How to Install a Door Lock Cylinder on a Coupe on Chrysler PT Cruiser?

Put the lock cylinder and gasket behind the outer part of the door panel to begin installing on a coupe. The cylinder retainer has to be fitted to the door after that and the lock rod from the latch has to be attached. If the vehicle has wiring connectors, engage them and finish by putting in the door trim panel and the water dam.

How to Service and Repair a Door Lock Cylinder on Chrysler PT Cruiser?

To repair your front door lock cylinder, first take out the door water dam and trim panel and then raise the door glass. Release the door lock rod from its connection with the latch and take out the wiring from the lock cylinder if the car comes with it. Get rid of the fasteners on the door and lift out the lock cylinder retainer before removing the lock cylinder from the doorknob. Place the cylinder and gasket into the vertical panel of the door, fit the retainer to the door, reconnect the rod from the latch, connect the wiring leads if needed and then slide the door trim back over the locks.

OEM Chrysler PT Cruiser Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Lock Cylinders found

View related parts
Chrysler PT Cruiser Lock Cylinder, Front Part Number: 68001713AA
$71.89 MSRP: $107.00
You Save: $35.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Door Lock; Door Lock Cylinder, Front; Trunk Lock Cylinder; Cylinder & Keys; Cylinder Door Lock for Doors and Tailgate.
- Position: Front
- Replaces: 4864651
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Lock Cylinder, Rear Part Number: 5016732AC
$49.12 MSRP: $77.85
You Save: $28.73 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Lock - Deck Lid Lock; Liftgate Lock, Rear; Trunk Lock Cylinder; Door Lock Cylinder
- Position: Rear
- Replaces: 5016732AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler PT Cruiser | Base, Dream, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

Chrysler PT Cruiser Door Lock Cylinder

Choose OEM Door Lock Cylinder that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Door Lock Cylinder follows strict manufacturing steps to lock in quality and fit. If your Chrysler PT Cruiser matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine PT Cruiser parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Door Lock Cylinder in Chrysler PT Cruiser is a critical part of the car which is installed in the front doors and is used for locking and unlocking of its doors using car key. This mechanism plays a crucial role in the protection of the vehicles as well as access to the cabin of the car. In the course of time, due to constant use, the Chrysler PT Cruiser Door Lock Cylinder can wears out hence creating problems such as a key that does not rotate or one that gets stuck. A majority of today's automobile models have adopted advanced lock mechanisms than the door lock cylinders but the Chrysler PT Cruiser has not done so. In particular, it's important to know that sometimes it is necessary to change the Door Lock Cylinder which is located inside the car and maintain it regularly to guarantee the car's safety. Awareness of these indicators will enable the early detection of various future problems associated with the Chrysler PT Cruiser's locking system.

Chrysler PT Cruiser Door Lock Cylinder Parts and Q&A

Lock Cylinder, Front
68001713AA
Q: How to Install a Door Lock Cylinder on a Coupe on Chrysler PT Cruiser?
A:
Put the lock cylinder and gasket behind the outer part of the door panel to begin installing on a coupe. The cylinder retainer has to be fitted to the door after that and the lock rod from the latch has to be attached. If the vehicle has wiring connectors, engage them and finish by putting in the door trim panel and the water dam.
Lock Cylinder, Rear
5016732AC
Q: How to Service and Repair a Door Lock Cylinder on Chrysler PT Cruiser?
A:
To repair your front door lock cylinder, first take out the door water dam and trim panel and then raise the door glass. Release the door lock rod from its connection with the latch and take out the wiring from the lock cylinder if the car comes with it. Get rid of the fasteners on the door and lift out the lock cylinder retainer before removing the lock cylinder from the doorknob. Place the cylinder and gasket into the vertical panel of the door, fit the retainer to the door, reconnect the rod from the latch, connect the wiring leads if needed and then slide the door trim back over the locks.