How to Install the Lateral Link on Chrysler Pacifica?

Thread the fixation washer onto the cam bolt of the cam, then slide the offset side of the toe link over the same bolt. After that, place and torque the bolt and nut that hold the link to the knuckle. Put in the nut that holds the toe link at the crossmember, but don't tighten it, while you secure the cam bolt with the toe adjustment cam facing upward. Make sure to clip the wheel speed sensor wire to the top of the toe link just over the machined flats. If required, place the rear exhaust on the vehicle and place and tighten the nuts on the wheel and tire assembly to 135 Nm (100 ft. lbs.). Lower the vehicle down and put it on an alignment rack or hoist that you can drive onto, lifting it as you must to reach the mounting bolts. Screw the toe link fasteners to 172 Nm (127 ft. lbs.) at the crossmember and just 108 Nm (80 ft. lbs.) at the knuckle. In the end, complete a wheel alignment.

How to Remove and Replace the Lateral Link on Chrysler Pacifica?

Before removing and replacing the toe link, jack up the vehicle, remove all three wheel mounting nuts and pull the tire and wheel assembly out. In some cases, relocate the rear exhaust to reach the toe link mounting nut fixed to the crossmember. Gently pull the wheel speed sensor cable off the toe link. Make sure not to move the cam bolt head when removing the nut holding the toe link to the crossmember, because the bolt is eccentric for toe adjustment. Clamp the toe adjustment cam bolt from moving and, after that, remove the nut at the crossmember from the toe link, the bolt and corresponding nut at the knuckle, lastly, pull out the link.

OEM Chrysler Pacifica Lateral Link

Lateral Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Lateral Links found

View related parts
Chrysler Pacifica Rear Lateral Arm, Driver Side Part Number: 4743239AB
$232.37 MSRP: $434.00
You Save: $201.63 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Lateral Arm, Rear Left; Suspension Control Arm; Lateral Link; Camber Link; Control Arm; Lateral Arm; Lower Link
- Position: Rear Driver Side
- Replaces: 4743239AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Link Part Number: 68579808AA
$104.75 MSRP: $161.00
You Save: $56.25 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Toe
- Replaces: 68470239AB, 68470239AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Lateral Link Part Number: 68579813AA
$104.20 MSRP: $159.00
You Save: $54.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Link - Toe; Link
- Replaces: 68218020AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Lateral Arm, Rear Passenger Side Part Number: 68469840AA
$123.77 MSRP: $188.00
You Save: $64.23 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Camber; Lateral Arm, Rear Right; Lateral Link
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Lateral Arm, Rear Passenger Side Part Number: 68445336AA
$121.54 MSRP: $184.00
You Save: $62.46 (34%)
ADD TO CART
Product Specifications
- Other Name: Link - Camber; Lateral Arm, Rear, Rear Right; Lateral Link; Upper Link
- Position: Rear Passenger Side
- Replaces: 68235367AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2025 Chrysler Pacifica
- 2017-2022 Chrysler Pacifica | 3.6L V6
View related parts
Chrysler Pacifica Rear Lateral Arm, Passenger Side Part Number: 4743238AB
Product Specifications
- Other Name: Link; Lateral Arm, Rear Right; Suspension Control Arm; Lateral Link; Control Arm; Lateral Arm
- Position: Rear Passenger Side
- Replaces: 4743238AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

Chrysler Pacifica Lateral Link

Choose OEM Lateral Link that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Lateral Link follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Pacifica Lateral Link is one of the critical parts of the Chrysler Pacifica suspension system and well-known for its sturdiness and speed. This component plays a very important role of providing support to rear axle and rear wheels; assists in maintaining proper alignment of wheel hub is imperative for the stability and coordination of the vehicles' side to side movement. Through proper orientation, the Lateral Link greatly contributes to the much-awaited better driving feel than increasing the stability and the compliance of the movement throughout the distinct models of the Pacifica. The Chrysler Pacifica was designed in gasoline or a plug-in hybrid variant; thus, improvements such as the Lateral Link would prove advantageous in the auto industry and boost it as a preferable type. Its application is uniform to various trims; this means that all Pacifica models, starting from the base model to the more styled up versions will benefit from this strong component. The role of the Lateral Link is therefore very significant as it not only enhances the structural support of the vehicle but also contributes to providing a smooth ride for the Chrysler Pacifica that has been highly rated as the "optimal Minivan of 2016", and it was awarded the title of "2020 optimal Family Car." As a result, the Chrysler Pacifica Lateral Link is a perfect reflection of the brand.

Chrysler Pacifica Lateral Link Parts and Q&A

Rear Lateral Arm, Passenger Side
4743238AB
Q: How to Install the Lateral Link on Chrysler Pacifica?
A:
Thread the fixation washer onto the cam bolt of the cam, then slide the offset side of the toe link over the same bolt. After that, place and torque the bolt and nut that hold the link to the knuckle. Put in the nut that holds the toe link at the crossmember, but don't tighten it, while you secure the cam bolt with the toe adjustment cam facing upward. Make sure to clip the wheel speed sensor wire to the top of the toe link just over the machined flats. If required, place the rear exhaust on the vehicle and place and tighten the nuts on the wheel and tire assembly to 135 Nm (100 ft. lbs.). Lower the vehicle down and put it on an alignment rack or hoist that you can drive onto, lifting it as you must to reach the mounting bolts. Screw the toe link fasteners to 172 Nm (127 ft. lbs.) at the crossmember and just 108 Nm (80 ft. lbs.) at the knuckle. In the end, complete a wheel alignment.
Rear Lateral Arm, Driver Side
4743239AB
Q: How to Remove and Replace the Lateral Link on Chrysler Pacifica?
A:
Before removing and replacing the toe link, jack up the vehicle, remove all three wheel mounting nuts and pull the tire and wheel assembly out. In some cases, relocate the rear exhaust to reach the toe link mounting nut fixed to the crossmember. Gently pull the wheel speed sensor cable off the toe link. Make sure not to move the cam bolt head when removing the nut holding the toe link to the crossmember, because the bolt is eccentric for toe adjustment. Clamp the toe adjustment cam bolt from moving and, after that, remove the nut at the crossmember from the toe link, the bolt and corresponding nut at the knuckle, lastly, pull out the link.