How to Remove and Replace a Rear Brake Pads on Dodge Avenger?

You should lift and support the vehicle and be sure to stick to safety instructions for brakes before removing and replacing the pads. Start by taking out the wheel mounting nuts and then the combined tire and wheel. When it's hard to take the caliper off the knuckle, pull out the rear of the caliper gently, move the guide pins and only then retract the caliper piston slightly. Following that, remove the bottom guide pin bolt from the disc brake caliper and move it upward with caution, not to extend the flex hose. Nudge the caliper just above the point where you can fit a wrench and fasten it into that position using wire or a bungee cord. Start by popping out the inboard brake pad from the bracket and next, pry the clip on the raised part of the caliper to take the outboard brake pad off.

How to Remove and Replace Front Brake Pads on Dodge Avenger?

Before you change the front brake pads, you should raise and support the vehicle. First, take out the wheel nut mounts and after that, remove the tire and wheel. Be sure to place the special sleeve from the upper bolt into the upper mounting hole when you are reinstalling everything. After that, take out the two bolts that hold the guide pins of the caliper. Unhook the caliper from the disc brake adapter and suspend it up with a wire or bungee cord to prevent overextending the brake hose. Then, take out the brake pads from the caliper adapter bracket.

OEM Dodge Avenger Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Pads found

View related parts
Dodge Avenger Brake Pads, Front Part Number: 68574695AA
$88.09 MSRP: $132.00
You Save: $43.91 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Parking Brake Shoe; Brake Shoes; Front Pads
- Position: Front
- Replaces: 5191229AA, 5191244AA, 5191231AA, 68020494AA, 68020494AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6
View related parts
Dodge Avenger Pad Kit - Rear Disc Brake Part Number: 5191271AD
$61.84 MSRP: $156.00
You Save: $94.16 (61%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PAD KIT-REAR DISC BRAKE
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Brake Pads, Rear Part Number: 68028671AA
$51.75 MSRP: $76.70
You Save: $24.95 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Rear Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Hardware Kit; Rear Pads; Pad Kit Rear Disc Brake; Disc Brake Pad Set
- Position: Rear
- Replaces: 68020256AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Front Pads Part Number: 1BP00289AA
$25.52 MSRP: $58.35
You Save: $32.83 (57%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit - Front Disc Brake
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2014 Dodge Avenger | R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Rear Pads Part Number: MR205144
Product Specifications
- Other Name: Pad Kit; Pad Package, Rear Brake; Pad Package Disc Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1998 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Brake Pads Part Number: MR205143
Product Specifications
- Other Name: Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit Front Disc Brake; Pad Package, Front Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Brake Pads, Front Part Number: MR389537
Product Specifications
- Other Name: Pad Kit - Front Disc Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Avenger | Base, ES | 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Brake Pads, Front Part Number: 68035576AA
Product Specifications
- Other Name: Pad Kit - Disc Brake; Disc Brake Pad Set, Front; Disc Brake Hardware Kit; Disc Brake Pad Kit; Front Pads; Pad Kit Disc Brake
- Position: Front
- Replaces: 5191217AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Avenger | Express, R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Dodge Avenger Brake Pads

Choose OEM Brake Pads that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Pads follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Brake Pads, including those on the Dodge Avenger, provide the friction that slows and stops your vehicle. More specifically, it presses against the brake rotor. Brake Pads feature a molded friction compound and a steel backing plate, which when the brakes are applied, the caliper closes up and the friction compound contacts the rotor. Thus, motion is converted into heat, which disperses into the air. All rotors work with two Brake Pads, and normal use wears the lining thinner. Owners of a Dodge Avenger must replace the Brake Pads once the lining is worn down to the manufacturer's minimum specification. Wear indicators can sound an audible alarm and some systems may also trigger a warning light on the dashboard, allowing time to replace the unit. Because stopping created a lot of heat, original equipment Dodge Avenger Brake Pads are tuned for everyday commuting and errands, as well as relaxed highway travel. Repeated hard stops, sustained high speeds or hauling heavy loads can lead the pads to overheat. This will lengthen stopping distances until the pads cool. With regular inspections, the Dodge Avenger brake system gives a consistent pedal feel and reliable performance for the Brake Pads.

Dodge Avenger Brake Pads Parts and Q&A

Brake Pads, Rear
68028671AA
Q:
How to Remove and Replace a Rear Brake Pads on Dodge Avenger?
A:
You should lift and support the vehicle and be sure to stick to safety instructions for brakes before removing and replacing the pads. Start by taking out the wheel mounting nuts and then the combined tire and wheel. When it's hard to take the caliper off the knuckle, pull out the rear of the caliper gently, move the guide pins and only then retract the caliper piston slightly. Following that, remove the bottom guide pin bolt from the disc Brake Caliper and move it upward with caution, not to extend the flex hose. Nudge the caliper just above the point where you can fit a wrench and fasten it into that position using wire or a bungee cord. Start by popping out the inboard brake pad from the bracket and next, pry the clip on the raised part of the caliper to take the outboard brake pad off.
Brake Pads, Front
68574695AA
Q:
How to Remove and Replace Front Brake Pads on Dodge Avenger?
A:
Before you change the front brake pads, you should raise and support the vehicle. First, take out the wheel nut mounts and after that, remove the tire and wheel. Be sure to place the special sleeve from the upper bolt into the upper mounting hole when you are reinstalling everything. After that, take out the two bolts that hold the guide pins of the caliper. Unhook the caliper from the disc brake adapter and suspend it up with a wire or bungee cord to prevent overextending the brake hose. Then, take out the brake pads from the caliper adapter bracket.