How to Install a Crankshaft Seal on Chrysler PT Cruiser?

First, use 400 grit sandpaper to remove any damaging marks or burrs from the crankshaft edge before inserting the Crankshaft Main Bearing Seal. Ordinary lubrication is not required when the seal is being fitted. Fit Rear Crankshaft Seal Guide 6926-1 onto the crankshaft and lay the seal over the tool, so the lip faces the crankcase. Make sure you don't push past flush when driving the seal into the block, as it may result in an oil leak. Combo the Rear Crankshaft Seal Installer 6926-2 with the Driver Handle C-4171 to drive the seal fully into the block. After the seal has been fitted, use Mopar(R) Lock & Seal Adhesive and carefully tighten the bolts to 95 Nm (70 ft. lbs.), before installing the transaxle.

OEM Chrysler PT Cruiser Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Seal found

View related parts
Chrysler PT Cruiser Rear Main Seal Part Number: 4621939AB
$27.24 MSRP: $40.20
You Save: $12.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Seal; Seal Rear Main Crankshaft Serviced With Retainer [04663625]; Crankshaft Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

Chrysler PT Cruiser Crankshaft Seal

Choose OEM Crankshaft Seal that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Crankshaft Seal follows strict manufacturing steps to lock in quality and fit. If your Chrysler PT Cruiser matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine PT Cruiser parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Crankshaft Seal used in Chrysler PT Cruiser cars is an important one which is placed at the front of an engine. Assembled usually from metal and rubber, this round seal is very important to keep the crankcase from releasing the engine oil in order to lubricate some of the most important components of the engine. Crankshaft Seal is another Chrysler PT Cruiser part that could either be worn or damaged and results to oil leaks especially the high mileage models. Any Signs of failure of Crankshaft Seal should not be ignored since it needs to be replaced to get optimum performance of the car and prevent further damage of the engine. In general, the Crankshaft Seal can be regarded as one of the most important and, at the same time, the least complicated part of the Chrysler PT Cruiser engine that plays a crucial role in the car's steady performance.

Chrysler PT Cruiser Crankshaft Seal Parts and Q&A

Rear Main Seal
4621939AB
Q: How to Install a Crankshaft Seal on Chrysler PT Cruiser?
A:
First, use 400 grit sandpaper to remove any damaging marks or burrs from the Crankshaft edge before inserting the Crankshaft Main Bearing Seal. Ordinary lubrication is not required when the seal is being fitted. Fit Rear Crankshaft Seal Guide 6926-1 onto the crankshaft and lay the seal over the tool, so the lip faces the crankcase. Make sure you don't push past flush when driving the seal into the block, as it may result in an oil leak. Combo the Rear Crankshaft Seal Installer 6926-2 with the Driver Handle C-4171 to drive the seal fully into the block. After the seal has been fitted, use Mopar(R) Lock & Seal Adhesive and carefully tighten the bolts to 95 Nm (70 ft. lbs.), before installing the transaxle.