How to Remove and Install the Intake Manifold Temperature Sensor in a 3.2L Engine on Chrysler Crossfire?

This 3.2L engine does not allow you to replace the IMT Sensor apart from the MAF Sensor in the OBD-II system. Before removing the IMT Sensor, unplug the negative cable from the battery and pull up on both corners of the engine cover. After that, take out the upper air cleaner housing, cut apart the IMT Sensor harness connector and remove the IMT Sensor. When installing, fit the IMT Sensor first and attach the harness connector afterwards. Set the upper air cleaner housing and the engine cover into place, ensuring the retaining clips go over the rubber mounts and then push and hold it until it clicks into place. Before reconnecting the negative battery cable, apply a little lubricant to the rubber mounts which will make it easier for the engine cover to fit.

OEM Chrysler Crossfire Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Manifold Temperature Sensor found

View related parts
Chrysler Crossfire Air Intake Temperature Sensor Part Number: 5149209AA
$49.69 MSRP: $109.00
You Save: $59.31 (55%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Charge Air Temperature; Turbocharger Boost; Intake Air Temperature.; Sending Unit; Sensor Charge Air Temperature
- Replaces: 4862635AA, 5080343AA, 5174042AC, 5174042AB, 5174042AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler Crossfire | SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

Chrysler Crossfire Intake Manifold Temperature Sensor

Choose OEM Intake Manifold Temperature Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Intake Manifold Temperature Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Crossfire Intake Manifold Temperature Sensor Parts and Q&A

Air Intake Temperature Sensor
5149209AA
Q: How to Remove and Install the Intake Manifold Temperature Sensor in a 3.2L Engine on Chrysler Crossfire?
A:
This 3.2L engine does not allow you to replace the IMT Sensor apart from the MAF Sensor in the OBD-II system. Before removing the IMT Sensor, unplug the negative cable from the battery and pull up on both corners of the engine cover. After that, take out the upper air cleaner housing, cut apart the IMT Sensor harness connector and remove the IMT Sensor. When installing, fit the IMT Sensor first and attach the harness connector afterwards. Set the upper air cleaner housing and the engine cover into place, ensuring the retaining clips go over the rubber mounts and then push and hold it until it clicks into place. Before reconnecting the negative battery cable, apply a little lubricant to the rubber mounts which will make it easier for the engine cover to fit.