How to Install a Brake Fluid Level Sensor on Dodge Caliber?

Fit the brake fluid level switch against the mounting hole in the body of the master cylinder fluid reservoir's right side and push it in until you hear the switch tabs click, securing it. After that, link the wiring harness connector to the switch.

OEM Dodge Caliber Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
Dodge Caliber Level Sensor Part Number: 5175094AA
$10.79 MSRP: $15.50
You Save: $4.71 (31%)
Product Specifications
- Other Name: Sensor - Brake Fluid Level; Brake Fluid Level Switch; Fluid Level Sensor; Fluid Level Switch; Sensor Brake Fluid Level
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Brake Fluid Level Sensor

Choose OEM Brake Fluid Level Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Fluid Level Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Caliber Brake Fluid Level Sensor Parts and Q&A

Level Sensor
5175094AA
Q: How to Install a Brake Fluid Level Sensor on Dodge Caliber?
A:
Fit the brake fluid level switch against the mounting hole in the body of the master cylinder fluid reservoir's right side and push it in until you hear the switch tabs click, securing it. After that, link the wiring harness connector to the switch.