How to remove and install the Shift Linkage Boot on an automatic transmission on Chrysler Sebring?

To begin removing the automatic transmission shift boot, remove the shifter knob by removing its set screw and pulling the knob off. Do not use a trim stick or tool to disconnect the transmission range indicator. After that, remove the indicator bezel for the transmission range. This is done by pinching the sides slightly and lifting it up until the locking tabs are free of the floor console. If the component has one, unplug the electrical connector and remove the shift boot. In order to install the shift boot, position it correctly, and connect the wire connector for the transmission range indicator bezel on the bottom of the bezel. To install the transmission range indicator bezel, press the bezel down onto the upper assembly until the pins align with the hole in console. Reinstall the shifter knob, tightening the set screw to 3 N.m (23 in.lbs.).

OEM Chrysler Sebring Shift Linkage Boot

Shift Linkage Dust Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Shift Linkage Boots found

View related parts
Chrysler Sebring Shift Knob Part Number: 4668229
Product Specifications
- Other Name: Boot - Gearshift; Manual Transmission Shift Knob; Automatic Transmission Selector Handle; Shift Boot; Boot And Knob Gearshift
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006, 1997-2000 Chrysler Sebring | Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Shift Boot Part Number: 4593311
Product Specifications
- Other Name: Boot - Gear Shift Lever; Manual Transmission Shift Linkage Boot; Boot Gear Shift Lever
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

Chrysler Sebring Shift Linkage Boot

Choose OEM Shift Linkage Boot that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Shift Linkage Boot follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Shift Linkage Boot Parts and Q&A

Shift Boot
4593311
Q:
How to remove and install the Shift Linkage Boot on an automatic transmission on Chrysler Sebring?
A:
To begin removing the automatic transmission shift boot, remove the shifter knob by removing its set screw and pulling the knob off. Do not use a trim stick or tool to disconnect the transmission range indicator. After that, remove the indicator bezel for the transmission range. This is done by pinching the sides slightly and lifting it up until the locking tabs are free of the floor console. If the component has one, unplug the electrical connector and remove the shift boot. In order to install the shift boot, position it correctly, and connect the wire connector for the transmission range indicator bezel on the bottom of the bezel. To install the transmission range indicator bezel, press the bezel down onto the upper assembly until the pins align with the hole in console. Reinstall the shifter knob, tightening the set screw to 3 N.m (23 in.lbs.).