How to Service and Repair a Radiator Support on Chrysler Sebring?

The first step to servicing the radiator support cross-member is opening the hood by releasing the hood latch. After that, take out the fasteners that join the fascia/grille to the radiator support crossmember and then the bolts on the braces connecting to the bottom of the crossmember. After that, remove the bolts between the crossmember and radiator closure panel and the nuts that hold the hood latch to the radiator support crossmember. When the other components are done, grab the radiator support crossmember from the car next. To fix the support crossmember back in place, line it up correctly and drive in the nuts for the hood latch. After that, install the bolts holding the crossmember to the radiator closure panel and attach the braces to the bottom of the crossmember. After that, put the push-in fasteners into the sockets on the radiator support crossmember and secure the fascia/grille, then shut the hood.

OEM Chrysler Sebring Radiator Support

Center Radiator Support

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Radiator Supports found

View related parts
Chrysler Sebring Support Brace, Passenger Side Part Number: 68381131AA
$18.04 MSRP: $36.50
You Save: $18.46 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Radiator Crossmember; Radiator Support Panel Reinforcement, Right
- Position: Passenger Side
- Replaces: 5155810AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Radiator Support, Front Part Number: 68378862AA
$392.18 MSRP: $700.00
You Save: $307.82 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Radiator Closure; Radiator Support Panel, Front
- Position: Front
- Replaces: 5116209AE, 5116209AK, 5116209AG, 5116209AD, 5116209AF, 5116209AL, 5116209AH, 5116209AI, 5116209AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Center Brace, Driver Side Part Number: 4814717AA
Product Specifications
- Other Name: Bracket - Radiator Crossmember; Radiator Support Panel Reinforcement, Left; Radiator Support Tie Bar Brace, Left Upper; Upper Tie Bar Brace; Brace Radiator Crossmember
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Center Brace, Passenger Side Part Number: 4814716AA
Product Specifications
- Other Name: Bracket - Radiator Crossmember; Radiator Support Panel Reinforcement, Right; Radiator Support Tie Bar Brace, Right Upper; Upper Tie Bar Brace; Brace Radiator Crossmember
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Upper Tie Bar Brace Part Number: 5256818
Product Specifications
- Other Name: Bracket Crossmember To Fro; Brace, Upper Radiator Crossmember To Front Rail Extension, Right; Brace Crossmember To Front Rail; Brace, Upper Radiator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Support Brace, Driver Side Part Number: 68381135AA
Product Specifications
- Other Name: Bracket - Radiator Crossmember; Radiator Support Panel Reinforcement, Left
- Position: Driver Side
- Replaces: 5155809AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Chrysler Sebring Radiator Support

Choose OEM Radiator Support that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Radiator Support follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Radiator Support Parts and Q&A

Center Brace, Driver Side
4814717AA
Q: How to Service and Repair a Radiator Support on Chrysler Sebring?
A:
The first step to servicing the radiator support cross-member is opening the hood by releasing the Hood Latch. After that, take out the fasteners that join the fascia/grille to the radiator support crossmember and then the bolts on the braces connecting to the bottom of the crossmember. After that, remove the bolts between the crossmember and radiator closure panel and the nuts that hold the hood latch to the radiator support crossmember. When the other components are done, grab the radiator support crossmember from the car next. To fix the support crossmember back in place, line it up correctly and drive in the nuts for the hood latch. After that, install the bolts holding the crossmember to the radiator closure panel and attach the braces to the bottom of the crossmember. After that, put the push-in fasteners into the sockets on the radiator support crossmember and secure the fascia/grille, then shut the hood.