How to Maintain and Fix a Liftgate Hinge on Chrysler Voyager?

At the start of servicing or fixing the trunk or liftgate hinge, release the liftgate latch and bring the liftgate up. Set the liftgate in its fully open position, use a suitable device to raise it and apply numerous layers of duct tape on the outside of the roof around the gap to the liftgate. Bolt out the bolts that attach the liftgate hinge to the roof header and pull the VTSS switch from the body harness. After that, unfasten the hinge's bolts, then remove the hinge from the vehicle. Should you need to, paint the replacement part before putting it in. Fit the hinge at the vehicle, make sure it lines up with the marks on the liftgate and screw the bolts until they are tight at 33 N.m (24 ft.lbs.). Adjust the position of the hinge until it lines up with the printout's marks on the roof header, then add the bolts and tighten the outer two bolts to 33 N.m (24 ft.lbs.) and the center sheet metal screw to 12 N.m (105 in.lbs.). After that, take off the duct tape from the roof and liftgate and confirm that the liftgate is aligned properly.

OEM Chrysler Voyager Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Liftgate Hinges found

View related parts
Chrysler Voyager Hinge, Rear Passenger Side Part Number: 68229150AE
$36.65 MSRP: $53.60
You Save: $16.95 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Right; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Passenger Side
- Replaces: 68229150AD, 68229150AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Hinge Part Number: 5020513AB
$23.37 MSRP: $33.60
You Save: $10.23 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge; Door Hinge; Hinge Liftgate
- Replaces: 4860295AC, 4860295AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chrysler Voyager | Base, Ec, LX, SE | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Hinge, Rear Driver Side Part Number: 68229151AE
$36.17 MSRP: $53.60
You Save: $17.43 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear Left; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear Driver Side
- Replaces: 68229151AC, 68229151AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Hinge Part Number: 5020512AB
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge; Door Hinge; Hinge Liftgate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chrysler Voyager | Base, Ec, LX, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Chrysler Voyager Liftgate Hinge

Choose OEM Liftgate Hinge that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Liftgate Hinge follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Voyager Liftgate Hinge serves as a central functional element which guarantees safe and dependable operation of rear storage opening in Chrysler Voyager vehicles. The Liftgate Hinge creates simple rear compartment entry for storage activities which improves both safety and operational efficiency of the Voyager. The Liftgate Hinge supports the liftgate in its open position thus becoming a necessary component that enables proper operation of the trunk or tailgate within Chrysler Voyager vehicles. Proper selection of Liftgate Hinge depends on the compatibility checks between different Voyager models because each model uses distinct bolt sizes and mounting methods. Improper maintenance of Liftgate Hinges together with immediate replacement of damaged parts remain vital for both safety operations and performance efficiency in Chrysler Voyager models. The Liftgate Hinge represents a standout automotive component because it offers strong durability and handles everyday usage challenges which has made the model known as an enduring vehicle. The Chrysler automobile sales reached more than 12 million units because families continue choosing this model with the Liftgate Hinge being a key factor in its widespread adoption. The reliable function of the storage access provided by the Chrysler car Liftgate Hinge makes it an essential component of this the automaker model vehicle series.

Chrysler Voyager Liftgate Hinge Parts and Q&A

Hinge
5020512AB
Q: How to Maintain and Fix a Liftgate Hinge on Chrysler Voyager?
A:
At the start of servicing or fixing the trunk or liftgate hinge, release the liftgate latch and bring the liftgate up. Set the liftgate in its fully open position, use a suitable device to raise it and apply numerous layers of duct tape on the outside of the roof around the gap to the liftgate. Bolt out the bolts that attach the liftgate hinge to the roof header and pull the VTSS switch from the body harness. After that, unfasten the hinge's bolts, then remove the hinge from the vehicle. Should you need to, paint the replacement part before putting it in. Fit the hinge at the vehicle, make sure it lines up with the marks on the liftgate and screw the bolts until they are tight at 33 N.m (24 ft.lbs.). Adjust the position of the hinge until it lines up with the printout's marks on the roof header, then add the bolts and tighten the outer two bolts to 33 N.m (24 ft.lbs.) and the center sheet metal screw to 12 N.m (105 in.lbs.). After that, take off the duct tape from the roof and liftgate and confirm that the liftgate is aligned properly.