How to Remove and Replace an Exhaust Manifold on Dodge Caliber?

Before changing the exhaust manifold on a front-wheel drive car, take off the engine cover. Lift the negative cable from the battery afterward and then unscrew the bolts attaching the top shield to pull it out. First, remove the exhaust pipe from the manifold, then get rid of the manifold support bracket. When you have done that, detach the exhaust manifold heat shield and get rid of the electrical connector for the oxygen sensor. After that, take off the retaining fasteners for the exhaust manifold and toss out the existing gasket.

How to Install an Exhaust Manifold on Dodge Caliber?

When installing an exhaust manifold on a front-wheel drive car, first put a new exhaust manifold gasket in place without using any sealer. Set the exhaust manifold bolts to 34 Nm (25 ft. lbs.) and after that secure the exhaust manifold heat shields with 12 Nm (9 ft. lbs.). Then, use the exhaust manifold support bracket and put a fresh gasket over the catalytic converter. Couple the exhaust pipe to the manifold, turning the fasteners to 28 Nm (250 in. lbs.). Connect the sensor's electrical connector again, plug the negative cable into the battery and then return the engine cover and tighten the bolts until they're snug.

OEM Dodge Caliber Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Exhaust Manifolds found

View related parts
Dodge Caliber Exhaust Manifold Part Number: 4693321AD
$321.77 MSRP: $479.00
You Save: $157.23 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Exhaust for Converter Manifold Assembly, Refer to Group 11 Exhaust.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2012 Dodge Caliber | Express, Heat, Mainstreet, R/T, Rush, SE, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Exhaust Manifold Part Number: 4884822AC
$140.95 MSRP: $894.00
You Save: $753.05 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Manifold Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Dodge Caliber | SRT-4 | 4 Cyl 2.4 L GAS
View related parts
Dodge Caliber Catalytic Converter Part Number: 5105460AF
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter with Integrated Exhaust Manifold; Exhaust Manifold
- Replaces: 5105460AD, 5105460AC, 5105460AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Caliber | R/T | 2.4L L4, 4 Cyl 2.4 L GAS

Dodge Caliber Exhaust Manifold

Choose OEM Exhaust Manifold that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Exhaust Manifold follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Caliber Exhaust Manifold is one of the critical parts that can greatly affect the performance and durability of Dodge Caliber automobiles. Made with an intention to safely channel hot exhaust gases away from the engine, it is another vital component that enables an engine to perform gallantly by preventing what is known as intake reversion. This is very significant for the Dodge Caliber which was manufactured from 2007 to 2012 and is recognized for the safety and efficiency use. The Dodge Caliber Exhaust Manifold is designed specifically for the models such as SE and SXT meaning that all the drivers will be able to make use of the model engineering. Thus, leading the exhaust gases through the catalytic converter and the muffler, the Exhaust Manifold contributes to lowering dangerous emissions, thus increasing the passengers' security. Also, it has aerodynamics consideration in the Dodge Caliber to enhance its fuel economy as well as the stability of the car in the market of compact hatchback vehicle. The manifold's construction varies, but its primary function remains consistent: to decrease end resistance and to increase the velocity of exhaust gasses, which in turn improved engine efficiency. Being a part of the exhaust system, the Dodge Caliber Exhaust Manifold plays a crucial role in smooth running of the car and its safety factor since it is affiliated with Dodge Caliber's brand image that resonates with reliability and performance. Now on city roads and now on high ways, the car Dodge Caliber alongside the Exhaust Manifold ensures a smooth and highly efficient drive.

Dodge Caliber Exhaust Manifold Parts and Q&A

Exhaust Manifold
4693321AD
Q: How to Remove and Replace an Exhaust Manifold on Dodge Caliber?
A:
Before changing the exhaust manifold on a front-wheel drive car, take off the engine cover. Lift the negative cable from the battery afterward and then unscrew the bolts attaching the top shield to pull it out. First, remove the exhaust pipe from the manifold, then get rid of the manifold support bracket. When you have done that, detach the exhaust manifold heat shield and get rid of the electrical connector for the oxygen sensor. After that, take off the retaining fasteners for the exhaust manifold and toss out the existing gasket.
Exhaust Manifold
4884822AC
Q: How to Install an Exhaust Manifold on Dodge Caliber?
A:
When installing an exhaust manifold on a front-wheel drive car, first put a new exhaust manifold gasket in place without using any sealer. Set the exhaust manifold bolts to 34 Nm (25 ft. lbs.) and after that secure the exhaust manifold heat shields with 12 Nm (9 ft. lbs.). Then, use the exhaust manifold support bracket and put a fresh gasket over the catalytic converter. Couple the exhaust pipe to the manifold, turning the fasteners to 28 Nm (250 in. lbs.). Connect the sensor's electrical connector again, plug the negative cable into the battery and then return the engine cover and tighten the bolts until they're snug.