How to Install a Wheel Cylinder to Ensure Proper Brake Functionality on Dodge Avenger?

The wheel cylinder can now be installed, using it to place on the brake support plate and tighten the mounting screws to 13 Nm (115 in. lbs.). Next the brake tube nut is hand started into the wheel cylinder and tightened to 17 Nm (150 in. lbs.). Before going further, check the brake shoes. Fit the drum brake shoes and drum, adjusting the shoes, if necessary. Fasten the other tire and wheel assembly and tighten the wheel mounting nuts to 135 Nm (100 ft. lbs.). Then turn the rear wheel slowly until the brake drum drags lightly on the shoes. As needed, lower the vehicle, remove the brake pedal holder and bleed the wheel cylinder. Conduct a road test finally to verify the brakes works well.

OEM Dodge Avenger Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Cylinders found

View related parts
Dodge Avenger Wheel Cylinder Overhaul Kit Part Number: MB134975
$7.10 MSRP: $11.54
You Save: $4.44 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Brake Wheel Cylinder; Wheel Cylinder Repair Kit; Disc Brake Hardware Kit; Cup And Boot Package, Rear Brake Wheel Cylinder; Repair Package, Wheel Cylinder Rear.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Wheel Cylinder, Rear Part Number: 5191305AA
$71.08 MSRP: $108.00
You Save: $36.92 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder - Wheel; Drum Brake Wheel Cylinder, Rear; Wheel Cylinder Repair Kit; Cylinder Assembly Wheel; Cylinder Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Avenger | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Wheel Cylinder, Rear Part Number: MB193411
Product Specifications
- Other Name: Wheel Cylinder - Door Or Liftgate; Drum Brake Wheel Cylinder, Rear; Cylinder Assembly, Rear Brake Wheel; Cylinder, Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Dodge Avenger Wheel Cylinder

Choose OEM Wheel Cylinder that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Wheel Cylinder follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Wheel Cylinder in Dodge Avenger automobiles is part of the hydraulic drum brake system whose function is to push the brake shoes against the brake drum so as to enable halting of the automobile. It works on the principle of hydraulic mechanism in which the pressure builds up the pistons inside the cylinder to push the brake shoes against the drum. The Wheel Cylinder generally includes a central cylinder, two pistons having rubber sealing rings and an expander spring to hold the position of the said sealing rings. old Dodge avenger models used cast iron and aluminum Wheel Cylinders, find the current models aluminum Wheel Cylinders are preferred to avoid rust. Some designs include the use of two single piston arrangements although the general functions stays the same. It requires the normal inspection and the maintenance since any form of leakage might limit the braking power and then the Wheel Cylinder has to be rebuilt or replaced so that the car can be safely used.

Dodge Avenger Wheel Cylinder Parts and Q&A

Wheel Cylinder, Rear
5191305AA
Q: How to Install a Wheel Cylinder to Ensure Proper Brake Functionality on Dodge Avenger?
A:
The wheel cylinder can now be installed, using it to place on the brake support plate and tighten the mounting screws to 13 Nm (115 in. lbs.). Next the brake tube nut is hand started into the wheel cylinder and tightened to 17 Nm (150 in. lbs.). Before going further, check the brake shoes. Fit the drum brake shoes and drum, adjusting the shoes, if necessary. Fasten the other tire and wheel assembly and tighten the wheel mounting nuts to 135 Nm (100 ft. lbs.). Then turn the rear wheel slowly until the Brake Drum drags lightly on the shoes. As needed, lower the vehicle, remove the brake pedal holder and bleed the wheel cylinder. Conduct a road test finally to verify the brakes works well.