How to Remove and Replace the Under-Floor Catalytic Converter on Dodge Caliber?

The under floor catalytic converter is replaced by first installing the converter and its supports to the car's underbody. Put the spherical gasket on, making sure the white part is towards the back of the vehicle and then install the springs and bolts, tightening them to 33 Nm (24 ft. lbs.). After that, attach the I-Pipe/muffler assembly, making sure each part is straight and does not interfere with underbody pieces as you start from the front end. Be sure to tighten the band clamps to no more than 55 Nm, since if you overtighten past the center block's hourglass base, it could damage and shrink the clamps, so you have to replace them. Guarantee the clamps are facing upward when you are about to install them. Following installation, start the engine to look for exhaust leaks, address any issues and ensure the exhaust stays clear of any body panels.

How Is a Catalytic Converter Installed on Dodge Caliber?

Place the catalytic converter into the I-Pipe/muffler slot and surround it with a new gasket placed on the exhaust manifold. Add the flange nuts and tighten them until you reach 29 Nm (21 ft. lbs.). From the front, line up all components to the right position and with underbody parts, then fasten the band clamps at 55 Nm (40 ft. lbs.). Avoid clamping the band so tightly that both sides rest against the center hourglass-shaped block, because this will weaken the clamp and it will soon need to be changed. After you are done installing, start your car and check whether there are any exhaust leaks, repairing them as you find any. Besides PIT testing, have a look at the exhaust line to ensure it doesn't touch body panels and remove any contact if evident.

OEM Dodge Caliber Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Catalytic Converters found

View related parts
Dodge Caliber Catalytic Converter, Front Part Number: 57008368AA
$1083.94 MSRP: $1575.00
You Save: $491.06 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Front; Exhaust Pipe; Converter & Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Dodge Caliber | Express, Heat, Mainstreet, Rush, SE, SXT, SXT Plus, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Catalytic Converter, Rear Part Number: 5105049AC
$1790.40 MSRP: $2620.00
You Save: $829.60 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter, Rear; Exhaust Pipe; Converter & Pipe; Converter Catalytic If Vin Filtered, Check Item 4; Converter Catalytic
- Position: Rear
- Replaces: 5105049AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Caliber | R/T, Rush, SE, SXT, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Catalytic Converter Part Number: 5105126AD
$1579.15 MSRP: $2310.00
You Save: $730.85 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe; Converter Catalytic If Vin Filtered, Check Item 4; Converter Catalytic
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Catalytic Converter Part Number: 5290933AC
$422.13 MSRP: $609.00
You Save: $186.87 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Converter & Pipe; Converter Catalytic
- Replaces: 5290933AA, 5290933AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Catalytic Converter, Rear Part Number: 5105131AD
Product Specifications
- Other Name: Converter - Exhaust; Catalytic Converter, Rear; Exhaust Pipe; Converter & Pipe
- Position: Rear
- Replaces: 5105131AC, 5105131AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Caliber | R/T | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Catalytic Converter Part Number: 4854628AE
Product Specifications
- Other Name: Converter - Catalytic; Converter Catalytic
- Replaces: 4854628AC, 4854628AD, 4854628AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Caliber | SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Catalytic Converter Part Number: 5105460AF
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold; Exhaust Manifold
- Replaces: 5105460AD, 5105460AC, 5105460AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Caliber | R/T | 2.4L L4, 4 Cyl 2.4 L GAS

Dodge Caliber Catalytic Converter

Choose OEM Catalytic Converter that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Catalytic Converter follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Caliber Catalytic Converter is among the emission systems in the Dodge Caliber car models in regard to reliability and efficiency. This Catalytic Converter is instrumental in reducing the hazardous gases like Carbon Monoxide, Hydrocarbons, and Oxides of Nitrogen to less hazardous states making the Dodge Caliber more efficient and safer to operate. The Dodge Caliber Catalytic Converter Catalysts incorporated into the vehicle include platinum, palladium, and rhodium that enable redox reactions in the exhaust system to guarantee the best results for the vehicle's engine while at the same time having minimal impact on exhaust backpressure. It is matter of compatibility since the Caliber's catalytic converters can either be used directly or universally and fitting on different Caliber models that were manufactured in between 2007 and 2012. The direct fit option is preferred somewhat, since it simply screws into place and it can easily blend with the rest of the automobile. Furthermore, the Dodge Caliber has been appreciated for its safety measures by the Insurance Institute for Highway Safety; this is also impressive as it stresses the role of a functional Catalytic Converter in the general framework of the automobiles' construction. The calibre has stand out qualities like the solid build of the car and the good fuel efficiency of the Dodge Caliber and with the efficiency of its Catalytic Converter, it can be rated as one of the best in the market. Altogether, it should be stated that prolongation of the lifetime of the car via the application of the Dodge Caliber Catalytic Converter not only increases the car's capabilities but also ensures environmental safety.

Dodge Caliber Catalytic Converter Parts and Q&A

Catalytic Converter, Rear
5105131AD
Q: How to Remove and Replace the Under-Floor Catalytic Converter on Dodge Caliber?
A:
The under floor catalytic converter is replaced by first installing the converter and its supports to the car's underbody. Put the spherical gasket on, making sure the white part is towards the back of the vehicle and then install the springs and bolts, tightening them to 33 Nm (24 ft. lbs.). After that, attach the I-Pipe/muffler assembly, making sure each part is straight and does not interfere with underbody pieces as you start from the front end. Be sure to tighten the band clamps to no more than 55 Nm, since if you overtighten past the center block's hourglass base, it could damage and shrink the clamps, so you have to replace them. Guarantee the clamps are facing upward when you are about to install them. Following installation, start the engine to look for exhaust leaks, address any issues and ensure the exhaust stays clear of any body panels.
Catalytic Converter, Rear
5105049AC
Q: How Is a Catalytic Converter Installed on Dodge Caliber?
A:
Place the catalytic converter into the I-Pipe/Muffler slot and surround it with a new gasket placed on the Exhaust Manifold. Add the flange nuts and tighten them until you reach 29 Nm (21 ft. lbs.). From the front, line up all components to the right position and with underbody parts, then fasten the band clamps at 55 Nm (40 ft. lbs.). Avoid clamping the band so tightly that both sides rest against the center hourglass-shaped block, because this will weaken the clamp and it will soon need to be changed. After you are done installing, start your car and check whether there are any exhaust leaks, repairing them as you find any. Besides PIT testing, have a look at the exhaust line to ensure it doesn't touch body panels and remove any contact if evident.