How to Remove the Windshield Washer Fluid Reservoir on Chrysler PT Cruiser?

Open the hood and remove the negative battery cable before getting rid of the windshield washer reservoir. To do this, lift up the wiper arm nut cap with a trim stick (#C-4755) or an equivalent tool and then unscrew and take the wiper arm retaining nut off. While positioned outside the center, wiggle the arm around in its pivot until it removes. After that, remove the right cowl cover which is above the left cover, by removing the rear seal at the cowl and the four push retainers attached to it. After the first step, take out all three reservoir retaining screws, separate the pump cable and remove the connections from the washer hose. Remove the reservoir from inside the cowl and let it drain into a bucket below. Move the washer pump into the new reservoir, as it will be supplied with a grommet for the pump. After that, take out the plastic strap around the pump and gently pull the pump out of the reservoir by the grommet.

OEM Chrysler PT Cruiser Windshield Washer Fluid Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Windshield Washer Fluid Reservoir found

View related parts
Chrysler PT Cruiser Washer Reservoir Part Number: 5018059AB
Product Specifications
- Other Name: Reservoir - Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir; Reservoir Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

Chrysler PT Cruiser Windshield Washer Fluid Reservoir

Choose OEM Windshield Washer Fluid Reservoir that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Windshield Washer Fluid Reservoir follows strict manufacturing steps to lock in quality and fit. If your Chrysler PT Cruiser matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine PT Cruiser parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler PT Cruiser Windshield Washer Fluid Reservoir Parts and Q&A

Washer Reservoir
5018059AB
Q:
How to Remove the Windshield Washer Fluid Reservoir on Chrysler PT Cruiser?
A:
Open the hood and remove the negative Battery Cable before getting rid of the windshield washer reservoir. To do this, lift up the Wiper Arm nut cap with a trim stick (#C-4755) or an equivalent tool and then unscrew and take the wiper arm retaining nut off. While positioned outside the center, wiggle the arm around in its pivot until it removes. After that, remove the right cowl cover which is above the left cover, by removing the rear seal at the cowl and the four push retainers attached to it. After the first step, take out all three reservoir retaining screws, separate the pump cable and remove the connections from the washer hose. Remove the reservoir from inside the cowl and let it drain into a bucket below. Move the washer pump into the new reservoir, as it will be supplied with a grommet for the pump. After that, take out the plastic strap around the pump and gently pull the pump out of the reservoir by the grommet.