How to remove a Sway Bars on Chrysler Crossfire?

The first step is to unbolt and lift away the retainer brackets and bolts from the lower control arms kept by the front sway bar kit. Then, separate the sway bar kit bracket along with the nuts and bolts from the inner retainer brackets. Next, take out the sway bar kit from the car and lastly, pull out all rubber bushings from the bar.

How to Install a Sway Bars on Chrysler Crossfire?

At first, you should insert right and left sway bar bushings (3 and 5) onto the sway bar kit. It is possible that the lower arms must be raised to mount the bushing to its match point. Then, align the sway bar kit with all four brackets (1 and 4), but do not tighten the bolts and nuts yet; be sure the arrows and the word "TOP" on the right are pointing up. Center the sway bar kit in the car and fasten the sway bar bolts to the inner retainer brackets until the torque reaches 20 Nm (15 ft.lbs.). After that, tighten both of the inboard bracket nuts on the sway bar kit (both right and left) to the lower control arm to the set torque specification. Lower the vehicle and inspect your alignment after everything is done.

OEM Chrysler Crossfire Sway Bars

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bars found

View related parts
Chrysler Crossfire Stabilizer Bar, Rear Part Number: 5104992AA
$38.82 MSRP: $49.21
You Save: $10.39 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Rear Sway; Suspension Stabilizer Bar, Rear; Sway Bar; Bar Rear Sway
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Stabilizer Bar, Rear Part Number: 5099081AA
Product Specifications
- Other Name: Bar - Rear Sway; Suspension Stabilizer Bar, Rear; Sway Bar; Bar Rear Sway
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Stabilizer Bar, Front Part Number: 5098980AA
Product Specifications
- Other Name: Bar - Front Sway; Suspension Stabilizer Bar, Front; Sway Bar; Bar Front Sway
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

Chrysler Crossfire Sway Bars

Choose OEM Sway Bars that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Sway Bars follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Crossfire Sway Bars Parts and Q&A

Stabilizer Bar, Front
5098980AA
Q:
How to remove a Sway Bars on Chrysler Crossfire?
A:
The first step is to unbolt and lift away the retainer brackets and bolts from the lower Control Arms kept by the front sway bar kit. Then, separate the sway bar kit bracket along with the nuts and bolts from the inner retainer brackets. Next, take out the sway bar kit from the car and lastly, pull out all rubber bushings from the bar.
Stabilizer Bar, Rear
5104992AA
Q:
How to Install a Sway Bars on Chrysler Crossfire?
A:
At first, you should insert right and left sway bar bushings (3 and 5) onto the sway bar kit. It is possible that the lower arms must be raised to mount the bushing to its match point. Then, align the sway bar kit with all four brackets (1 and 4), but do not tighten the bolts and nuts yet; be sure the arrows and the word "TOP" on the right are pointing up. Center the sway bar kit in the car and fasten the sway bar bolts to the inner retainer brackets until the torque reaches 20 Nm (15 ft.lbs.). After that, tighten both of the inboard bracket nuts on the sway bar kit (both right and left) to the lower Control Arm to the set torque specification. Lower the vehicle and inspect your alignment after everything is done.