JeepParts
My Garage
My Account
Cart
OEM Dodge Challenger Fuel Filler Neck
Fuel Tank Filler Neck Hose Pipe- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Fuel Filler Necks found
Dodge Challenger Tube - Fuel Filler Part Number: 68534592AC
$73.99 MSRP: $157.00You Save: $83.01 (53%)Ships in 1-2 Business Days
Dodge Challenger Filler Neck Part Number: 4578989AB
Dodge Challenger Filler Neck, Upper Part Number: 4726867AB
Dodge Challenger Fuel Filler Neck
Choose OEM Fuel Filler Neck that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fuel Filler Neck follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
Dodge Challenger Fuel Filler Neck Parts and Q&A
- Q: How to Install a Fuel Filler Neck on Dodge Challenger?A:Assemble the filler tube and ensure the groove on its rubber piece fits the sheet metal on the car when you begin installing the fuel filler neck. Push the tube into the rubber hose on the fuel tank, add the hose clamp and tighten it firmly. After that, attach the filler tube mounting bolt (1) and the filler tube vent line (2). Rewire the splash shield (1) and then the left inner splash shield under the car before installing the last tire. Carry the vehicle down on the dial socket and check that the rubber hose sits properly in the opening on the vehicle, making sure the sheet metal fits into the rubber hose's groove as it's secured to the vehicle body. Begin the retaining wire in the internal groove of the filler tube rubber and work it around the rubber. After that, link the negative Battery Cable to the battery (1) and fill your fuel tank.
- Q: How to Service and Repair a Fuel Filler Neck on Dodge Challenger?A:First, take care of these steps, disconnect the negative Battery Cable and drain fuel from the tank. Open the door of the filler tube and take the retaining wire out of the inner rubber compartment. Press and slide the rubber part of the grommet while squeezing the body sheet metal which takes the rubber and filler tube out of the body. Support and raise the vehicle, then get rid of the rear left tire and the left splash guard. Take out the filler tube vent line (2) and the mounting bolt (1) for the under body splash shield. Ease off the filler tube hose clamp so the hose and tank area is kept tight and then slide the clamp towards the fuel tank. In the last step, take out the filler tube assembly from the vehicle.
Related Dodge Challenger Parts
Dodge Challenger Fuel Pump
Dodge Challenger Gas Cap
Dodge Challenger Fuel Tank
Dodge Challenger Intake Manifold
Dodge Challenger Fuel Injector Seal
Dodge Challenger Fuel Level Sensor
Dodge Challenger Fuel Pump Gasket
Dodge Challenger Fuel Pump Seal
Dodge Challenger Fuel Rail
Dodge Challenger Fuel Sending Unit
Dodge Challenger Fuel Tank Lock Ring
Dodge Challenger Fuel Tank Strap