How to Replace a CV Boot on Chrysler Pacifica?

The first step is to take out the halfshaft when replacing the Constant Velocity Joint Boot. Afterward, discard the big clamp securing the inside tripod boot to the tripod connection and the small clamp keeping the same boot in place on the interconnecting shaft. Pull off the tripod housing's sealing boot and slide it down the shaft, next take out the joint housing from the spider and shaft. Release the snap-ring that links the spider assembly to the interconnecting shaft, being careful not to touch the outer tripod bearings while you work. If the spider cannot be removed from the shaft by hand, tap it into place with a brass drift. At last, remove the sealing boot from the interconnecting shaft and thoroughly clean and check the spider assembly, tripod joint housing and shaft; if any of these have excessive wear, the halfshaft assembly should be replaced, since its individual parts cannot be repaired.

How to Maintain and Fix a CV Boot on Chrysler Pacifica?

First, take out the halfshaft that needs boot replacement from your car. After, remove the large clamp that holds the CV joint sealing boot to the housing, as well as the small clamp holding the boot on the interconnecting shaft. Loosen the sealing boot from the outer CV joint housing and pull it down the interconnecting shaft. Remove grease from the area so you can see the outer CV joint and interconnecting shaft. Affix the interconnecting shaft in a vise, using caps over the jaws to keep it safe, before gently hammering the CV joint housing to make the exposed circlip slip along the shaft and let the outer CV joint slide away. Put on a brand new circlip for each tooth. Cut off the large circlip first on the interconnecting shaft, then slide off the sealing boot. Afterward, check the entire outer CV joint assembly and the interconnecting joint carefully for any excessive wear; if parts show a lot of wear, you'll need to replace both the halfshaft assembly and the associated halfshaft axle support mounting plate.

OEM Chrysler Pacifica CV Boot

Axle Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 CV Boots found

View related parts
Chrysler Pacifica Boot Kit, Rear Outer Driver Side Part Number: 5014914AA
$27.69 MSRP: $35.11
You Save: $7.42 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot - Half Shaft; CV Joint Boot Kit, Rear Left Outer, Rear Right Outer; Outer Boot; Boots; Boot Kit Half Shaft Outer Left And Right; Boot Kit Half Shaft Outer
- Position: Rear Outer Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2007 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Boot Kit, Front Outer Passenger Side Part Number: 4641181
Product Specifications
- Other Name: Boot - Half Shaft; CV Joint Boot Kit, Front Left Outer, Front Right Outer; CV Boot; Outer Boot; Boot Package, Outer CV; Boot Kit Half Shaft Outer; Boot Package, Inner
- Position: Front Outer Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Boot Kit, Rear Inner Driver Side Part Number: 5103006AA
Product Specifications
- Other Name: Boot Kit - Half Shaft; CV Joint Boot Kit, Rear Left Inner, Rear Right Inner; CV Boot; Inner Boot; Boots; Boot Kit Half Shaft Inner
- Position: Rear Inner Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Boot Kit, Front Inner Passenger Side Part Number: 4797700
Product Specifications
- Other Name: Boot Kit - Half Shaft; CV Joint Boot Kit, Front Left Inner, Front Right Inner; CV Boot; Inner Boot; Boots; Boot Package, Inner CV Right W/ABS; Boot Package, Inner CV Left; Boot Kit Half Shaft Inner
- Position: Front Inner Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Boot Kit Part Number: 68003627AA
Product Specifications
- Other Name: Boot Kit - Half Shaft; CV Boot; Boots; Boot Kit Half Shaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Pacifica | LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Inner Boot, Front Passenger Side Part Number: 5017781AA
Product Specifications
- Other Name: Boot Kit - Half Shaft; CV Joint Boot Kit, Front Right Inner; CV Boot; Boot Kit Half Shaft Inner
- Position: Front Inner Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Outer Boot, Front Passenger Side Part Number: 5161251AA
Product Specifications
- Other Name: Boot - Half Shaft; CV Joint Boot Kit, Front Left Outer, Front Right Outer; CV Boot; Boot Kit Half Shaft Outer
- Position: Front Outer Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Pacifica | Base, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS

Chrysler Pacifica CV Boot

Choose OEM CV Boot that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each CV Boot follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The CV Boot is a crucial model that accentuates the dependability as well as efficiency of the Chrysler Pacifica models. Primarily responsible for shielding the CV joints, CV Boot remains one of the most critical components in power transmission from the transaxle to the wheels. As the CV Boot stores the certain amount of necessary lubricant and does not allow dirt and Interstate to get through, it contributes to the efficiency and safety of the car. This CV Boot will fit almost all Pacifica models, including both the gasoline and plug-in hybrid ones, so Chrysler owners will be able to use it. The Pacifica incorporates other kinds of CV joints including the Rzeppa joint and tripod joints; the CV Boot protects these joints so that the car's movement can be smooth in any type of road. Checking the CV Boot should be done often since any harm to the boot causes CV joint failure, affecting the life of the car. In the automotive market, the CV Boot stands out due to the high constructiveness and design that not only complies with the industry's standards but can also exceed them in some aspects. Such dedication towards quality has culminated to Chrysler Pacifica being received many accolades; for being the premier minivan and the premier family car. Therefore, it can be ascertained that the CV Boot is a firm's testament to its commitment to quality, durability, functionality as well as safety and thus, is a requisite component of the Chrysler Pacifica.

Chrysler Pacifica CV Boot Parts and Q&A

Boot Kit, Rear Inner Driver Side
5103006AA
Q: How to Replace a CV Boot on Chrysler Pacifica?
A:
The first step is to take out the halfshaft when replacing the Constant Velocity Joint Boot. Afterward, discard the big clamp securing the inside tripod boot to the tripod connection and the small clamp keeping the same boot in place on the interconnecting shaft. Pull off the tripod housing's sealing boot and slide it down the shaft, next take out the joint housing from the spider and shaft. Release the snap-ring that links the spider assembly to the interconnecting shaft, being careful not to touch the outer tripod bearings while you work. If the spider cannot be removed from the shaft by hand, tap it into place with a brass drift. At last, remove the sealing boot from the interconnecting shaft and thoroughly clean and check the spider assembly, tripod joint housing and shaft; if any of these have excessive wear, the halfshaft assembly should be replaced, since its individual parts cannot be repaired.
Boot Kit
68003627AA
Q: How to Maintain and Fix a CV Boot on Chrysler Pacifica?
A:
First, take out the halfshaft that needs boot replacement from your car. After, remove the large clamp that holds the CV joint sealing boot to the housing, as well as the small clamp holding the boot on the interconnecting shaft. Loosen the sealing boot from the outer CV joint housing and pull it down the interconnecting shaft. Remove grease from the area so you can see the outer CV joint and interconnecting shaft. Affix the interconnecting shaft in a vise, using caps over the jaws to keep it safe, before gently hammering the CV joint housing to make the exposed circlip slip along the shaft and let the outer CV joint slide away. Put on a brand new circlip for each tooth. Cut off the large circlip first on the interconnecting shaft, then slide off the sealing boot. Afterward, check the entire outer CV joint assembly and the interconnecting joint carefully for any excessive wear; if parts show a lot of wear, you'll need to replace both the halfshaft assembly and the associated halfshaft axle support mounting plate.