver/dryer, tighten it to 17 N.m (12 ft. lbs.). Afterwards, place the inner wheel well panel beneath the front driver's side fender, insert the left front wheel and tire assembly back on and recharge the A/C system.