Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Mopar 5083344AB
Switch Package - Stop Lamp

2001-2012 Mopar 5083344AB

Customer Questions & Expert Answers (26)
Mopar 5083344AB Switch Package - Stop Lamp
  • Part Description
    SW PKG-STOP LAMP
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 5083344AB Switch Package - Stop Lamp is Ref No. 16 in the diagram below

    2006 Dodge Ram 1500 Switch Package - Stop Lamp Diagram for 5083344AB
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 5083344AB

  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2009 Chrysler AspenLimited, Limited Hybrid8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
    2001-2010 Chrysler PT CruiserBase, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring4 Cyl 2.4 L GAS
    2004-2008 Chrysler PacificaBase, LX, Limited, Touring6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
    2007-2008 Chrysler SebringBase, LX, Limited, Touring4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
    2001-2009 Chrysler Town & CountryBase, EL, EX, LX, LXi, Limited, Touring6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
    2001-2003 Chrysler VoyagerBase, Ec, LX4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    2008 Dodge AvengerR/T, SE, SXT4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
    2007-2008 Dodge CaliberR/T, SE, SRT-4, SXT4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    2001-2007 Dodge CaravanBase, C/V, Ec, SE, SXT, Sport4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
    2001-2009 Dodge DakotaBase, Big Horn, Laramie, Lone Star, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX44 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 5083344AB works for my vehicle? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 5083344AB, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What should you avoid doing before completing the switch plunger adjustment for the 2007 Chrysler Aspen? Posted by Customer
    A:
    Do not release or pull up on the brake pedal.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    How do you remove the brake lamp switch for the 2007 Chrysler Pacifica? Posted by Customer
    A:
    Rotate it in a clockwise direction approximately 30 degrees and pull it out of the mount.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What are the final steps after installing the new switch for the 2004 Chrysler PT Cruiser? Posted by Customer
    A:
    Reinstall the knee blocker and silencer pad, reconnect the battery negative terminal, and reinstall the air cleaner cover.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    How do you remove the stop lamp switch from the brake pedal bracket for the 2007 Chrysler Sebring? Posted by Customer
    A:
    Rotate the switch in a counterclockwise direction approximately 30 degrees and then pull the switch rearward.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What should be done after removing the brake lamp switch for the 2006 Chrysler Town & Country? Posted by Customer
    A:
    Release the locking tab and disconnect the wiring connector from the switch.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What should you do after the switch body is fully seated for the 2008 Dodge Avenger? Posted by Customer
    A:
    Rotate it clockwise approximately 30° to lock it in place.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What components need to be removed to access the brake lamp switch for the 2002 Chrysler Voyager? Posted by Customer
    A:
    Remove the silencer panel located below the steering column and the knee blocker.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    How do you install the switch in its bracket for the 2008 Dodge Caliber? Posted by Customer
    A:
    Align the index tab with the notch in the brake pedal bracket and install the switch.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    How is the switch installed in its bracket for the 2006 Dodge Caravan? Posted by Customer
    A:
    Install the switch by aligning the index tab on the switch with the slot in the mounting bracket.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    How do you begin the installation process for the 2007 Dodge Dakota? Posted by Customer
    A:
    Begin by depressing and holding the brake pedal.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What should be done if the brake lamp switch is removed from the mounting bracket for the 2007 Dodge Durango? Posted by Customer
    A:
    It must be replaced with a new switch because the self-adjusting switch plunger is a one-time feature.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    How should the plunger be positioned before releasing the brake pedal for the 2009 Dodge Grand Caravan? Posted by Customer
    A:
    Ensure the plunger is fully extended before releasing the brake pedal to guarantee proper adjustment.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What safety precaution should be taken before servicing components related to the steering wheel for the 2009 Dodge Journey? Posted by Customer
    A:
    Disable the Supplemental Restraint System (SRS) by disconnecting the battery negative cable and waiting two minutes.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What should you do after removing the brake lamp switch for the 2003 Dodge Neon? Posted by Customer
    A:
    Disconnect the wiring harness from the switch connector and discard the old switch as it must not be reused.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What is the next step after removing the components from the knee blocker for the 2001 Dodge Ram 1500 Van? Posted by Customer
    A:
    Take out the knee blocker to access the switch.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    How do you begin the installation process for the 2009 Dodge Nitro? Posted by Customer
    A:
    Begin by depressing and holding the brake pedal.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What is the first step to service and repair the brake light switch for the 2004 Dodge Ram 1500? Posted by Customer
    A:
    Disconnect the switch harness.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What should be removed after the lower column cover for the 2002 Dodge Ram 2500 Van? Posted by Customer
    A:
    Remove the Data Link Connector, hood release lever, and park brake release lever from the knee blocker.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What is the first step for installation of the new switch for the 2004 Dodge Ram 3500? Posted by Customer
    A:
    Press and hold the brake pedal down.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What is the next step after removing the switch from the 2001 Dodge Ram 3500 Van? Posted by Customer
    A:
    Disconnect the wire harness and remove the switch.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What happens if the plunger adjustment is not done correctly for the 2006 Dodge Ram 2500? Posted by Customer
    A:
    If not done correctly, a new brake lamp switch must be installed.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What should be done with the brake lamp switch after removal for the 2009 Dodge Viper? Posted by Customer
    A:
    Discard the brake lamp switch as it must not be reused.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What is the next step after releasing the brake pedal for the 2007 Jeep Compass? Posted by Customer
    A:
    Reconnect the unibody wire harness connector to the brake lamp switch.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What must be done after securing the switch for the 2009 Jeep Liberty? Posted by Customer
    A:
    Rotate the plunger adjustment release lever clockwise until it locks into place, ensuring the lever is parallel to the brake lamp switch connector receptacle.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    Q:
    What should you avoid doing until the switch plunger adjustment is complete for the 2007 Jeep Patriot? Posted by Customer
    A:
    Do not release or pull up on the brake pedal.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Brake Light Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Switch Package - Stop Lamp 5083344AB Designed for Proper Fit and Performance

The Mopar part 5083344AB Switch Package - Stop Lamp comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Brake Light Switch component functions as a reliable support element for essential vehicle systems through its engineered design. This part 5083344AB Switch Package - Stop Lamp supports Jeep Liberty, Patriot, Compass alongside Dodge Ram 1500, Dakota, Durango, Chrysler Town & Country, Pacifica, Sebring. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 5083344AB. The authentic Mopar component produced by Mopar functions as a SW PKG-STOP LAMP.
The part 5083344AB uses durable material for construction. The product is offered in New condition and functions as a part to maintain vehicle compatibility. This part 5083344AB is necessary for every vehicle. The inventory system lists this product with SKU: 5083344AB. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.