How to Replace a Front Wiper Motor on Chrysler Voyager?

To install a new front wiper motor, first take out the wiper proper and continue with removing the motor and its mounting plate. Cut the wires running from the wiper motor and take the linkage away from the motor crank, but keep the crank connected to the motor. After that, take off the bolts connecting the motor to the mount plate and remove the motor from the assembly. While installing, lay the wiper unit on a proper surface and hook the wiper motor onto its mount plate, using bolts to fasten it in place. Put the wiper linkage and motor mount plate back into the wiper unit, then plug the electrical looms onto the wiper motor. Interior equipment of your vehicle, the control unit is attached to where the wiper motor is connected to the motor inside the blades. Turn off the car's parking lights when the wiper switch is off and make sure the wiper motor parks as intended.

How to Replace a Rear Wiper Motor on Chrysler Voyager?

Before replacing the wiper motor, you should disconnect and isolate the car's battery negative wire. First, take out the rear wiper arm and next, remove the liftgate trim panel. Disconnect the wire connector from the motor powering the rear wiper and take out the screws on the liftgate, to remove the motor after that. For assembly, put the new wiper motor in the liftgate and attach the retaining screws. Place the wire harness connector into the battery and attach the liftgate trim panel to its place. Attach the rear wiper motor wire back to the connector and then fasten the motor to the liftgate with screws. Close the liftgate and connect the wiper arm while the battery negative cable is still not connected.

OEM Chrysler Voyager Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wiper Motors found

View related parts
Chrysler Voyager Wiper Motor Part Number: 68233454AA
$78.18 MSRP: $174.00
You Save: $95.82 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor; Motor Liftgate Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Wiper Motor Part Number: 4673010
$23.56 MSRP: $67.60
You Save: $44.04 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Liftgate Wiper; Rear Motor; Motor Liftgate Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Wiper Motor Assembly Part Number: 5114534AB
$276.25 MSRP: $418.00
You Save: $141.75 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit - Windshield Wiper; Windshield Wiper Motor; Wiper Motor; Module Assembly
- Replaces: 5114534AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Wiper Motor Part Number: 68316735AA
$117.08 MSRP: $177.00
You Save: $59.92 (34%)
ADD TO CART
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Front Motor; Motor Windshield Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Wiper Motor Part Number: 4717710AD
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor; Motor Liftgate Wiper
- Replaces: 5018406AC, 5018406AA, 4717710AB, 5018406AB, 4717710AC, 5073282AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Front Motor Part Number: RL673013AB
Product Specifications
- Other Name: Motor - Windshield Wiper; Motor
- Replaces: 4673013AB, 4673013AA, R4673013
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 2.4L L4, 3.0L V6, 3.3L V6, 3.8L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

Chrysler Voyager Wiper Motor

Choose OEM Wiper Motor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Wiper Motor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

One of the very important car parts like Chrysler Voyager Wiper Motor set that displays its reliability and performance in a car. Being the wiper motor that is responsible for operating the windshield wipers, it guarantees that the driver enjoys clear vision by removing rain, snow, and other obstacles on the road. The option of using high and low speeds makes it easier to shoot depending on the weather, which increases productivity and minimizes the risks on the road. Since Chrysler Voyager wiper motor is versatile it can suit several number of voyager models hence it favors those owning voyager vehicles in as much as they prefer functional wiper motors. This car part is offered in new and used versions and ensures durably good service regardless of the price range that the client is willing to pay. Friendly to the durability of the Chrysler Voyager is the quality of Wiper Motor that is designed to endure the not-so-friendly use. Some of the unique selling propositions are easy installation for its electrical connections, and ease of control of speed among other aspects attributed to the automotive business. Chrysler Voyager sold in excess of 12 million units, it remains one of the favorites of families and individuals alike and the Wiper Motor is one of the parts that are vital for safe driving. All in all, Chrysler Voyager Wiper Motor can be described as an evidence of Chrysler's concern for quality and innovation, which makes it the vehicle's part that would never lose its significance.

Chrysler Voyager Wiper Motor Parts and Q&A

Wiper Motor
4717710AD
Q: How to Replace a Front Wiper Motor on Chrysler Voyager?
A:
To install a new front wiper motor, first take out the wiper proper and continue with removing the motor and its mounting plate. Cut the wires running from the wiper motor and take the linkage away from the motor crank, but keep the crank connected to the motor. After that, take off the bolts connecting the motor to the mount plate and remove the motor from the assembly. While installing, lay the wiper unit on a proper surface and hook the wiper motor onto its mount plate, using bolts to fasten it in place. Put the wiper linkage and motor mount plate back into the wiper unit, then plug the electrical looms onto the wiper motor. Interior equipment of your vehicle, the control unit is attached to where the wiper motor is connected to the motor inside the blades. Turn off the car's parking lights when the wiper switch is off and make sure the wiper motor parks as intended.
Wiper Motor Assembly
5114534AB
Q: How to Replace a Rear Wiper Motor on Chrysler Voyager?
A:
Before replacing the wiper motor, you should disconnect and isolate the car's battery negative wire. First, take out the rear Wiper Arm and next, remove the liftgate trim panel. Disconnect the wire connector from the motor powering the rear wiper and take out the screws on the liftgate, to remove the motor after that. For assembly, put the new wiper motor in the liftgate and attach the retaining screws. Place the wire harness connector into the battery and attach the liftgate trim panel to its place. Attach the rear wiper motor wire back to the connector and then fasten the motor to the liftgate with screws. Close the liftgate and connect the wiper arm while the battery negative cable is still not connected.