How to service and repair a Rear Door Striker on Chrysler Sebring?

Tape off the area around the door latch striker on the C-pillar. The next part is to take out the bolts holding the door latch striker onto the C-pillar and remove the striker from the car. Any shims placed between the door latch striker and the C-pillar need to be reset with the updated door latch striker.

How to install a rear door striker on Chrysler Sebring?

Before you install the rear door striker, check for shims between the latch striker and the C-pillar and reinstall them if they're missing, because they are needed for the door to function properly. With the latch striker and any shims on the vehicle, put in the screws that connect the latch striker to the C-pillar just to hold them. Examine the connection at the C-pillar and bolt together the latch striker until the marks meet. Tighten these bolts to 20 Nm (14.8 ft. lbs.). Check how the door opener fits and functions and make required adjustments to the door latch striker.

OEM Chrysler Sebring Rear Door Striker

Rear Door Latch Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Rear Door Strikers found

View related parts
Chrysler Sebring Striker Spacer, Rear Center Part Number: 4589050AB
$27.59 MSRP: $40.40
You Save: $12.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker - Door Latch; Door Lock Striker Plates and Pins, Front, Rear, Center.; Striker; Striker Door Latch
- Position: Rear Center
- Replaces: 4589050AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Striker, Rear Part Number: 4780259AD
$23.89 MSRP: $35.15
You Save: $11.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker - Door Latch; Door Lock Striker Plates and Pins, Front and Rear.; Striker Door Latch
- Position: Rear
- Replaces: 4780259
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler Sebring | JX, JXi | 2.4L L4, 2.5L V6, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Striker, Rear Part Number: 4589653AB
$27.59 MSRP: $40.40
You Save: $12.81 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker - Decklid Latch; Deck Lid Striker, Rear; Striker Decklid Latch
- Position: Rear
- Replaces: 4589653AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Striker, Front Part Number: 4520288
Product Specifications
- Other Name: Striker - Door Latch; Door Lock Striker Plate, Front; Striker Assembly, Door Latch; Front, Rear, and Door Strikers; Latch options available.
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Striker, Front Part Number: 4878826AC
Product Specifications
- Other Name: Striker - Door; Liftgate Lock Striker Plate, Rear; Front & Rear Door Lock Striker Plates; Rear Tailgate Striker Plate; Striker Door
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Striker Part Number: MB197499
Product Specifications
- Other Name: Striker - Door Latch; Striker, Trunk Lid Latch; Striker Door Latch; Striker, Lid Latch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Striker, Front Part Number: MB867059
Product Specifications
- Other Name: Striker - Door; Door Lock Striker Plate, Front; Door Lock Striker Pin, Front; Striker, Front Door Latch; Striker Door
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS

Chrysler Sebring Rear Door Striker

Choose OEM Rear Door Striker that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Rear Door Striker follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Rear Door Striker Parts and Q&A

Striker, Rear
4589653AB
Q: How to service and repair a Rear Door Striker on Chrysler Sebring?
A:
Tape off the area around the door latch striker on the C-pillar. The next part is to take out the bolts holding the door latch striker onto the C-pillar and remove the striker from the car. Any shims placed between the door latch striker and the C-pillar need to be reset with the updated door latch striker.
Striker Spacer, Rear Center
4589050AB
Q: How to install a rear door striker on Chrysler Sebring?
A:
Before you install the rear door striker, check for shims between the latch striker and the C-pillar and reinstall them if they're missing, because they are needed for the door to function properly. With the latch striker and any shims on the vehicle, put in the screws that connect the latch striker to the C-pillar just to hold them. Examine the connection at the C-pillar and bolt together the latch striker until the marks meet. Tighten these bolts to 20 Nm (14.8 ft. lbs.). Check how the door opener fits and functions and make required adjustments to the door latch striker.