Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM Chrysler Prowler Windshield Washer Fluid Reservoir

Windshield Washer Reservoir
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Windshield Washer Fluid Reservoir found

  • Chrysler Prowler Windshield Washer Fluid Reservoir - 4815766
    Chrysler Prowler Windshield Washer Fluid Reservoir Diagram - 4815766
    View related parts

    Chrysler Prowler Reservoir Part Number: 4815766

    Product Specifications
    • Other Name: Reservoir - Washer; Reservoir Washer
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2001-2002 Chrysler Prowler | Base | 6 Cyl 3.5 L GAS

Chrysler Prowler Windshield Washer Fluid Reservoir

Choose OEM Windshield Washer Fluid Reservoir that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Windshield Washer Fluid Reservoir follows strict manufacturing steps to lock in quality and fit. If your Chrysler Prowler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Prowler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Prowler Windshield Washer Fluid Reservoir Parts and Q&A

  • Chrysler Prowler Windshield Washer Fluid Reservoir - 4815766 Reservoir Reservoir
    4815766
    Q:
    How to Maintain a Windshield Washer Fluid Reservoir on Chrysler Prowler?
    A:
    Open the hood and disconnect the battery's negative cable to start servicing the windshield washer reservoir. Take off both Wiper Arms and the cowl trim cover too. Once that is done, take out the nut holding the MTV and purge solenoid assembly bracket so you can reach the reservoir retaining screw. With the reservoir removal screws out, move the reservoir up and remove it. Remove the wire connector from the reservoir pump and float sensor and then stop the hose and seal the liquid outlet so it cannot leak. Take out the reservoir. At installation, attach the hose to the pump and connect the wires. Set the reservoir and fit the retaining screws which should be tightened to 4.5 Nm (40 in. lbs.) torque. After that, reposition the cowl trim cover and place both wiper arms back in their slots and then connect the battery negative cable.

Related Chrysler Prowler Parts

Browse Chrysler Prowler Windshield Washer Fluid Reservoir by Years

+
2002 2001