How to Service and Repair a CV Boot and CV Joint for Outer on Chrysler Voyager?

The first step is to take off the half shaft from the vehicle that has the damaged Constant Velocity Joint Boot. Unscrew the big clamp that fixes the sealing boot to the CV joint and discard it, along with the little clamp securing the outer CV joint sealing boot to the shaft. Pull the boot off the housing and down the item joining the two shafts and wipe away excess grease to uncover the retaining ring. To get to the retaining ring, spread the ears apart and take off the outer CV joint and boot by sliding them off the interconnecting shaft. Examine the outer CV joint and interconnecting joint for signs of excessive wear; if anything looks damaged, the half shaft needs to be replaced since parts can't be fixed. Slide first the new small diameter seal over the interconnecting shaft, then insert the new outer CV joint assembly sealing boot over it. Slide the outer CV joint assembly onto the interconnecting shaft and push it until the retaining ring fits securely in its groove. Rub half of the seal grease on the outer CV joint assembly housing and add the other half to the sealing boot. Lay the outer CV joint seal boot retaining clamp over the interconnecting shaft and slide the boot so that just a thin band of the shaft is exposed. Use your crimping tool on the bridge of the clamp and keep twisting the nut until the jaws are fully closed. Check that the boot's seal is not dented or loose; alternatively, use your hands to restore its original shape, even out the edges and make it flat. Move the sealing boot to go into the groove on the outside housing unit, then evenly fit the sealing boot retaining clamp. Use C-4975-A crimping tool on the bridge of the clamp, then turn the nut till the jaws are firmly pressed together. The last step is to reinstall the half shaft that needed a boot onto your car.

OEM Chrysler Voyager CV Boot

Axle Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 CV Boots found

View related parts
Chrysler Voyager Boot Kit, Front Outer Passenger Side Part Number: 4641181
Product Specifications
- Other Name: Boot - Half Shaft; CV Joint Boot Kit, Front Left Outer, Front Right Outer; CV Boot; Outer Boot; Boot Package, Outer CV; Boot Kit Half Shaft Outer; Boot Package, Inner
- Position: Front Outer Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chrysler Voyager | Base, Ec, LX, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Axle Boots Part Number: 4641245
Product Specifications
- Other Name: Boot - Half Shaft; Boots; Boot; Boot Kit Half Shaft; Boot Package
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Boots, Rear Outer Passenger Side Part Number: 5016941AA
Product Specifications
- Other Name: Boot Kit - Half Shaft; CV Joint Boot Kit, Rear Left Inner, Rear Left Outer, Rear Right Inner, Rear Right Outer; CV Boot; Boot; Boot Kit Half Shaft
- Position: Rear Outer Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Inner Boot, Front Passenger Side Part Number: 5017781AA
Product Specifications
- Other Name: Boot Kit - Half Shaft; CV Joint Boot Kit, Front Right Inner; CV Boot; Boot Kit Half Shaft Inner
- Position: Front Inner Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Boot Kit, Front Inner Passenger Side Part Number: 4797700
Product Specifications
- Other Name: Boot Kit - Half Shaft; CV Joint Boot Kit, Front Left Inner, Front Right Inner; CV Boot; Inner Boot; Boots; Boot Package, Inner CV Right W/ABS; Boot Package, Inner CV Left; Boot Kit Half Shaft Inner
- Position: Front Inner Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chrysler Voyager | Base, Ec, LX, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Boot Kit, Front Inner Passenger Side Part Number: 4797699
Product Specifications
- Other Name: Bootkit - Halfshaft; CV Joint Boot Kit, Front Left Inner, Front Right Inner; CV Boot; Inner Boot; Boots; Boot Package, Inner CV Right W/ABS; Boot Package, Inner CV Right; Boot Kit Half Shaft Inner
- Position: Front Inner Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Chrysler Voyager CV Boot

Choose OEM CV Boot that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each CV Boot follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Voyager CV Boot is, therefore, a crucial part which defines the reliability and performance of the Chrysler's minivan range. Primarily the CV Boot was created in order to safeguard the Constant Velocity (CV) joints Its primary function is too prevent wear of the boot hence enabling the smooth transmittance of power to the wheels from the transaxle. Consequently, this flexible rubber or plastic part holds the required lubricant but at the same time shields the CV joints that are pivotal for the operation of the car from accumulation of dirt and debris. A chrysler voyager can incorporate; the outer ends of CV joints uses the Rzeppa type and for the inner ends, it uses the tripod or double offset types of joints. The timing belt CV Boot must be checked often since, if damaged, it will affect the CV joint and its effectiveness for performance and safety. The Chrysler Voyager CV Boot is uniquely built in the automotive market since it has high quality convection and it is made to withstand harsh conditions to ensure it lasts longer and it works well. The Chrysler Voyager sales have crossed 12 million units, and one could safely assume that it is one of the most reliable vehicles available for buyers, both, families and individuals. The role of CV Boot in the Chrysler Voyager cannot be underestimated, it makes the car safer and efficient to drive and providing the users with a pleasant driving experience. Therefore, it is appropriate to conclude that Chrysler Voyager CV Boot is a prime manifestation of Chrysler Corporation's commitment to quality and creativity in auto industry.

Chrysler Voyager CV Boot Parts and Q&A

Boot Kit, Front Outer Passenger Side
4641181
Q: How to Service and Repair a CV Boot and CV Joint for Outer on Chrysler Voyager?
A:
The first step is to take off the half shaft from the vehicle that has the damaged Constant Velocity Joint Boot. Unscrew the big clamp that fixes the sealing boot to the CV joint and discard it, along with the little clamp securing the outer CV joint sealing boot to the shaft. Pull the boot off the housing and down the item joining the two shafts and wipe away excess grease to uncover the retaining ring. To get to the retaining ring, spread the ears apart and take off the outer CV joint and boot by sliding them off the interconnecting shaft. Examine the outer CV joint and interconnecting joint for signs of excessive wear; if anything looks damaged, the half shaft needs to be replaced since parts can't be fixed. Slide first the new small diameter seal over the interconnecting shaft, then insert the new outer CV joint assembly sealing boot over it. Slide the outer CV joint assembly onto the interconnecting shaft and push it until the retaining ring fits securely in its groove. Rub half of the seal grease on the outer CV joint assembly housing and add the other half to the sealing boot. Lay the outer CV joint seal boot retaining clamp over the interconnecting shaft and slide the boot so that just a thin band of the shaft is exposed. Use your crimping tool on the bridge of the clamp and keep twisting the nut until the jaws are fully closed. Check that the boot's seal is not dented or loose; alternatively, use your hands to restore its original shape, even out the edges and make it flat. Move the sealing boot to go into the groove on the outside housing unit, then evenly fit the sealing boot retaining clamp. Use C-4975-A crimping tool on the bridge of the clamp, then turn the nut till the jaws are firmly pressed together. The last step is to reinstall the half shaft that needed a boot onto your car.