How to Service and Install an Oxygen Sensor and Engine Cover on Chrysler Crossfire?

Before servicing the upstream O2 sensor, first put a small amount of anti-seize compound on the threaded portion of the sensor. Place the O2 sensor onto the exhaust and tighten it until you reach 50 Nm (37 ft. lbs.). After that, link the O2 sensor harness connector. Align the clips with the rubber mounts on the engine cover and then press firmly to secure it. Lubricating the rubber mounts a little can make it easier to install the engine cover. After that, join the negative battery cable to the frame.

How to Maintain the Upstream Oxygen Sensor on Chrysler Crossfire?

The first thing to do in servicing the upstream O2 sensor is to remove the negative battery cable. After that, hold both corners of the cover and carefully pull it upwards to remove it. Then, take out the O2 sensor sensor harness connector and continue with removing the O2 sensor itself (1). The left side sensor is represented and the right is much the same as well.

OEM Chrysler Crossfire Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Oxygen Sensors found

View related parts
Chrysler Crossfire Oxygen Sensor, Rear Passenger Side Part Number: 5099821AA
$75.42 MSRP: $985.00
You Save: $909.58 (93%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear Right; Sensor Oxygen
- Position: Rear Passenger Side
- Replaces: 5099821AB, 5099821AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Oxygen Sensor, Rear Driver Side Part Number: 5099817AA
$572.81 MSRP: $816.00
You Save: $243.19 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear Left; Lambda Sensor; Sensor Oxygen
- Position: Rear Driver Side
- Replaces: 5099817AB, 5099817AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Oxygen Sensor, Front Part Number: 5099820AA
$496.00 MSRP: $1060.00
You Save: $564.00 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Lambda Sensor; Sensor Oxygen
- Position: Front
- Replaces: 5099820AC, 5099820AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Oxygen Sensor Part Number: 5099816AA
Product Specifications
- Other Name: Sensor - Oxygen
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Oxygen Sensor Part Number: 5099818AA
Product Specifications
- Other Name: Sensor - Oxygen
- Replaces: 5099818AC, 5099818AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

Chrysler Crossfire Oxygen Sensor

Choose OEM Oxygen Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Oxygen Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Crossfire Oxygen Sensor is an important part that improves the functionality of Chrysler crossfire cars. Being extremely reliable this Oxygen Sensor exhaustively measures the content of unburned oxygen and controls the air-fuel mixture in order to enhance the engine performance and lower the emission levels. Generating a voltage signal proportional to the range of oxygen concentration, Chrysler Crossfire Oxygen Sensor enables the engine control computer to change the fuel injector pulse width, thus, to perform in a "closed loop" system that increases catalytic converter conversion rate. The Chrysler Crossfire compatible Oxygen Sensor normally uses Zirconia technology; the two formats are NBOS and WBOS. Narrow-band sensors give signals in a narrow band between rich and lean while the wide-band sensors cover a wider band for precise control of air-fuel ratio. This flexibility is instrumental in making the Chrysler Crossfire to operate to the greatest degree possible when it comes to performance, not to mention safety. The Oxygen Sensor must be checked and serviced often for optimum performance because the deterioration can result to high emission levels and poor engine performance. First of all, one must identify the Chrysler Crossfire Oxygen Sensor as a unique product on the automotive market, since it is quite sturdy, and is an indispensable component for the proper functioning of any car. The highly technological yet extremely reliable Chrysler Crossfire Oxygen Sensor, therefore, plays the role it is supposed to play as the auto part that every Chrysler Crossfire owner should have if he wants his car to function at its prime while at the same time reducing its negative effects on the environment.

Chrysler Crossfire Oxygen Sensor Parts and Q&A

Oxygen Sensor, Rear Driver Side
5099817AA
Q: How to Service and Install an Oxygen Sensor and Engine Cover on Chrysler Crossfire?
A:
Before servicing the upstream O2 sensor, first put a small amount of anti-seize compound on the threaded portion of the sensor. Place the O2 sensor onto the exhaust and tighten it until you reach 50 Nm (37 ft. lbs.). After that, link the O2 sensor harness connector. Align the clips with the rubber mounts on the engine cover and then press firmly to secure it. Lubricating the rubber mounts a little can make it easier to install the engine cover. After that, join the negative battery cable to the frame.
Oxygen Sensor, Front
5099820AA
Q: How to Maintain the Upstream Oxygen Sensor on Chrysler Crossfire?
A:
The first thing to do in servicing the upstream O2 sensor is to remove the negative battery cable. After that, hold both corners of the cover and carefully pull it upwards to remove it. Then, take out the O2 sensor sensor harness connector and continue with removing the O2 sensor itself (1). The left side sensor is represented and the right is much the same as well.