How to Install a Liftgate Hinge on Dodge Challenger?

The first step of installation is to attach the lower bracket of the decklid hinge to the drain trough on the automobile. The third step is to add and tighten the fasteners attaching the hinge to the drain trough to a torque of 28 Nm (21 ft. lbs.). Then, fit the decklid onto the upper hinge bracket and lock it in place with 28 Nm (21 ft. lbs.) of fasteners. After that, put the support cylinder onto the decklid hinge. With the bolts removed, take out the fixture and set the decklid in place. After everything is installed, adjust the hinge for the decklid as required to suit the panel and make it operate properly.

How to Remove a Liftgate Hinge on Dodge Challenger?

Before attempting to remove the trunk or liftgate hinge, raise and support the deck lid with a duringdeck prop or block. After that, unmount the support cylinder from the deck lid hinge. Make a note of the upper hinge bracket position on the deck lid inside so you remember where to place them when assembling again. After that, take out the fasteners that hold the hinge to the deck lid. Just like the upper bracket, note the location for the lower hinge bracket before removing the drain trough. Afterward, remove the hinges that hold the deck to the drain tray and then remove the deck lid hinge from the vehicle.

OEM Dodge Challenger Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Liftgate Hinges found

View related parts
Dodge Challenger Hinge, Rear Driver Side Part Number: 4589667AE
$74.54 MSRP: $112.00
You Save: $37.46 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Deck Lid; Deck Lid Hinge, Rear Left; Door Hinge; Hinge Deck Lid
- Position: Rear Driver Side
- Replaces: 4589667AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Hinge, Rear Passenger Side Part Number: 4589666AE
$74.54 MSRP: $112.00
You Save: $37.46 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Deck Lid; Deck Lid Hinge, Rear Right; Door Hinge; Hinge Deck Lid
- Position: Rear Passenger Side
- Replaces: 4589666AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Dodge Challenger | 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L GAS, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Hinge, Rear Driver Side Part Number: 4589667AC
$40.43 MSRP: $58.10
You Save: $17.67 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Deck Lid; Deck Lid Hinge, Rear Left; Door Hinge
- Position: Rear Driver Side
- Replaces: 4589667AB, 4589667AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Dodge Challenger | R/T, SE, SRT8 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
Dodge Challenger Hinge, Rear Passenger Side Part Number: 4589666AC
$40.43 MSRP: $58.10
You Save: $17.67 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Deck Lid; Deck Lid Hinge, Rear Right; Door Hinge
- Position: Rear Passenger Side
- Replaces: 4589666AB, 4589666AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Dodge Challenger | R/T, SE, SRT8 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS

Dodge Challenger Liftgate Hinge

Choose OEM Liftgate Hinge that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Liftgate Hinge follows strict manufacturing steps to lock in quality and fit. If your Dodge Challenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Challenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Challenger Liftgate Hinge functions as an essential part that guarantees the seamless operation of rear trunk or tailgate compartments for Dodge Challenger vehicle users both safely and efficiently. The Liftgate Hinge operates with reputation for reliability through opening and closing the storage compartment by supporting the trunk or tailgate lid securely when open. Proper selection of a Liftgate Hinge depends on model compatibility because each model has distinct specifications. Repetitive use and environmental contact will eventually damage the liftgate hinge units causing them to malfunction or align improperly. For the Dodge Challenger to perform optimally its Liftgate Hinge requires proper maintenance alongside immediate replacement. The Liftgate Hinge serves to enhance vehicle performance as well as functioning as the primary safety mechanism for protecting trunk or tailgate operations when the vehicle is in use. In the automotive market the Dodge Challenger Liftgate Hinge achieves recognition because of both its construction quality and specific design which guards against daily automotive use. This part construct from Dodge Challenger has proven itself in the market while demonstrating the brand's dedication to enduring quality thus becoming fundamental to the automaker model's total experience.

Dodge Challenger Liftgate Hinge Parts and Q&A

Hinge, Rear Driver Side
4589667AC
Q: How to Install a Liftgate Hinge on Dodge Challenger?
A:
The first step of installation is to attach the lower bracket of the decklid hinge to the drain trough on the automobile. The third step is to add and tighten the fasteners attaching the hinge to the drain trough to a torque of 28 Nm (21 ft. lbs.). Then, fit the decklid onto the upper hinge bracket and lock it in place with 28 Nm (21 ft. lbs.) of fasteners. After that, put the support cylinder onto the decklid hinge. With the bolts removed, take out the fixture and set the decklid in place. After everything is installed, adjust the hinge for the decklid as required to suit the panel and make it operate properly.
Hinge, Rear Passenger Side
4589666AC
Q: How to Remove a Liftgate Hinge on Dodge Challenger?
A:
Before attempting to remove the trunk or liftgate hinge, raise and support the deck lid with a duringdeck prop or block. After that, unmount the support cylinder from the deck lid hinge. Make a note of the upper hinge bracket position on the deck lid inside so you remember where to place them when assembling again. After that, take out the fasteners that hold the hinge to the deck lid. Just like the upper bracket, note the location for the lower hinge bracket before removing the drain trough. Afterward, remove the hinges that hold the deck to the drain tray and then remove the deck lid hinge from the vehicle.