How to Safely Remove a Front Shock Absorber on Chrysler Crossfire?

Be sure to put the vehicle on its wheels before you start removing the front shock absorber. Take out the shock absorber upper mounting nut (1) first and then remove the washer and rubber mounts. After that, raise the vehicle and get rid of the nut and bolt (1) from the lower control arm. Lift the shock out of the vehicle at the bottom to complete what you're doing. Once finished, make sure none of the mounting parts are damaged or cracked.

How to Install a Shock Absorber on the Rear on Chrysler Crossfire?

First, connect the shock absorber to the lower control arm and fasten it there by tightening the bolt and nut to 55 Nm (41 ft. lbs.). After that, assemble the lower control arm plastic cover and bolt it in place. Set the top of the shock so it is even with the hole in the frame as you slowly lower the vehicle. Now, place the top shock absorber mounting hardware and tighten it to a setpoint of 13 ft. lbs.

OEM Chrysler Crossfire Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Shock Absorbers found

View related parts
Chrysler Crossfire Shock Absorber, Front Part Number: 5142011AA
$54.43 MSRP: $69.00
You Save: $14.57 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Front; Suspension Shock Absorber; Shock; Shock Absorber Suspension Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler Crossfire | SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Shock Absorber, Rear Part Number: 5161528AB
$153.05 MSRP: $194.02
You Save: $40.97 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Crossfire | SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Shock Absorber, Rear Part Number: 5174007AA
$194.08 MSRP: $246.03
You Save: $51.95 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Shock Absorber Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler Crossfire | SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Shock Absorber, Front Part Number: 5135484AA
$197.24 MSRP: $250.03
You Save: $52.79 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut - Suspension; Shock Absorber, Front; Suspension Shock Absorber; Shock; Shock Absorber Suspension Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler Crossfire | SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Shock Absorber, Front Part Number: 68029783AA
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Front; Suspension Shock Absorber; Shock; Shock Absorber Suspension Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler Crossfire | Base, Limited | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Shock Absorber Part Number: 5127493AA
Product Specifications
- Other Name: Absorber Package - Shock Absorber; Shock Assembly; Repair Kit Shock Absorber
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Spring Insulator, Front Lower Part Number: 5101369AA
Product Specifications
- Other Name: Grommet - Shock Absorber; Shock Mount Insulator, Front Lower, Rear Lower; Coil Spring Insulator; Shock Lower Insulator; Bumper; Grommet Shock Absorber
- Position: Front Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Shock Upper Insulator, Front Part Number: 5101368AA
Product Specifications
- Other Name: Grommet - Shock Absorber; Shock Mount Insulator, Front Upper, Rear Upper; Support; Bumper; Grommet Shock Absorber
- Position: Front Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Top Cap, Front Part Number: 5101244AA
Product Specifications
- Other Name: Cover - Shock Absorber; Suspension Strut Mount Cap, Front; Shock Mount Cap; Cap Shock Absorber
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Shock Washer, Front Part Number: 5099735AA
Product Specifications
- Other Name: Retainer - Shock Absorber; Shock Mount Washer, Front, Rear; Bumper Washer; Washer Shock Absorber
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Shock Absorber, Front Part Number: 68029784AA
Product Specifications
- Other Name: Strut - Suspension; Shock Absorber, Front; Suspension Shock Absorber; Shock; Shock Absorber Suspension Front
- Position: Front
- Replaces: 5096749AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Shock Absorber, Rear Part Number: 68029786AA
Product Specifications
- Other Name: Strut - Suspension; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Replaces: 5096751AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Shock Absorber, Rear Part Number: 68029785AA
Product Specifications
- Other Name: Shock - Suspension; Shock Absorber, Rear; Suspension Shock Absorber; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Replaces: 5104993AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler Crossfire | Base, Limited | 3.2L V6, 6 Cyl 3.2 L GAS

Chrysler Crossfire Shock Absorber

Choose OEM Shock Absorber that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Shock Absorber follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Basically, this is a part of what we know as the Chrysler Crossfire Shock Absorber; an important part of the Chrysler Crossfire which has been known to be very dependable most especially when it comes to the suspension system. Meant for dissipating shock impulses, this shock absorber greatly improves the ride and the vehicle's stability, especially on a bumpy surface. Chrysler crossfire shock absorbers incorporates both twin-tube type of shock absorbers and also the mono-tube type of shock absorbers. Twin-tube shocks are quite easy to build and very stiff as compared to mono-tube shocks and they are very good for multi-axis installations. In addition, others like the Position Sensitive Damping (PSD) and Acceleration Sensitive Damping (ASD) fine-tune the package based on the kind of terrain under the Chrysler Crossfire Shock Absorber. Moreover, advanced technologies such as the elector rheological and magnet rheological dampers allow the sophistication in suspenders which increases comfort as well as increasing control. Chrysler Crossfire Shock Absorber is designed to fit Crossfire models and is of extreme importance for higher efficiency of the vehicle and safety. Besides enhancing the comfort of the rider, this feature reduces the amount of unduly bouncing and vibrations affecting the vehicle, and thus stability during Sports mode. This type of shock absorber enhances the performance of Chrysler Crossfire; therefore, it is unique in the automobile market since it reflects the company's brand of engineering prowess and top-notch quality.

Chrysler Crossfire Shock Absorber Parts and Q&A

Shock Absorber
5127493AA
Q: How to Safely Remove a Front Shock Absorber on Chrysler Crossfire?
A:
Be sure to put the vehicle on its wheels before you start removing the front shock absorber. Take out the shock absorber upper mounting nut (1) first and then remove the washer and rubber mounts. After that, raise the vehicle and get rid of the nut and bolt (1) from the lower Control Arm. Lift the shock out of the vehicle at the bottom to complete what you're doing. Once finished, make sure none of the mounting parts are damaged or cracked.
Shock Absorber, Rear
68029785AA
Q: How to Install a Shock Absorber on the Rear on Chrysler Crossfire?
A:
First, connect the shock absorber to the lower Control Arm and fasten it there by tightening the bolt and nut to 55 Nm (41 ft. lbs.). After that, assemble the lower control arm plastic cover and bolt it in place. Set the top of the shock so it is even with the hole in the frame as you slowly lower the vehicle. Now, place the top shock absorber mounting hardware and tighten it to a setpoint of 13 ft. lbs.