To install or fix the hydraulic hose, first of all open the battery cables. Then, the instrument panel lower silencer is removed and next, the knee bolster. Remove the clutch master cylinder pushrod retaining clip then release the pushrod coupling with the clutch pedal. Continue herein by unplugging the battery shield, battery and
Battery Tray. Next, remove the assembly windshield wiper module. With Disconnect tool 6638A, remove the clutch master cylinder quick connect fitting and also remove plumbing retainer. Take out the reservoir in the master cylinder to strut tower nuts and relocate the same to one side. Lastly, remove clutch master cylinder out of the dash panel, clock wise at 45 and take the master cylinder and plumbing out of the engine compartment avoiding bending or kinking the plumbing noting its routing so as to reinstall it.