How to Maintain and Fix a Timing Cover on Chrysler Voyager?

First, take out the crankshaft damper and the tensioner for the generator drive belt to work on the timing belt cover. Following that, unfasten the bolts around the timing belt front cover and remove the covers. After that, take out the front covers and the engine mount bracket. Once you've done that, remove the timing belt, while using Special Tool 6847 to hold the camshaft sprocket as you take out the central bolt. Remove the timing belt idler pulley and unfasten the rear cover's mounting screws after that and then remove the rear cover from the engine. The first step for installation is the timing belt rear cover and its bolts; do not use an impact wrench on the camshaft sprocket bolt, as it could break the timing pin and use a wrench only for hand tightening. Hold the camshaft sprockets in place with Special Tool 6848 and tighten the center bolt to 101 Nm (75 ft. lbs.). Then, fit the timing belt idler pulley and tighten its bolt to 61 Nm (45 ft. lbs.), after which fit the timing belt. Attach and tighten the engine mount bracket with bolts at 61 Nm (45 ft. lbs.) and fit and tighten the front covers using bolts at 7 Nm (60 in. lbs.). Lastly, replace the generator drive belt tensioner and the crankshaft vibration damper.

How to Remove and Install Timing Covers on Chrysler Voyager?

The covers for the timing belt can be removed after you get rid of the vibration damper and the generator drive belt tensioner assembly. After that, loosen and remove the front timing belt cover bolts and take the covers out. Remove the front covers from the tune-up procedure and then take off the timing belt and the engine mount bracket for the rear cover. After using Special Tool 6847 to hold the camshaft sprocket, use a special tool to remove the center bolt, then take away the timing belt idler pulley. Pop off the rear cover fasteners and lift the cover from the engine. Begin installing the timing belt rear cover and bolt it in place, remembering not to use an impact wrench on the camshaft sprocket bolt, since that can damage the timing locating pin. After installing the camshaft sprockets, hold them in place with Special Tool 6848 and tighten the center bolt to 101 Nm (75 ft. lbs.). After that, place the timing belt idler pulley and secure it with a bolt tightened to 61 Nm (45 ft. lbs.). After you have reattached the engine mount bracket and tightened the bolts to 61 Nm, install the front covers and hold them in place for now as you tighten the fasteners to 7 Nm. After that, attach the generator drive belt tensioner and the crankshaft vibration damper.

OEM Chrysler Voyager Timing Cover

Engine Timing Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Timing Covers found

View related parts
Chrysler Voyager Timing Cover, Inner Part Number: 4781593AA
$98.76 MSRP: $138.00
You Save: $39.24 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Timing Case; Engine Timing Cover, Inner; Front Cover; Inner Cover; Inner Timing Cover; Cover Timing Belt; Cover Timing Case
- Position: Inner
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Voyager | LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Timing Cover Part Number: 4893783AG
$531.43 MSRP: $1145.00
You Save: $613.57 (54%)
ADD TO CART
Product Specifications
- Other Name: Cover - Chain Case; Engine Timing Cover; Front Cover; Cover Chain Case
- Replaces: 4893783AF, 4893783AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Upper Timing Cover Part Number: MD332316
$6.34 MSRP: $8.03
You Save: $1.69 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Timing Belt; Timing Cover; Upper Cover; Cover Timing Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base | 6 Cyl 3.0 L GAS
View related parts
Chrysler Voyager Timing Cover Part Number: MD156911
$27.51 MSRP: $34.87
You Save: $7.36 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Timing Belt; Upper Timing Cover; Upper Cover; Outer Timing Cover; Cover Assembly, Timing Belt Outer, Upper; Cover Timing Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base | 6 Cyl 3.0 L GAS
View related parts
Chrysler Voyager Front Cover, Lower Outer Part Number: 4621592AD
$29.51 MSRP: $37.41
You Save: $7.90 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Timing Belt; Engine Timing Cover, Lower Outer, Outer Lower; Outer Timing Cover; Cover Timing Belt; Timing Cover
- Position: Lower Outer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Voyager | LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Timing Cover Part Number: 4897571AD
$812.60 MSRP: $932.00
You Save: $119.40 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Package - Engine Timing; Front Cover
- Replaces: 4897571AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Timing Cover Part Number: MD144769
Product Specifications
- Other Name: Cover - Timing Belt; Lower Cover; Timing Belt Outer, Lower Up To 9/88; Cover Assembly, Timing Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base | 6 Cyl 3.0 L GAS
View related parts
Chrysler Voyager Front Cover, Upper Outer Part Number: 4648935AA
Product Specifications
- Other Name: Cover - Timing Belt; Engine Timing Cover, Inner, Outer Upper, Upper Outer; Inner Timing Cover; Outer Timing Cover; Cover Timing Belt; Timing Cover
- Position: Upper Outer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Voyager | LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Lower Cover Part Number: MD301133
Product Specifications
- Other Name: Gasket - Timing Belt Cover; Timing Cover Gasket; Timing Cover Seal; Timing Cover; Lower Cover Seal
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base | 6 Cyl 3.0 L GAS
View related parts
Chrysler Voyager Front Cover Part Number: 5093085AA
Product Specifications
- Other Name: Cover Package - Timing; Timing Cover; Outer Timing Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Front Cover Part Number: 5093084AA
Product Specifications
- Other Name: Cover Package - Timing; Outer Timing Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2002 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Timing Cover, Inner Part Number: 4694318AD
Product Specifications
- Other Name: Cover - Timing Belt; Engine Timing Cover, Inner; Front Cover; Inner Cover; Inner Timing Cover; Cover Timing Belt
- Position: Inner
- Replaces: 4694318, 4694318AC, 4694318AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Voyager | Base, Ec, LX | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Front Cover Part Number: 4621447
Product Specifications
- Other Name: Cover - Timing Belt; Timing Cover; Outer Timing Cover; Cover Assembly, Timing Belt - Outer Upper; Cover Timing Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base | 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Timing Cover Part Number: 5019333AF
Product Specifications
- Other Name: Cover Package - Engine Timing; Engine Timing Cover; Front Cover
- Replaces: 5019333AB, 5019333AC, 5019333AE, 5019333AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, LX | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Chrysler Voyager Timing Cover

