How to Remove the Fuel Pump Module on Chrysler Pacifica?

First, drain the gas and take out the fuel tank to ensure that the area around the fuel pump is dormant and does not carry dirt into the fuel system. First use the right cleaner to clean up and then dry the parts with compressed air set at low pressure. Undo the vapor line and electrical cable and then use a brass punch to remove the lock ring from the bottom of the Fuel Pump Module, contacting it only at the right points. Then, remove the top of the fuel pump module and use approved equipment to drain the fuel from the tank into an approved storage tool. Before removing the reservoir, first take out the connector from the passenger side level sensor and then the electrical connector. Find where the return line and fuel supply line will go on the fuel pump module. Pry up the tab of the return line using a small screwdriver, then tip the hose to one side, before repeating this for the fuel line closer to the top of the pump module. Make sure you don't crack or break the locking tabs or the supply line connecting your fridge. After draining the pump with a rag, give the fuel pump module a shake to get the remaining fuel out, then simply remove it.

How to Install a Fuel Pump Module on Chrysler Pacifica?

The fuel pump module goes into the fuel tank first, followed by connecting the siphon and fuel line to the module. You should then place the wire connector on the passenger side level sensor and link the fuel pump electrical connector to the bottom area on top of the module. It's important to make sure the fuel pump module is not twisted, so the fuel level inside the tank is calculated correctly. Fix the top short module rod (4) to the bottom module (3) and the top long module rod (1) to the bottom module (2). Allow the fuel level arm to face the back of the tank. After that, attach the gasket and lock ring for the fuel pump module to the tank so that the seal is in place and use a brass punch to snap in the 1/4 turn lock ring. Join the vapor line and electrical connector and put in the fuel tank. Attach the negative battery cable back, add fuel into the tank and use the scan tool to pump the fuel system, looking for any leaks.

OEM Chrysler Pacifica Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Fuel Pumps found

View related parts
Chrysler Pacifica Fuel Pump, Passenger Side Part Number: 5101805AC
$394.49 MSRP: $601.00
You Save: $206.51 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit; Electric Fuel Pump, Right; Fuel Assembly; Fuel Transfer Unit; Sending Unit; Fuel Pump Assembly; Module Kit Fuel Pump/Level Unit Jet Pump
- Position: Passenger Side
- Replaces: 5101805AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Fuel Gauge Sending Unit Part Number: 52029953AA
$360.68 MSRP: $531.00
You Save: $170.32 (33%)
ADD TO CART
Product Specifications
- Other Name: Package Part - Fuel Pump/Level Unit; Fuel Pump and Sender Assembly; Fuel Pump; Fuel Pump Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Fuel Pump, Driver Side Part Number: 68028056AB
$409.96 MSRP: $624.00
You Save: $214.04 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit; Electric Fuel Pump, Left; Fuel Sending Unit; Assembly.
- Position: Driver Side
- Replaces: 68028056AA, 5101803AB, 5101803AD, 5101803AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Fuel Pump, Driver Side Part Number: 68028057AB
$446.42 MSRP: $679.00
You Save: $232.58 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit; Electric Fuel Pump, Left; Fuel Level Sensor; Fuel Sending Unit.; Fuel Gauge Sending Unit
- Position: Driver Side
- Replaces: 68028057AA, 5101803AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Control Module Part Number: 68434538AA
$110.84 MSRP: $165.00
You Save: $54.16 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Fuel Pump Control; Fuel Pump Driver Module; Fuel Pump Controller; Module Fuel Pump Control
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Fuel Pump Part Number: 68551013AA
$387.01 MSRP: $564.00
You Save: $176.99 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit; Fuel Pump and Sender Assembly; Fuel Pump and Strainer Set; Fuel Sending Unit; Fuel Pump Assembly
- Replaced by: 68551013AB
- Replaces: 68319395AA, 68319395AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus | 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Fuel Pump, Passenger Side Part Number: 5101805AE
$352.50 MSRP: $538.00
You Save: $185.50 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit; Electric Fuel Pump, Right; Fuel Module Assembly; Fuel Level Sensor.; Fuel Gauge Sending Unit; Fuel Pump Assembly; Module Kit Fuel Pump/Level Unit
- Position: Passenger Side
- Replaces: 5101805AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Module Kit Level Unit Part Number: 68319397AA
$48.38 MSRP: $71.90
You Save: $23.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Level Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025, 2017-2018 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Fuel Pump Part Number: 68567295AA
$403.04 MSRP: $592.00
You Save: $188.96 (32%)
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit; Fuel Pump and Sender Assembly; Fuel Pump and Strainer Set; Fuel Sending Unit; Fuel Pump Assembly
- Replaces: 68319970AA, 68319970AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | Hybrid Limited, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)

