How is a Hood Hinge Installed on Dodge Challenger?

Put the lower bracket of the hood hinge inside the front fender ledge on your vehicle. Fit and tighten the two screws that connect the hinge to the fender to a force of 28 Nm. After that, set the hood panel on the upper hinge bracket on the car and insert and secure the two hinge screws, each tightened to 28 Nm (21 ft. lbs.). Release the gas cylinder half from the top of the machine, align it over the bracket on top and repeat the installation if needed. Then, remove the support bars and close the hood. Once done, modify the hinge location on the hood so that both parts work optimally and are a proper distance apart.

How to remove a hood hinge on Dodge Challenger?

Before removing the hood hinge, prop the hood up with a proper support. If you have one, disconnect the top of the cylinder from the upper bracket that holds the hood hinge. Mark where you need to install the upper bracket of the hood hinge inside the hood panel. After that, unscrew the screws holding the hinge to the hood's side. In addition, mark the position of the hinge lower bracket on the front fender ledge for help when putting everything back together. Next, get rid of the two screws on the hinge and remove the hood hinge from your car.

OEM Dodge Challenger Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Hinges found

View related parts
Dodge Challenger Hinge, Front Driver Side Part Number: 5065265AL
$53.90 MSRP: $110.00
You Save: $56.10 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 5065265AJ, 5065265AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Hinge, Front Passenger Side Part Number: 5065264AL
$53.90 MSRP: $110.00
You Save: $56.10 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 5065264AK, 5065264AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

Dodge Challenger Hood Hinge

Choose OEM Hood Hinge that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Hood Hinge follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Challenger Hood Hinge Parts and Q&A

Hinge, Front Passenger Side
5065264AL
Q: How is a Hood Hinge Installed on Dodge Challenger?
A:
Put the lower bracket of the hood hinge inside the front fender ledge on your vehicle. Fit and tighten the two screws that connect the hinge to the fender to a force of 28 Nm. After that, set the hood panel on the upper hinge bracket on the car and insert and secure the two hinge screws, each tightened to 28 Nm (21 ft. lbs.). Release the gas cylinder half from the top of the machine, align it over the bracket on top and repeat the installation if needed. Then, remove the support bars and close the hood. Once done, modify the hinge location on the hood so that both parts work optimally and are a proper distance apart.
Hinge, Front Driver Side
5065265AL
Q: How to remove a hood hinge on Dodge Challenger?
A:
Before removing the hood hinge, prop the hood up with a proper support. If you have one, disconnect the top of the cylinder from the upper bracket that holds the hood hinge. Mark where you need to install the upper bracket of the hood hinge inside the hood panel. After that, unscrew the screws holding the hinge to the hood's side. In addition, mark the position of the hinge lower bracket on the front fender ledge for help when putting everything back together. Next, get rid of the two screws on the hinge and remove the hood hinge from your car.