How to Install a Fuel Pump on Dodge Avenger?

Before you install the module, clean the seal on the tank and change the O-ring seal. If your car has AWD, make the fuel connection between the fuel pump and the fuel level unit. Set the fuel pump module into the fuel tank along the reference mark and fasten it in place with the locking spanner 9340, until the lockring and module are well seated. After that, secure the fuel line to the fuel pump module and the electrical connector. Place the battery cable back, top off the fuel tank and use the scan tool to put pressure into the fuel lines, checking for leaks at the same time.

How to Safely and Effectively Remove a Fuel Pump Module on Dodge Avenger?

Make sure to wear safety gear and glasses before removing the fuel pump module, as there is a risk of getting injured by exposure to fuel. The high pressure on the fuel system needs to be released before you can start work. Make sure to mark where the fuel pump module lock-ring, fuel pump module and fuel tank are located for correct reinstallation. Unplug the fuel line from the pump module and blow compressed air to get rid of any dirt around the fuel tank opening. Put the lock-ring remover/installer 9340 in the holes of the lock-ring, attach a 1/2 inch drive breaker bar and move the bar from right to left to remove the lock-ring. There is a chance that the fuel pump module reservoir holds fuel which might leak when you remove it, so remove it carefully. Lift the fuel pump out of the tank gently, tilt it to allow any remaining fuel to run out and take it out without bending its float arm. Remove the last piece by discarding the rubber O-ring seal.

OEM Dodge Avenger Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fuel Pumps found

View related parts
Dodge Avenger Fuel Pump Part Number: 68004936AE
$450.91 MSRP: $640.00
You Save: $189.09 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit; Fuel Sender Assembly; Electric Fuel Pump; Fuel Level Sensor.; Fuel Gauge Sending Unit; Sending Unit
- Replaces: 68017714AC, 68004936AB, 68004936AC, 68004936AD, RL004936AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Dodge Avenger | 2.4L L4, 2.7L V6, 3.5L V6
View related parts
Dodge Avenger Fuel Pump Part Number: 68033083AF
$330.84 MSRP: $490.00
You Save: $159.16 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit
- Replaced by: 68033083AG
- Replaces: 68033083AB, 68033083AD, 68033083AE, 68033083AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Fuel Pump Part Number: 68138243AB
$520.46 MSRP: $789.00
You Save: $268.54 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Package - Fuel Pump/Level Unit; Electric Fuel Pump Assembly; Fuel Sending Unit.
- Replaced by: 68138243AC
- Replaces: 68138243AA, 68138245AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Dodge Avenger | R/T, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Fuel Pump Part Number: 68004475AF
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit
- Replaces: 68004475AA, 68004475AC, RL004475AB, 68004475AB, 68004475AD, 68004475AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Fuel Pump Part Number: MR134868
Product Specifications
- Other Name: Pump Assembly, Fuel; Fuel Pump and Strainer Set; Hanger Assembly; Module Assembly; Electric Pump; Sending Unit; Kit; Fuel Pump Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Fuel Pump Part Number: MR134804
Product Specifications
- Other Name: Pump - Fuel; Fuel Pump and Strainer Set; Hanger Assembly; Module Assembly; Electric Pump; Sending Unit; Kit; Pump Assembly, Fuel; Pump Fuel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Fuel Pump Part Number: 68021930AC
Product Specifications
- Other Name: Module Package - Fuel Pump/Level Unit; Electric Fuel Pump Assembly; Fuel Sending Unit.
- Replaces: 68021930AB, 68021930AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Avenger | R/T | 3.5L V6, 6 Cyl 3.5 L GAS

Dodge Avenger Fuel Pump

Choose OEM Fuel Pump that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fuel Pump follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Fuel Pump in Dodge Avenger cars is applied for the fuel delivery process starting from the tank and culminating in the combustion chamber. It functions by delivering fuel to either the carburetor or fuel injection system, based on the kind of engine. Electric fuel pumps are used in Dodge Avenger models for the fuel injection system with most of them are located within the fuel tank while carburetor models mostly use mechanical fuel pumps located outside the car. Years of Dodge Avenger manufacture have witnessed changes in theFuel Pump Technology whereby the traditional mechanical pumps were replaced with the modern electric pumps. The electric pumps work with greater pressure and have better cooling properties as compared to mechanical pumps which work only up to a certain pressure. The latest technology in the fuel pump Dodge Avenger is the electric fuel pump with better and improved performance and safety and with electronic control units for the management of fuel.

Dodge Avenger Fuel Pump Parts and Q&A

Fuel Pump
68004936AE
Q: How to Install a Fuel Pump on Dodge Avenger?
A:
Before you install the module, clean the seal on the tank and change the O-ring seal. If your car has AWD, make the fuel connection between the fuel pump and the fuel level unit. Set the fuel pump module into the fuel tank along the reference mark and fasten it in place with the locking spanner 9340, until the lockring and module are well seated. After that, secure the fuel line to the fuel pump module and the electrical connector. Place the Battery Cable back, top off the fuel tank and use the scan tool to put pressure into the fuel lines, checking for leaks at the same time.
Fuel Pump
68033083AF
Q: How to Safely and Effectively Remove a Fuel Pump Module on Dodge Avenger?
A:
Make sure to wear safety gear and glasses before removing the fuel pump module, as there is a risk of getting injured by exposure to fuel. The high pressure on the fuel system needs to be released before you can start work. Make sure to mark where the fuel pump module lock-ring, fuel pump module and fuel tank are located for correct reinstallation. Unplug the fuel line from the pump module and blow compressed air to get rid of any dirt around the fuel tank opening. Put the lock-ring remover/installer 9340 in the holes of the lock-ring, attach a 1/2 inch drive breaker bar and move the bar from right to left to remove the lock-ring. There is a chance that the fuel pump module reservoir holds fuel which might leak when you remove it, so remove it carefully. Lift the fuel pump out of the tank gently, tilt it to allow any remaining fuel to run out and take it out without bending its float arm. Remove the last piece by discarding the rubber O-ring seal.