How to Service and Repair a Door Lock Switch on Chrysler Prowler?

Make sure to disconnect and isolate the battery's negative wire before handling the door lock switch. Take out the door trim panel and water shield and once that's done, close the door window. Remove the wire connector from the door lock switch, bringing the door harness out of contact with this switch and also unattach the wiring clips from the door impact beam. Now, take out the main handle on your door, then detach the lock tab holding the switch to the back of the lock cylinder before taking out the switch. For setting up, attach the switch into the lock cylinder and next fit the outer door handle. Link the connector of the harness to the switch and bring the harness wire to the retainer inside the inner door impact beam. At last, put in the door water shield and the trim panel and secure the battery negative cable again.

OEM Chrysler Prowler Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Door Lock Switch found

View related parts
Chrysler Prowler Lock Switch Part Number: 4607071
Product Specifications
- Other Name: Switch - Deck Lid Release; Trunk Lid Release Switch; Door Lock Switch; Switch, Trunk (Deck Lid Release); Switch Deck Lid Release
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Prowler | Base | 6 Cyl 3.5 L GAS

Chrysler Prowler Door Lock Switch

Choose OEM Door Lock Switch that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Door Lock Switch follows strict manufacturing steps to lock in quality and fit. If your Chrysler Prowler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Prowler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Prowler Door Lock Switch is a significant electrical part that serves a vital function of the security and systematic access of Chrysler Prowler automobiles. This Door Lock Switch is considered one of the best due to its dependable and quality performance; it is installed on the driver's side panel to unlock/lock all doors within the vehicle using just one switch. This feature is useful in the prevention of access by unauthorized people, thus greatly enhancing the security of vehicles. The several styles of the Chrysler Prowler models, which this Door Lock Switch is a part of, are often fitted with sophisticated keyless entry and start methods that allow the drivers to lock and unlock their automobiles using remotes or keypad controls. Also present is the door locks which automatically locks the doors when the car is in motion to eliminate incidences of doors opening when the vehicle is on the move. The Door Lock Switch is designed using solenoids or reversible electric motor to illustrate Chrysler's ingenuity in engineering. Due to this it facilitates its integration with different models of Prowler and in the automotive market it offers efficiency as well as ease in usage of the Door Lock Switch. Such features when incorporated do not only enhance the drive but also maintain the Chrysler Prowler as a stylish and safe car. However, Chrysler Prowler Door Lock Switch is a worthy component necessary for proper functioning of the Prowler to make it desired by automobile lovers.

Chrysler Prowler Door Lock Switch Parts and Q&A

Lock Switch
4607071
Q: How to Service and Repair a Door Lock Switch on Chrysler Prowler?
A:
Make sure to disconnect and isolate the battery's negative wire before handling the door lock switch. Take out the door trim panel and water shield and once that's done, close the door window. Remove the wire connector from the door lock switch, bringing the door harness out of contact with this switch and also unattach the wiring clips from the door impact beam. Now, take out the main handle on your door, then detach the lock tab holding the switch to the back of the lock cylinder before taking out the switch. For setting up, attach the switch into the lock cylinder and next fit the outer Door Handle. Link the connector of the harness to the switch and bring the harness wire to the retainer inside the inner door impact beam. At last, put in the door water shield and the trim panel and secure the battery negative cable again.