Choose OEM Timing Cover that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Timing Cover follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Voyager Timing Cover is a critical part that acts as a shield to the engine's time relatedapplication components such as the timing belt, timing chain, or cam belt. For so many years already, Chrysler Voyager Timing Cover has gained fame for its reliability and performance that require materials that will keep out contaminants such as dirt since precious elements of the engine can be damaged by such. This Timing Cover will find applications on many Voyager models so it is great for Chrysler fans. It frequently uses gaskets to add to the safety of the timing belt and thus improve the efficiency of the vehicle. Therefore, examination of Chrysler Voyager Timing Cover should be a regular process, and replacement timely so that it does not cause a failure that may inhibit vehicle operation. Besides offering protection to the timing system it is crucial element that contributes to the durability of the timing cover and the efficiency of the engines timing system. Chrysler Voyager has currently recorded 12 million units off the assembly line, and with this Timing Cover, the company proves that minivans are efficient and sturdy modes of transport. Some of the features that are unique to this product include its durability and the ability to fit Chrysler Voyager Timing Cover on any type of engine; this keeps the automobiles on the road for a long time.

Chrysler Voyager Timing Cover Parts and Q&A

Timing Cover, Inner
4781593AA
Q: How to Maintain and Fix a Timing Cover on Chrysler Voyager?
A:
First, take out the crankshaft damper and the tensioner for the generator drive belt to work on the Timing Belt cover. Following that, unfasten the bolts around the timing belt front cover and remove the covers. After that, take out the front covers and the engine mount bracket. Once you've done that, remove the timing belt, while using Special Tool 6847 to hold the camshaft sprocket as you take out the central bolt. Remove the timing belt idler pulley and unfasten the rear cover's mounting screws after that and then remove the rear cover from the engine. The first step for installation is the timing belt rear cover and its bolts; do not use an impact wrench on the camshaft sprocket bolt, as it could break the timing pin and use a wrench only for hand tightening. Hold the camshaft sprockets in place with Special Tool 6848 and tighten the center bolt to 101 Nm (75 ft. lbs.). Then, fit the timing belt idler pulley and tighten its bolt to 61 Nm (45 ft. lbs.), after which fit the timing belt. Attach and tighten the engine mount bracket with bolts at 61 Nm (45 ft. lbs.) and fit and tighten the front covers using bolts at 7 Nm (60 in. lbs.). Lastly, replace the generator drive Belt Tensioner and the crankshaft vibration damper.
Front Cover
5093084AA
Q: How to Remove and Install Timing Covers on Chrysler Voyager?
A:
The covers for the Timing Belt can be removed after you get rid of the vibration damper and the generator drive Belt Tensioner assembly. After that, loosen and remove the front timing belt cover bolts and take the covers out. Remove the front covers from the tune-up procedure and then take off the timing belt and the engine mount bracket for the rear cover. After using Special Tool 6847 to hold the camshaft sprocket, use a special tool to remove the center bolt, then take away the timing belt idler pulley. Pop off the rear cover fasteners and lift the cover from the engine. Begin installing the timing belt rear cover and bolt it in place, remembering not to use an impact wrench on the camshaft sprocket bolt, since that can damage the timing locating pin. After installing the camshaft sprockets, hold them in place with Special Tool 6848 and tighten the center bolt to 101 Nm (75 ft. lbs.). After that, place the timing belt idler pulley and secure it with a bolt tightened to 61 Nm (45 ft. lbs.). After you have reattached the engine mount bracket and tightened the bolts to 61 Nm, install the front covers and hold them in place for now as you tighten the fasteners to 7 Nm. After that, attach the generator drive belt tensioner and the crankshaft vibration damper.