How to Service and Repair a Track Bar on Chrysler Crossfire?

You should raise and support the car and afterward, remove the wheel and tire assembly for any repair of the track bar. After that, remove the inner track bar bolt at the rear axle carrier and the outer track bar bolt connecting to the wheel carrier. Strike the track bar lightly with a plastic hammer to increase the space between the mountings and the flanges. Once removed, lift the track bar from the vehicle. While installing, guarantee the vehicle sits at a typical ride height and react the components to the correct torque after setting the track bar into place. Place the outer track bar bolt inside the wheel carrier and then bolt the inner track bar onto the rear axle carrier. Position the wheel and tire assembly, let the vehicle drop on the ground and make sure the outer track bar bolt is tightened to 70 Nm (52 ft. lbs.) and the inner track bar bolt is tightened to 70 Nm (52 ft. lbs.). In addition, have the vehicle alignment inspected.

OEM Chrysler Crossfire Track Bar

Axle Track Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Track Bar found

View related parts
Chrysler Crossfire Track Bar, Rear Part Number: 5134572AA
$13.81 MSRP: $17.50
You Save: $3.69 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear; Suspension Track Bar, Rear; Track Bar Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

Chrysler Crossfire Track Bar

Choose OEM Track Bar that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Track Bar follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Crossfire Track Bar is an important and highly effective addition for the Chrysler Crossfire brand of vehicles. Complementing the Track Bar's durability, is this Track Bar Assy, used to drawn link the axle to the frame of the vehicle, a factor influential in movement stability or lack of it, particularly notable in sideways sway. Meant to operate in a similar manner as a Panhard rod, the Track Bar permits vertical wheel movement while at the same time limiting lateral movement; this is an advantage especially for the Chrysler Crossfire's coil spring suspension setup. Besides enhancing the handling abilities of a car it positively impacts on the safety and operation of the car. Chrysler Crossfire Track Bar can be effectively installed on different Crossfire models, so that vehicle stability is improved no matter what track bar configuration is chosen. In terms of structure, the Track Bar is very robust, it is built tough to enable it perform well in different roads conditions. This reliability is important for drivers that are interested in a sports car because it makes the Chrysler Crossfire capable to handle tough terrains. Even though the Chrysler Crossfire went into production in 2008, the Track Bar represents the essence of the model - a combination of high-tech solutions and the spirit of motor racing tradition. Therefore, Chrysler Crossfire Track Bar should be a must-have for all car lovers who consider speed, stability, and durability among the principal concerns in car usage.

Chrysler Crossfire Track Bar Parts and Q&A

Track Bar, Rear
5134572AA
Q: How to Service and Repair a Track Bar on Chrysler Crossfire?
A:
You should raise and support the car and afterward, remove the wheel and tire assembly for any repair of the track bar. After that, remove the inner track bar bolt at the rear axle carrier and the outer track bar bolt connecting to the wheel carrier. Strike the track bar lightly with a plastic hammer to increase the space between the mountings and the flanges. Once removed, lift the track bar from the vehicle. While installing, guarantee the vehicle sits at a typical ride height and react the components to the correct torque after setting the track bar into place. Place the outer track bar bolt inside the wheel carrier and then bolt the inner track bar onto the rear axle carrier. Position the wheel and tire assembly, let the vehicle drop on the ground and make sure the outer track bar bolt is tightened to 70 Nm (52 ft. lbs.) and the inner track bar bolt is tightened to 70 Nm (52 ft. lbs.). In addition, have the vehicle alignment inspected.