How to Install a Drive Belt on a 3.5L Engine on Dodge Challenger?

Before you put the serpentine belt on a 3.5L engine, make sure that all pulleys are in good shape and that the belt is directed at the water pump correctly so that the engine won't overheat. Put the accessory drive belt on all of the pulleys except the idler pulley. Turn the tensioner arm until it is fully seated in its stop, then put the accessory drive belt around the idler pulley and allow the tensioner to move against the belt on all pulleys. During installation, make sure the indexing tang on the back of the tensioner is close to the stop inside the tensioner, since a belt is classed as new if it has run for fewer than 10-15 minutes. After you put it in place, check the wear indicator on the belt.

How to Remove and Replace the Drive Belt on a 3.5L Engine on Dodge Challenger?

Before you take off and put back the serpentine accessory drive belt on a 3.5L engine, secure the tensioner arm so the free arm doesn't slap the tensioner and cause major tensioner damage. Adjust the lip of the belt tensioner by turning it counterclockwise until it comes up against a stop and then pull the belt away. Then, gently position the tensioner into its free arm area.

OEM Dodge Challenger Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Drive Belts found

View related parts
Dodge Challenger Serpentine Belt Part Number: 4593684AA
$54.38 MSRP: $73.70
You Save: $19.32 (27%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 4861322AC, 68060352AA, 4892840AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SE | 5.7L V8, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 5184647AB
$40.25 MSRP: $57.85
You Save: $17.60 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Challenger | Rallye Redline, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 5038725AA
$47.14 MSRP: $69.85
You Save: $22.71 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 5038718AA
$35.27 MSRP: $52.55
You Save: $17.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Challenger | SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 5037542AA
$78.83 MSRP: $118.00
You Save: $39.17 (34%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine; Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | SRT8 | 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 53011324AA
$359.53 MSRP: $524.00
You Save: $164.47 (32%)
ADD TO CART
Product Specifications
- Other Name: Belt - Supercharger Drive; Accessory Drive Belt; Supercharger Belt; Belt Supercharger Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2023 Dodge Challenger | SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 68519480AA
$45.06 MSRP: $67.00
You Save: $21.94 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Supercharger Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Supercharger Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2021 Dodge Challenger | SRT Demon, SRT Hellcat, SRT Hellcat Redeye, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Super Stock | 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 68495977AA
$46.13 MSRP: $62.50
You Save: $16.37 (27%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 53013676AB, 53013676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 4861928AA
$41.47 MSRP: $59.60
You Save: $18.13 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | GT, SXT, SXT Plus | 6 Cyl 3.6 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 4627031AA
$33.70 MSRP: $48.45
You Save: $14.75 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Challenger | SRT8 | 8 Cyl 6.4 L GAS

Dodge Challenger Drive Belt

Choose OEM Drive Belt that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Drive Belt follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The drive belt in Dodge Challenger auto mobiles plays an important role as it link the engine of the vehicle to several other parts for instance an alternator and A/C compressor. Usually, a serpentine belt is utilised encompassing the above components and interconnecting them to the crankshaft pulley. This design enables the power supply to flow smoothly and enable the parts work correctly. With regards to the Drive Belts, Dodge Challenger models that have been produced over the years have used both V-belts, multi-groove belts and the like that come with different benefits as listed below. V-belts boast of better holding power while multi-groove belts increase the belt's flexibility and performance levels. Regardless of the type, owners should pay attention to the Drive Belt since the component usually degrades around 100,000 miles but may fail way before that and cause severe engine and parts troubles if not replaced.

Dodge Challenger Drive Belt Parts and Q&A

Serpentine Belt
5037542AA
Q: How to Install a Drive Belt on a 3.5L Engine on Dodge Challenger?
A:
Before you put the serpentine belt on a 3.5L engine, make sure that all pulleys are in good shape and that the belt is directed at the Water Pump correctly so that the engine won't overheat. Put the accessory drive belt on all of the pulleys except the idler pulley. Turn the tensioner arm until it is fully seated in its stop, then put the accessory drive belt around the idler pulley and allow the tensioner to move against the belt on all pulleys. During installation, make sure the indexing tang on the back of the tensioner is close to the stop inside the tensioner, since a belt is classed as new if it has run for fewer than 10-15 minutes. After you put it in place, check the wear indicator on the belt.
Serpentine Belt
4593684AA
Q: How to Remove and Replace the Drive Belt on a 3.5L Engine on Dodge Challenger?
A:
Before you take off and put back the serpentine accessory drive belt on a 3.5L engine, secure the tensioner arm so the free arm doesn't slap the tensioner and cause major tensioner damage. Adjust the lip of the belt tensioner by turning it counterclockwise until it comes up against a stop and then pull the belt away. Then, gently position the tensioner into its free arm area.