Chrysler Pacifica Fuel Pump

Choose OEM Fuel Pump that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Fuel Pump follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Fuel Pump is one of those components that are essential in not only specifying the credibility of the Chrysler Pacifica brand but also proving the strength of the Chrysler Pacifica line. Responsible for pumping fuel from the tank to the engine, this fuel pump comes in as a mechanical or an electric fuel pump, the latter being the more popular choice of the models produced nowadays. These electric fuel pumps, which are usually installed and immersed into the fuel tank, work at higher pressures approximately at 40-60 psi, which inclined to provide sufficiently improved delivery system of the highly developed fuel injection system of the Chrysler Pacifica. This evolution not only makes the vehicle efficient but has a factor of safety as the submerged design is useful in cooling the pump also. The Fuel Pump is available with multiple Pacifica models so that the buyers can enjoy the same results as thousands of satisfied auto owners. Other features like pulse width modulation technology intensify longevity and minimize power consumption more than many other automotive products in the market. The Chrysler Pacifica has been recognized as the optimal Minivan of 2016 and the 2020 optimal Family Car implying that the car as a unit and its individual parts including the fuel pump are generally reliable in terms of quality. Thus, the Fuel Pump helps to keep this car reliable, performant, and safe by effectively controlling fuel supply, which in its turn positively impacts the driving experience in every Chrysler Pacifica.

Chrysler Pacifica Fuel Pump Parts and Q&A

Fuel Pump, Driver Side
68028057AB
Q: How to Remove the Fuel Pump Module on Chrysler Pacifica?
A:
First, drain the gas and take out the Fuel Tank to ensure that the area around the fuel pump is dormant and does not carry dirt into the fuel system. First use the right cleaner to clean up and then dry the parts with compressed air set at low pressure. Undo the vapor line and electrical cable and then use a brass punch to remove the lock ring from the bottom of the Fuel Pump Module, contacting it only at the right points. Then, remove the top of the fuel pump module and use approved equipment to drain the fuel from the tank into an approved storage tool. Before removing the reservoir, first take out the connector from the passenger side level sensor and then the electrical connector. Find where the return line and fuel supply line will go on the fuel pump module. Pry up the tab of the return line using a small screwdriver, then tip the hose to one side, before repeating this for the fuel line closer to the top of the pump module. Make sure you don't crack or break the locking tabs or the supply line connecting your fridge. After draining the pump with a rag, give the fuel pump module a shake to get the remaining fuel out, then simply remove it.
Fuel Pump, Passenger Side
5101805AE
Q: How to Install a Fuel Pump Module on Chrysler Pacifica?
A:
The fuel pump module goes into the Fuel Tank first, followed by connecting the siphon and fuel line to the module. You should then place the wire connector on the passenger side level sensor and link the fuel pump electrical connector to the bottom area on top of the module. It's important to make sure the fuel pump module is not twisted, so the fuel level inside the tank is calculated correctly. Fix the top short module rod (4) to the bottom module (3) and the top long module rod (1) to the bottom module (2). Allow the fuel level arm to face the back of the tank. After that, attach the gasket and lock ring for the fuel pump module to the tank so that the seal is in place and use a brass punch to snap in the 1/4 turn lock ring. Join the vapor line and electrical connector and put in the fuel tank. Attach the negative Battery Cable back, add fuel into the tank and use the scan tool to pump the fuel system, looking for any leaks.