Before servicing or repairing the parking brake shoe, always raise and support the vehicle and use brakes service precautions. Should there be issues on both sides, carry out the steps once more for each side. You should begin by undoing and taking out the rear
Brake Rotor. After that, rotate the brake shoe adjuster until it becomes its shortest length. Erase the return spring from the anchor pin and the rear brake shoe, then the return spring from the anchor pin and the front brake shoe. You should remove the brake shoe hold-down springs and pins (1, 2) by rotating them 90° away from the brake drums. Remove the
Parking Brake Cable from the lever on the back parking brake shoe and then pull out the brakes, adjuster and lower return spring as a single group from the support plate. Should they be in your way, detach the strut and then get rid of the lower spring and adjuster from the shoes (2, 6).