How to Install an Intake Manifold on Dodge Avenger?

The first step in installing the intake manifold is cleaning all gasket areas and leaving a new intake manifold gasket in place. Next, attach the intake manifold and screw all the bolts so they are tightened to 25 Nm (220 in. lbs.). After that, connect the fuel rail assembly to the intake manifold, using 23 Nm of torque or 200 in. lbs. on the bolts and plug in the fuel injector cable. Look for any damage in the quick connect fittings and change them if you find anything wrong with them. Secure the fuel supply hose to the fuel rail assembly by pulling on the connector. Mount the air cleaner housing and put the negative battery cable back in place. Do a leak test by turning on the engine after filling the cooling system and then cover the engine with its housing.

How to Remove an Intake Manifold on Dodge Avenger?

Make sure the fuel pressure is off before taking out the intake manifold and work in a safe, well-ventilated spot, well cleared of anything that might ignite. First, take off the engine cover. After that, remove the air cleaner housing and detach the negative end of the battery cable. First remove the fuel line from the rail, then the electrical connections from the fuel injectors. Simply take out the bolts that secure the fuel rail when you are ready to remove it. After that, detach the oil temperature sensor and the power connectors from the variable valve timing solenoid and the intake camshaft position sensor, then move the harness out of the way. Take out the throttle body support bracket and break the connection to the electronic throttle control electrical wiring. Pull the wiring harness retainer out of the intake manifold and unplug the MAP sensor wires and the vacuum lines there. After that, take out the intake manifold retaining bolts and pull away the intake manifold.

OEM Dodge Avenger Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Intake Manifolds found

View related parts
Dodge Avenger Intake Manifold, Upper Part Number: 5184693AE
$381.29 MSRP: $560.00
You Save: $178.71 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake Manifold; Engine Intake Manifold, Upper; Intake Plenum; Plenum; Plenum Intake Manifold
- Position: Upper
- Replaces: 68621090AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Intake Manifold, Lower Part Number: 5184199AF
$381.29 MSRP: $560.00
You Save: $178.71 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Intake Plenum; Manifold Intake; Engine Intake Manifold
- Position: Lower
- Replaces: 5184199AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Intake Manifold Part Number: 4884495AK
$499.22 MSRP: $734.00
You Save: $234.78 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake
- Replaces: 4884495AG, 4884495AF, 4884495AI, 4884495AE, 4884542AC, 4884495AH, 4884495AJ, 4884495AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, R/T, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Intake Manifold Part Number: 4593915AB
$488.41 MSRP: $745.00
You Save: $256.59 (35%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake
- Replaces: 4593915AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010-2014 Dodge Avenger | Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Intake Manifold Part Number: 4593916AA
$349.23 MSRP: $513.00
You Save: $163.77 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Lux, Mainstreet, SE, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Intake Manifold Part Number: 4884882AE
Product Specifications
- Other Name: Manifold - Intake; Manifold Intake
- Replaces: 4884882AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Avenger | SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Intake Manifold, Lower Part Number: 4892233AA
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Avenger | R/T | 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Intake Manifold, Lower Part Number: 4892233AB
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Avenger | R/T | 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Intake Manifold, Lower Part Number: 4591960AC
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Avenger | R/T, SE, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Avenger Intake Plenum, Upper Part Number: 4591983AC
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum; Plenum Intake Manifold
- Position: Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Avenger | R/T, SE, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Avenger Intake Plenum, Upper Part Number: 4593649AD
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Plenum; Plenum Intake Manifold Includes Items In The Box; Plenum Intake Manifold
- Position: Upper
- Replaces: 4593649AC, 4593649AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | R/T | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Intake Manifold Part Number: MD333780
Product Specifications
- Other Name: Manifold; Manifold Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Avenger | Base, ES | 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Intake Manifold Part Number: MD309078
Product Specifications
- Other Name: Manifold Intake; Manifold, Inlet
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Intake Manifold Part Number: 4777101
Product Specifications
- Other Name: Manifold Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS
View related parts
Dodge Avenger Plenum Gasket, Upper Part Number: 4591983AB
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Intake Plenum Gasket; Intake Plenum; Plenum
- Position: Upper
- Replaces: 4591983AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Avenger | SE, SXT | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

Dodge Avenger Intake Manifold

Choose OEM Intake Manifold that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Intake Manifold follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Intake Manifold of Dodge Avenger vehicles, in facts, is an important component that disburses the air or air/fuel mixture to its cylinders, it has direct relationship to the power and performance of the car's engine. It working through the following steps, it takes air from the throttle body or carburetor as per the engine type with slight differences. For instance, carbureted engines utilize the manifold in providing fuel while the multiport fuel-injected engines have separate injectors for fuel. Some of the features which have changed over the years include the use of material like cast iron and aluminum which are replaced by new composite plastics, lighter and have better ability to shed heat. Certain models come with fully variable length intake manifolds whereby the length of the intake tract is changed in order to effect the airflow, and thus the performance, of the engine. These changes in the intake manifold design show that the manufacturers are intent to enhance the standard performance, efficiency ratios as well as power of the Dodge Avenger automobiles.

Dodge Avenger Intake Manifold Parts and Q&A

Intake Manifold, Lower
4892233AA
Q: How to Install an Intake Manifold on Dodge Avenger?
A:
The first step in installing the intake manifold is cleaning all gasket areas and leaving a new intake manifold gasket in place. Next, attach the intake manifold and screw all the bolts so they are tightened to 25 Nm (220 in. lbs.). After that, connect the Fuel Rail assembly to the intake manifold, using 23 Nm of torque or 200 in. lbs. on the bolts and plug in the fuel injector cable. Look for any damage in the quick connect fittings and change them if you find anything wrong with them. Secure the fuel supply hose to the fuel rail assembly by pulling on the connector. Mount the air cleaner housing and put the negative Battery Cable back in place. Do a leak test by turning on the engine after filling the cooling system and then cover the engine with its housing.
Intake Manifold
4593915AB
Q: How to Remove an Intake Manifold on Dodge Avenger?
A:
Make sure the fuel pressure is off before taking out the intake manifold and work in a safe, well-ventilated spot, well cleared of anything that might ignite. First, take off the engine cover. After that, remove the air cleaner housing and detach the negative end of the Battery Cable. First remove the fuel line from the rail, then the electrical connections from the fuel injectors. Simply take out the bolts that secure the Fuel Rail when you are ready to remove it. After that, detach the oil temperature sensor and the power connectors from the variable valve timing solenoid and the intake Camshaft Position Sensor, then move the harness out of the way. Take out the throttle body support bracket and break the connection to the electronic throttle control electrical wiring. Pull the wiring harness retainer out of the intake manifold and unplug the MAP Sensor wires and the vacuum lines there. After that, take out the intake manifold retaining bolts and pull away the intake manifold.