Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM Chrysler Voyager Idle Control Valve

IACV
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Idle Control Valve found

  • Chrysler Voyager Idle Control Valve - 4861164AB
    Chrysler Voyager Idle Control Valve Diagram - 4861164AB
    View related parts

    Chrysler Voyager Idle Speed Control Part Number: 4861164AB

    $73.73 MSRP: $163.00
    You Save: $89.27 (55%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Motor - Air Idle Speed
    • Replaces: 4861164AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2000-2002 Chrysler Voyager | Base, Ec, LX | 2.4L L4, 3.0L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Chrysler Voyager Idle Control Valve

Choose OEM Idle Control Valve that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Idle Control Valve follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Voyager Idle Control Valve Parts and Q&A

  • Chrysler Voyager Idle Control Valve - 4861164AB Idle Speed Control Idle Speed Control
    4861164AB
    Q: How to Service Throttle Body Components and Install the Idle Control Valve on Chrysler Voyager?
    A:
    Whenever you service Throttle Body components, be sure to install new O-rings and seals as needed, without any lubricant to damage them; if you find assembly tough, then apply water or just a bit of engine oil on only the O-rings. Overall steps are: take off the negative cable from the battery, then remove the electrical connection and screws near the idle air control motor. The new idle air control motor for installation will already have an O-ring installed; for 2.4L engines, if the pintle measures more than 1 inch (25 mm), use the DRB Idle Air Control Motor Open/Close Test while the battery is connected to lower the pintle. After that, set the air control motor into the throttle body, tighten the mounting screws to 17 in-lbs., hook up the electrical connector and connect the negative battery cable.

Related Chrysler Voyager Parts

Browse Chrysler Voyager Idle Control Valve by Years

+
2002 2001 2000