How to Service the Exhaust Pipe on Chrysler Crossfire?

Before fixing the catalytic converter, allow enough time for the exhaust system to cool because the catalytic converter is very hot when working. The first step is to get the vehicle up and stable. Remove the connectors from the oxygen sensor harness at 6 and 7 and then place the exhaust under support. Remove the bolts at flanges 8 and 9 at the sides, then remove the center flange bolts 3. After that, remove both the left and right exhaust pipes, marked as 5 and 10. Remove the bolts 1 from the right side exhaust pipe flange.

How to Install Exhaust Pipes at the Front on Chrysler Crossfire?

Look over the manifold flange and if it's damaged, replace it before installing the front exhaust pipes. At first, fix bolts at the exhaust pipe flange by the right side (11) and tighten them to the recommended 20 Nm (15 ft. lbs.). After putting the front exhaust pipes in the vehicle, bolt down the left and right flanges of the exhaust manifolds (8 and 9), then bolt the center exhaust manifold flange (3). Fasten all exhaust manifold bolts to a torque of 20 Nm (15 ft. lbs.) and tighten the bolts at the center exhaust pipe to the same value. After that, assemble the harness connectors 6 and 7 and guide the oxygen sensor wire harness into the harness retainer. After that, get rid of the exhaust holders and let the vehicle sit on its wheels.

OEM Chrysler Crossfire Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Exhaust Pipes found

View related parts
Chrysler Crossfire Catalytic Converter, Passenger Side Part Number: 5114404AA
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Right; Converter Catalytic
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Muffler & Pipe Assembly Part Number: 5161456AA
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Pipe; Muffler And Tailpipe Exhaust; Muffler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler Crossfire | Base, Limited | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Muffler & Pipe Part Number: 5135436AA
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Pipe; Muffler & Pipe Assembly; Muffler And Tailpipe Exhaust; Muffler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler Crossfire | SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Catalytic Converter, Passenger Side Part Number: 5135433AA
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Right; Pipe Exhaust To Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler Crossfire | SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Catalytic Converter, Driver Side Part Number: 5135432AA
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Left; Pipe Exhaust To Manifold; Converter Catalytic
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler Crossfire | SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Muffler & Pipe Part Number: 5097423AA
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Pipe; Muffler & Pipe Assembly; Muffler And Tailpipe Exhaust; Muffler Exhaust; Muffler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Catalytic Converter, Driver Side Part Number: 5114403AA
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Left; Converter Catalytic
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited | 6 Cyl 3.2 L GAS

Chrysler Crossfire Exhaust Pipe

Choose OEM Exhaust Pipe that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Exhaust Pipe follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Crossfire Exhaust Pipe is one of the most vital car parts that serve as the basis for a car's reliable and efficient work. Specifically, to prevent the flow of toxic gases like carbon monoxide in the engine, exhaust pipes promote the right discharge of these gases which can prove fatal for the occupants if allowed in the engine compartment or cabin hence increasing safety for all occupants. Designed to fit most Chrysler Crossfire models, this exhaust pipe links with other systems/components of the Crossfire exhaust system such as the muffler and the catalytic converter, with the aim of safely expelling fumes emitted by the vehicle's engine. Usually situated at the left side for the US models, it provides a convenient place with ample capability to work; however, the obvious fact is that its nature of being exposed adds it to the list of defective areas susceptible to failure due to accidents as well as corrosion. Chrysler Crossfire Exhaust Pipe needs to be maintained often so as not to produce rattling or exhaust leaks which can hamper the performance as well as the safety of the car. Firstly, design of the exhaust pipe can be different while some more sporty cars can have several pipes and that improves not only the look but sound of the car too. Chrysler Crossfire has a rather controversial positioning on the automotive market but together with the stylish design and engineering this car is quite efficient and safe thanks to its exhaust pipe. These features seal the Chrysler Crossfire as a unique and exceptional car with the aesthetics and performance for a real sports car matched with the contemporary automotive engineering.

Chrysler Crossfire Exhaust Pipe Parts and Q&A

Catalytic Converter, Passenger Side
5114404AA
Q: How to Service the Exhaust Pipe on Chrysler Crossfire?
A:
Before fixing the Catalytic Converter, allow enough time for the exhaust system to cool because the catalytic converter is very hot when working. The first step is to get the vehicle up and stable. Remove the connectors from the Oxygen Sensor harness at 6 and 7 and then place the exhaust under support. Remove the bolts at flanges 8 and 9 at the sides, then remove the center flange bolts 3. After that, remove both the left and right exhaust pipes, marked as 5 and 10. Remove the bolts 1 from the right side exhaust pipe flange.
Muffler & Pipe
5097423AA
Q: How to Install Exhaust Pipes at the Front on Chrysler Crossfire?
A:
Look over the manifold flange and if it's damaged, replace it before installing the front exhaust pipes. At first, fix bolts at the exhaust pipe flange by the right side (11) and tighten them to the recommended 20 Nm (15 ft. lbs.). After putting the front exhaust pipes in the vehicle, bolt down the left and right flanges of the exhaust manifolds (8 and 9), then bolt the center exhaust manifold flange (3). Fasten all exhaust manifold bolts to a torque of 20 Nm (15 ft. lbs.) and tighten the bolts at the center exhaust pipe to the same value. After that, assemble the harness connectors 6 and 7 and guide the oxygen sensor wire harness into the harness retainer. After that, get rid of the exhaust holders and let the vehicle sit on its wheels.