How to Install and Replace the Serpentine Belt on a 3.5L Engine on Dodge Challenger?

To remove and replace the serpentine accessory drive belt on a 3.5L engine, check the condition of all the pulleys. Proper routing of the belt during installation is important so that the water pump does not turn in the wrong direction and cause the engine to overheat. Place the accessory drive belt on all pulleys excluding the idler pulley. Rotate the tensioner arm until it contacts the stop. Route the belt around the idler pulley and allow the tensioner to rotate into the belt. Make sure the belt is located on all the pulleys. The tensioner has an indexing tang on the back and an indexing stop on the housing. When a new belt is installed, the tang should be within approximately 6 - 8mm (0.24 - 0.32 in.) of the indexing stop. A new belt is one that has been used for 15 minutes or less. Check the wear indicator for the belt after installation.

How to Remove and Replace the Serpentine Belt on a 3.5L Engine on Dodge Challenger?

To remove and replace the serpentine accessory drive belt on a 3.5L engine, don't let the tensioner arm snap back to the free arm position. If it does, the tensioner will be severely damaged. Turn the belt tensioner in the counterclockwise direction until it reaches its stop position, then take off the belt. Then, slowly rotate the tensioner to the free arm position.

OEM Dodge Challenger Serpentine Belt

Serpentine Drive Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Serpentine Belts found

View related parts
Dodge Challenger Serpentine Belt Part Number: 5038718AA
$35.27 MSRP: $52.55
You Save: $17.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Dodge Challenger | SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 53011324AA
$346.97 MSRP: $524.00
You Save: $177.03 (34%)
ADD TO CART
Product Specifications
- Other Name: Belt - Supercharger Drive; Accessory Drive Belt; Supercharger Belt; Belt Supercharger Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2023 Dodge Challenger | SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 68519480AA
$45.06 MSRP: $67.00
You Save: $21.94 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Supercharger Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Supercharger Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2021 Dodge Challenger | SRT Demon, SRT Hellcat, SRT Hellcat Redeye, SRT Hellcat Redeye Widebody, SRT Hellcat Widebody, SRT Super Stock | 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 68495977AA
$49.21 MSRP: $66.70
You Save: $17.49 (27%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 53013676AB, 53013676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Scat Pack, SRT 392, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 4861928AA
$45.70 MSRP: $65.70
You Save: $20.00 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | GT, SXT, SXT Plus | 6 Cyl 3.6 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 5184647AB
$45.70 MSRP: $65.70
You Save: $20.00 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Challenger | Rallye Redline, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 4627031AA
$35.32 MSRP: $50.70
You Save: $15.38 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Challenger | SRT8 | 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 5038725AA
$48.60 MSRP: $69.85
You Save: $21.25 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 8 Cyl 6.2 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 4593684AA
$57.39 MSRP: $84.40
You Save: $27.01 (32%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 4861322AC, 68060352AA, 4892840AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Challenger | R/T, SE | 5.7L V8, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Challenger Serpentine Belt Part Number: 5037542AA
$80.10 MSRP: $118.00
You Save: $37.90 (33%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine; Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Challenger | SRT8 | 8 Cyl 6.1 L GAS
View related parts
Dodge Challenger Belt Tensioner Part Number: 53011558AA
$114.43 MSRP: $169.00
You Save: $54.57 (33%)
Product Specifications
- Other Name: Tensioner - Supercharger Drive Belt; Accessory Drive Belt Tensioner Assembly; Serpentine Belt Drive Kit; Serpentine Tensioner; Tensioner
- Replaced by: 68617113AA
- Replaces: 68222744AE, 68222744AC, 68222744AB, 68222744AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2023 Dodge Challenger | SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock | 8 Cyl 6.2 L GAS

Dodge Challenger Serpentine Belt

Choose OEM Serpentine Belt that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Serpentine Belt follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Challenger Serpentine Belt is a single continuous drive belt that transmits the engine's power to the belt-driven components. It keeps the essential systems on the Dodge Challenger operational. The Dodge Challenger utilizes one flexible ribbed belt that wraps around the pulleys of four components including the alternator, power steering pump, air conditioning compressor, and water pump. Each of these components has its own specific purpose of charging the battery, circulating coolant, and providing assisted steering and cabin climate control. However, the use of one single belt for each of these components is good engineering as it will not require a separate belt for each component. The tension of the Serpentine Belt which prevents slippage when the engine runs is maintained optimally due to the idler pulley and automatic tensioner gripping the Serpentine Belt strongly. Due to the constant loading and heating of the Serpentine Belt, its rubber ribs can wear, crack or glaze. If the belt breaks the Dodge Challenger will quickly lose electrical charging, steering assist, air conditioning and even engine cooling. This may stop you from driving. Frequent inspections for fraying, missing ribs, or glazing will let you replace the Serpentine Belt before it fails and help ensure overall reliability of the Serpentine Belt drive system.

Dodge Challenger Serpentine Belt Parts and Q&A

Serpentine Belt
4593684AA
Q:
How to Install and Replace the Serpentine Belt on a 3.5L Engine on Dodge Challenger?
A:
To remove and replace the serpentine accessory drive belt on a 3.5L engine, check the condition of all the pulleys. Proper routing of the belt during installation is important so that the Water Pump does not turn in the wrong direction and cause the engine to overheat. Place the accessory drive belt on all pulleys excluding the idler pulley. Rotate the tensioner arm until it contacts the stop. Route the belt around the idler pulley and allow the tensioner to rotate into the belt. Make sure the belt is located on all the pulleys. The tensioner has an indexing tang on the back and an indexing stop on the housing. When a new belt is installed, the tang should be within approximately 6 - 8mm (0.24 - 0.32 in.) of the indexing stop. A new belt is one that has been used for 15 minutes or less. Check the wear indicator for the belt after installation.
Serpentine Belt
5037542AA
Q:
How to Remove and Replace the Serpentine Belt on a 3.5L Engine on Dodge Challenger?
A:
To remove and replace the serpentine accessory drive belt on a 3.5L engine, don't let the tensioner arm snap back to the free arm position. If it does, the tensioner will be severely damaged. Turn the belt tensioner in the counterclockwise direction until it reaches its stop position, then take off the belt. Then, slowly rotate the tensioner to the free arm position.