How to Service and Repair a Thermostat on Chrysler Town & Country?

Drain the cooling system below the level of the thermostat as the first step. Then, take off the radiator upper hose from the connector on the outlet, remove the bolts attaching the connector and remove the connector. Reach into the thermostat outlet and remove the thermostat, then throw the gasket away and clean both sealing parts. To install the thermostat, carefully get rid of the metal bulges from the cutout of the outlet connector socket, so there is no need to restake the replacement thermostat. Arrange the thermostat so that the two locating notches on the thermostat line up with the connector and the thermostat air bleed is correctly placed. Cover the thermostat and connector with a new gasket, making sure the thermostat is in place in the recess. After seating the thermostat and connector assembly into the intake manifold, screw each bolt to 28 Nm (250 in. lbs.). After that, place the new upper hose onto the coolant outlet connector and top up the cooling system to its normal level.

How to Install a Thermostat for a 3.3/3.8L Engine on Chrysler Town & Country?

Since restaking will not be necessary, first take out the bulge in the metal that was made during installation of the OEM thermostat. Following that, match the two locating notches on the thermostat with the notches on the coolant outlet connector. Put a new gasket onto the thermostat and connector, confirming the thermostat is seated correctly in the given hole. Place the intake manifold, thermostat and connector assembly in position, tightening the bolts to a torque of 12 Nm (105 in. lbs.). Now, secure the upper hose of the radiator onto the coolant outlet and place the proper amount of antifreeze inside the system.

OEM Chrysler Town & Country Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Thermostats found

View related parts
Chrysler Town & Country Thermostat Housing Part Number: 68273161AA
$60.93 MSRP: $91.10
You Save: $30.17 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Thermostat; Engine Coolant Thermostat; Thermostat Housing Cover; Thermostat, Coolant
- Replaces: 4666140AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Town & Country | LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Thermostat Part Number: 4494470
$11.65 MSRP: $14.77
You Save: $3.12 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Thermostat-195 Degrees Purchasing; Engine Coolant Thermostat; Thermostat, Coolant
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1992, 1984-1988 Chrysler Town & Country | Base, Mark Cross | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Thermostat Part Number: MD972903
$17.28 MSRP: $21.90
You Save: $4.62 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Engine Coolant Thermostat
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984 Chrysler Town & Country | Base | 4 Cyl 2.6 L GAS
View related parts
Chrysler Town & Country Thermostat Part Number: 4573560AE
Product Specifications
- Other Name: Thermostat - Water Pump; Engine Coolant Thermostat; Thermostat, Coolant
- Replaces: 4573560AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-2007 Chrysler Town & Country | Base, LX, LXi, Limited, SX | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Thermostat Part Number: MD997310
Product Specifications
- Other Name: Thermostat Temperature Control; Thermostat And Gasket Package; Thermostat Package
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990 Chrysler Town & Country | Base | 6 Cyl 3.0 L GAS
View related parts
Chrysler Town & Country Thermostat Part Number: MD972905
Product Specifications
- Other Name: Thermostat Kit Radiator; Engine Coolant Thermostat
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chrysler Town & Country | Base | 4 Cyl 2.6 L GAS
View related parts
Chrysler Town & Country Thermostat Part Number: P4573560AA
Product Specifications
- Other Name: Thermostat - Water Pump
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Thermostat

Choose OEM Thermostat that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Thermostat follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Thermostat in Chrysler Town & Country vehicles is a very important part in the engine cooling system of the automobiles. Sitting adjacent to the radiator, the Chrysler Town & Country Thermostat is a type of closed-loop control that regulates the levels of coolant coming into the body of the vehicle according to the required temperature. For the Chrysler Town & Country models the following thermostats have been used over the years mechanical and they include the bimetallic strip and wax pellet thermostat. These devices work through the mechanism of either expanding or contracting influenced by the temperatures involved thus regulating engine heat. The development of such thermostats has made the Chrysler Town & Country's cooling system efficient and effective to the performance of this automobile and comfort of riders.

Chrysler Town & Country Thermostat Parts and Q&A

Thermostat
P4573560AA
Q: How to Service and Repair a Thermostat on Chrysler Town & Country?
A:
Drain the cooling system below the level of the thermostat as the first step. Then, take off the radiator upper hose from the connector on the outlet, remove the bolts attaching the connector and remove the connector. Reach into the thermostat outlet and remove the thermostat, then throw the gasket away and clean both sealing parts. To install the thermostat, carefully get rid of the metal bulges from the cutout of the outlet connector socket, so there is no need to restake the replacement thermostat. Arrange the thermostat so that the two locating notches on the thermostat line up with the connector and the thermostat air bleed is correctly placed. Cover the thermostat and connector with a new gasket, making sure the thermostat is in place in the recess. After seating the thermostat and connector assembly into the Intake Manifold, screw each bolt to 28 Nm (250 in. lbs.). After that, place the new upper hose onto the coolant outlet connector and top up the cooling system to its normal level.
Thermostat Housing
68273161AA
Q: How to Install a Thermostat for a 3.3/3.8L Engine on Chrysler Town & Country?
A:
Since restaking will not be necessary, first take out the bulge in the metal that was made during installation of the OEM thermostat. Following that, match the two locating notches on the thermostat with the notches on the coolant outlet connector. Put a new gasket onto the thermostat and connector, confirming the thermostat is seated correctly in the given hole. Place the Intake Manifold, thermostat and connector assembly in position, tightening the bolts to a torque of 12 Nm (105 in. lbs.). Now, secure the upper hose of the radiator onto the coolant outlet and place the proper amount of antifreeze inside the system.