How to Remove a TPMS Sensor on Chrysler Pacifica?

After placing the vehicle on a flat surface, take off the wheel and tire, but remember to save the valve stem cap's O-ring seal when removing the tire pressure monitoring system. Always reinstall the nickel-plated brass core in the valve stem when an aluminum one is used, do not use a substitute core. After that, carefully read the instruction manual from the tire changer as you take the tire off the wheel to avoid injuring the wheel sensor. Try not to use the Bead Breaker by the sensor when breaking either front or rear tire bead from the rim. Take the tool with light pressure and push it into the valve stem, at a 10° angle, before pulling the tire away from the upper and lower beads. Finally, get a small wall socket to remove the nut that keeps the sensor attached to the wheel and then pull the sensor off the wheel.

How to Prepare for Reinstalling a TPMS Sensor on Chrysler Pacifica?

Before installing a tire pressure sensor, be sure to replace the sealing grommet at the bottom of the valve stem. Clean the spot where the sensor sealing grommet connects to the wheel so that it doesn't have scratches. Set up the sensor properly on the wheel explained in the guide so as to prevent streaks or scarring. Insert the special sensor nut into the thin wall socket and use a 4 Nm (35 inch lbs.) torque to tighten it. Even a minor 12 Nm (106 inch lbs.) excess torque on the sensor nut can cause the sensor to separate from the valve stem, so it needs to be corrected right away even if all is functioning as it should be. Carefully read and use the tire changer manufacturer's instructions to prevent damaging the tire pressure sensor. When using a rotating wheel tire changer, place the sensor valve stem about 210° from the head clockwise before rotating the wheel and mounting the tire on both the upper and lower beads. Set the sensor valve stem about 210° from the tool changer head and away from the lower bead breaker so it will not be damaged when the breaker rises, then turn the tool counterclockwise to place the tire on the wheel and repeat this process for the tire's upper and lower beads. After that, mount the wheel and tire assembly onto the vehicle.

OEM Chrysler Pacifica TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 TPMS Sensors found

View related parts
Chrysler Pacifica TPMS Sensor Part Number: 68078861AC
$106.43 MSRP: $161.00
You Save: $54.57 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Pressure Sensor; Hardware Kit; Sensor
- Replaces: 68078861AA, 68001696AA, 56053030AB, 68001696AB, 68078861AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica TPMS Sensor Part Number: 68313387AC
$68.02 MSRP: $102.00
You Save: $33.98 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor; Sensor Tire Pressure 20 Inch Wheels Only; Sensor Tire Pressure
- Replaces: 68252493AA, 68313387AA, 68313387AB, 68252493AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2022 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Tire Pressure Sensor Part Number: 68406527AA
$67.79 MSRP: $102.00
You Save: $34.21 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor; Tire Sensor; Pressure Sensor; Sensor
- Replaces: 52088990AD, 52088990AE, 52088990AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Chrysler Pacifica | Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Pacifica TPMS Sensor Part Number: 68443470AB
$29.56 MSRP: $63.45
You Save: $33.89 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Tire Pressure; Tire Pressure Monitoring System Sensor; TPMS Sensor Service Kit; Tire Pressure Sensor
- Replaces: 68443470AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)

Chrysler Pacifica TPMS Sensor

Choose OEM TPMS Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each TPMS Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler vehicles especially Chrysler Pacifica incorporates the TPMS sensor and its importance cannot be underestimated while on the road. This TPMS Sensor is one of the most dependable devices encouraging safe driving through timely notification of any pressure changes of the tire. Chrysler Pacifica comes with Indirect TPMS or Direct TPMS so that relevant solutions may be incorporated for monitoring. The iTPMS is an elaborate system given through software-based estimates for the users and the dTPMS features accurate pressure details given through a hardware component of the vehicle, thus increasing the driving experience. The flexibility of this Chrysler Pacifica TPMS Sensor guarantees that several Pacifica models can be compatible with it and have the system that suits the driver most. However, the TPMS Sensor goes much beyond mere convenience; it is useful in the improvement of fuel economy through right tire pressure that has a positive influence on mileage as well as the durability of the tires. Moreover, the Chrysler Pacifica TPMS Sensor also claims a unique position among its competitors in the auto market because of effectiveness and concentration on customers' safety for families and individuals. Having all of these characteristics and civil standings of a powerful tool, the Chrysler Pacifica TPMS Sensor is representative of the brand's commitment to quality and reliability that has firmly placed it in a leadership position within the minivan class.

Chrysler Pacifica TPMS Sensor Parts and Q&A

TPMS Sensor
68078861AC
Q: How to Remove a TPMS Sensor on Chrysler Pacifica?
A:
After placing the vehicle on a flat surface, take off the wheel and tire, but remember to save the valve stem cap's O-ring seal when removing the tire pressure monitoring system. Always reinstall the nickel-plated brass core in the valve stem when an aluminum one is used, do not use a substitute core. After that, carefully read the instruction manual from the tire changer as you take the tire off the wheel to avoid injuring the wheel sensor. Try not to use the Bead Breaker by the sensor when breaking either front or rear tire bead from the rim. Take the tool with light pressure and push it into the valve stem, at a 10° angle, before pulling the tire away from the upper and lower beads. Finally, get a small wall socket to remove the nut that keeps the sensor attached to the wheel and then pull the sensor off the wheel.
Tire Pressure Sensor
68406527AA
Q: How to Prepare for Reinstalling a TPMS Sensor on Chrysler Pacifica?
A:
Before installing a tire pressure sensor, be sure to replace the sealing grommet at the bottom of the valve stem. Clean the spot where the sensor sealing grommet connects to the wheel so that it doesn't have scratches. Set up the sensor properly on the wheel explained in the guide so as to prevent streaks or scarring. Insert the special sensor nut into the thin wall socket and use a 4 Nm (35 inch lbs.) torque to tighten it. Even a minor 12 Nm (106 inch lbs.) excess torque on the sensor nut can cause the sensor to separate from the valve stem, so it needs to be corrected right away even if all is functioning as it should be. Carefully read and use the tire changer manufacturer's instructions to prevent damaging the tire pressure sensor. When using a rotating wheel tire changer, place the sensor valve stem about 210° from the head clockwise before rotating the wheel and mounting the tire on both the upper and lower beads. Set the sensor valve stem about 210° from the tool changer head and away from the lower bead breaker so it will not be damaged when the breaker rises, then turn the tool counterclockwise to place the tire on the wheel and repeat this process for the tire's upper and lower beads. After that, mount the wheel and tire assembly onto the vehicle.