How to Detach the Hood Release Cable on Chrysler Town & Country?

You should first remove the upper radiator crossmember to take out the hood cable. After that, take off the support clips from both the crossmember and the body. After that, free the grommet from its place on the cowl panel. After that, unscrew the timer and carefully remove the cable and handle assembly from the cowl panel.

How to Install the Hood Release Cable for Latch Release on Chrysler Town & Country?

First, lay the hood cable under the instrument panel to install it. Set the latch end of the cable on the mechanic's wire from the dash panel, then push the cable toward the latch along the engine compartment, using the mechanical wire. After disconnecting the mechanic's wire at the cable, slot the rubber grommet cable insulator into the dash panel's opening. Set the hood release handle into the instrument panel and organize the cable so its arm rests on the latch. Push the cable case sideways into the hood latch keyhole and secure it with the cable cover into the hood latch lock. Afterward, connect the hood latch and attach the attaching clips on the cable case into the original holes in the strut tower, fender, headlamp area and radiator closure panel crossmember.

OEM Chrysler Town & Country Hood Release Cable

Hood Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Hood Release Cables found

View related parts
Chrysler Town & Country Release Cable Part Number: 68067136AC
$64.06 MSRP: $95.75
You Save: $31.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Release - Hood Latch; Hood Release Cable; Release Hood Latch
- Replaces: 68067136AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | Limited, Limited Platinum, LX, S, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Release Cable, Front Part Number: 5109272AC
$64.06 MSRP: $95.75
You Save: $31.69 (34%)
ADD TO CART
Product Specifications
- Other Name: Release - Hood Latch; Hood Release Cable, Front; Hood Release Cable
- Position: Front
- Replaces: 5109272AB, 5109272AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, LX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Release Cable, Front Part Number: 4717517AD
$72.25 MSRP: $109.00
You Save: $36.75 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Hood Latch; Hood Release Cable, Front; Hood Release Cable
- Position: Front
- Replaces: 4717517AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chrysler Town & Country | Base, EL, EX, Limited, LX, LXi, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Release Cable Part Number: 4673097
Product Specifications
- Other Name: Release Assembly - Inside Hood Latch; Hood Release Cable; Release Assembly, Inside Hood Latch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Release Cable Part Number: 4534670
Product Specifications
- Other Name: Release - Assembly - Inside Hood Latch Release; Hood Release Cable; Release Assembly, Inside Hood Latch; Handle, Hood Latch Release W/Cable; Handle, Hood Release Latch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987 Chrysler Town & Country | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS

Chrysler Town & Country Hood Release Cable

Choose OEM Hood Release Cable that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Hood Release Cable follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Town & Country Hood Release Cable Parts and Q&A

Release Cable, Front
5109272AC
Q:
How to Detach the Hood Release Cable on Chrysler Town & Country?
A:
You should first remove the upper radiator crossmember to take out the hood cable. After that, take off the support clips from both the crossmember and the body. After that, free the grommet from its place on the cowl panel. After that, unscrew the timer and carefully remove the cable and handle assembly from the cowl panel.
Release Cable, Front
4717517AD
Q:
How to Install the Hood Release Cable for Latch Release on Chrysler Town & Country?
A:
First, lay the hood cable under the instrument panel to install it. Set the latch end of the cable on the mechanic's wire from the dash panel, then push the cable toward the latch along the engine compartment, using the mechanical wire. After disconnecting the mechanic's wire at the cable, slot the rubber grommet cable insulator into the dash panel's opening. Set the hood release handle into the instrument panel and organize the cable so its arm rests on the latch. Push the cable case sideways into the Hood Latch keyhole and secure it with the cable cover into the hood latch lock. Afterward, connect the hood latch and attach the attaching clips on the cable case into the original holes in the strut tower, Fender, headlamp area and radiator closure panel crossmember.